netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: jgarzik@pobox.com, netdev@oss.sgi.com
Subject: [PATCH 2.6.12-rc5 4/9] tg3: Add parameter to tg3_halt
Date: Thu, 26 May 2005 10:58:18 -0700	[thread overview]
Message-ID: <1117130298.3744.55.camel@rh4> (raw)
In-Reply-To: <1117128795.3744.22.camel@rh4>

[-- Attachment #1: Type: text/plain, Size: 263 bytes --]

Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND
parameter can be passed to tg3_halt() before doing offline tests.

All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN
parameter.

Signed-off-by: Michael Chan <mchan@broadcom.com>

[-- Attachment #2: tg3-d4.patch --]
[-- Type: text/x-patch, Size: 3136 bytes --]

diff -Nru d3/drivers/net/tg3.c d4/drivers/net/tg3.c
--- d3/drivers/net/tg3.c	2005-05-25 12:59:09.000000000 -0700
+++ d4/drivers/net/tg3.c	2005-05-25 12:59:17.000000000 -0700
@@ -3083,7 +3083,7 @@
 }
 
 static int tg3_init_hw(struct tg3 *);
-static int tg3_halt(struct tg3 *, int);
+static int tg3_halt(struct tg3 *, int, int);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void tg3_poll_controller(struct net_device *dev)
@@ -3107,7 +3107,7 @@
 	restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
 	tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
 
-	tg3_halt(tp, 0);
+	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
 	tg3_init_hw(tp);
 
 	tg3_netif_start(tp);
@@ -3453,7 +3453,7 @@
 	spin_lock_irq(&tp->lock);
 	spin_lock(&tp->tx_lock);
 
-	tg3_halt(tp, 1);
+	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 
 	tg3_set_mtu(dev, tp, new_mtu);
 
@@ -4144,19 +4144,19 @@
 }
 
 /* tp->lock is held. */
-static int tg3_halt(struct tg3 *tp, int silent)
+static int tg3_halt(struct tg3 *tp, int kind, int silent)
 {
 	int err;
 
 	tg3_stop_fw(tp);
 
-	tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN);
+	tg3_write_sig_pre_reset(tp, kind);
 
 	tg3_abort_hw(tp, silent);
 	err = tg3_chip_reset(tp);
 
-	tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN);
-	tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
+	tg3_write_sig_legacy(tp, kind);
+	tg3_write_sig_post_reset(tp, kind);
 
 	if (err)
 		return err;
@@ -5997,7 +5997,7 @@
 	spin_lock_irq(&tp->lock);
 	spin_lock(&tp->tx_lock);
 
-	tg3_halt(tp, 1);
+	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 	err = tg3_init_hw(tp);
 
 	spin_unlock(&tp->tx_lock);
@@ -6073,7 +6073,7 @@
 
 	err = tg3_init_hw(tp);
 	if (err) {
-		tg3_halt(tp, 1);
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_free_rings(tp);
 	} else {
 		if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
@@ -6117,7 +6117,7 @@
 				pci_disable_msi(tp->pdev);
 				tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
 			}
-			tg3_halt(tp, 1);
+			tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 			tg3_free_rings(tp);
 			tg3_free_consistent(tp);
 
@@ -6390,7 +6390,7 @@
 
 	tg3_disable_ints(tp);
 
-	tg3_halt(tp, 1);
+	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 	tg3_free_rings(tp);
 	tp->tg3_flags &=
 		~(TG3_FLAG_INIT_COMPLETE |
@@ -7110,7 +7110,7 @@
 	tp->tx_pending = ering->tx_pending;
 
 	if (netif_running(dev)) {
-		tg3_halt(tp, 1);
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_init_hw(tp);
 		tg3_netif_start(tp);
 	}
@@ -7153,7 +7153,7 @@
 		tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;
 
 	if (netif_running(dev)) {
-		tg3_halt(tp, 1);
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_init_hw(tp);
 		tg3_netif_start(tp);
 	}
@@ -9586,7 +9586,7 @@
 	    (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
 		pci_save_state(tp->pdev);
 		tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
-		tg3_halt(tp, 1);
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 	}
 
 	err = tg3_test_dma(tp);
@@ -9713,7 +9713,7 @@
 
 	spin_lock_irq(&tp->lock);
 	spin_lock(&tp->tx_lock);
-	tg3_halt(tp, 1);
+	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 	spin_unlock(&tp->tx_lock);
 	spin_unlock_irq(&tp->lock);
 

  parent reply	other threads:[~2005-05-26 17:58 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-05-26 17:33 [PATCH 2.6.12-rc5 0/9] tg3: Add ethtool selftest Michael Chan
2005-05-26 17:56 ` [PATCH 2.6.12-rc5 1/9] tg3: Add basic selftest infrastructure Michael Chan
2005-05-26 17:57 ` [PATCH 2.6.12-rc5 2/9] tg3: Add nvram test Michael Chan
2005-05-26 17:57 ` [PATCH 2.6.12-rc5 3/9] tg3: Add link test Michael Chan
2005-05-26 17:58 ` Michael Chan [this message]
2005-05-26 17:58 ` [PATCH 2.6.12-rc5 5/9] tg3: Add register test Michael Chan
2005-05-26 17:58 ` [PATCH 2.6.12-rc5 6/9] tg3: Add memory test Michael Chan
2005-05-26 17:59 ` [PATCH 2.6.12-rc5 7/9] tg3: Add loopback test Michael Chan
2005-05-26 17:59 ` [PATCH 2.6.12-rc5 8/9] tg3: Add interrupt test Michael Chan
2005-05-26 18:00 ` [PATCH 2.6.12-rc5 9/9] tg3: Fix bug in tg3_load_firmware_cpu Michael Chan
2005-05-26 19:13   ` Jeff Garzik
2005-05-26 22:10   ` David S. Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1117130298.3744.55.camel@rh4 \
    --to=mchan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=jgarzik@pobox.com \
    --cc=netdev@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).