From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: jgarzik@pobox.com, netdev@oss.sgi.com
Subject: [PATCH 2.6.12-rc5 5/9] tg3: Add register test
Date: Thu, 26 May 2005 10:58:32 -0700 [thread overview]
Message-ID: <1117130312.3744.57.camel@rh4> (raw)
In-Reply-To: <1117128795.3744.22.camel@rh4>
[-- Attachment #1: Type: text/plain, Size: 49 bytes --]
Signed-off-by: Michael Chan <mchan@broadcom.com>
[-- Attachment #2: tg3-d5.patch --]
[-- Type: text/x-patch, Size: 7840 bytes --]
diff -Nru d4/drivers/net/tg3.c d5/drivers/net/tg3.c
--- d4/drivers/net/tg3.c 2005-05-25 12:59:17.000000000 -0700
+++ d5/drivers/net/tg3.c 2005-05-25 12:59:24.000000000 -0700
@@ -7307,6 +7307,219 @@
return -EIO;
}
+/* Only test the commonly used registers */
+static int tg3_test_registers(struct tg3 *tp)
+{
+ int i, is_5705;
+ u32 offset, read_mask, write_mask, val, save_val, read_val;
+ static struct {
+ u16 offset;
+ u16 flags;
+#define TG3_FL_5705 0x1
+#define TG3_FL_NOT_5705 0x2
+#define TG3_FL_NOT_5788 0x4
+ u32 read_mask;
+ u32 write_mask;
+ } reg_tbl[] = {
+ /* MAC Control Registers */
+ { MAC_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x00ef6f8c },
+ { MAC_MODE, TG3_FL_5705,
+ 0x00000000, 0x01ef6b8c },
+ { MAC_STATUS, TG3_FL_NOT_5705,
+ 0x03800107, 0x00000000 },
+ { MAC_STATUS, TG3_FL_5705,
+ 0x03800100, 0x00000000 },
+ { MAC_ADDR_0_HIGH, 0x0000,
+ 0x00000000, 0x0000ffff },
+ { MAC_ADDR_0_LOW, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_RX_MTU_SIZE, 0x0000,
+ 0x00000000, 0x0000ffff },
+ { MAC_TX_MODE, 0x0000,
+ 0x00000000, 0x00000070 },
+ { MAC_TX_LENGTHS, 0x0000,
+ 0x00000000, 0x00003fff },
+ { MAC_RX_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x000007fc },
+ { MAC_RX_MODE, TG3_FL_5705,
+ 0x00000000, 0x000007dc },
+ { MAC_HASH_REG_0, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_1, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_2, 0x0000,
+ 0x00000000, 0xffffffff },
+ { MAC_HASH_REG_3, 0x0000,
+ 0x00000000, 0xffffffff },
+
+ /* Receive Data and Receive BD Initiator Control Registers. */
+ { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705,
+ 0x00000000, 0x00000003 },
+ { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+0, 0x0000,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+4, 0x0000,
+ 0x00000000, 0xffffffff },
+ { RCVDBDI_STD_BD+8, 0x0000,
+ 0x00000000, 0xffff0002 },
+ { RCVDBDI_STD_BD+0xc, 0x0000,
+ 0x00000000, 0xffffffff },
+
+ /* Receive BD Initiator Control Registers. */
+ { RCVBDI_STD_THRESH, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { RCVBDI_STD_THRESH, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+
+ /* Host Coalescing Control Registers. */
+ { HOSTCC_MODE, TG3_FL_NOT_5705,
+ 0x00000000, 0x00000004 },
+ { HOSTCC_MODE, TG3_FL_5705,
+ 0x00000000, 0x000000f6 },
+ { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOL_TICKS, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOL_TICKS, TG3_FL_5705,
+ 0x00000000, 0x000003ff },
+ { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
+ 0x00000000, 0x000000ff },
+ { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000,
+ 0x00000000, 0xffffffff },
+ { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000,
+ 0xffffffff, 0x00000000 },
+ { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000,
+ 0xffffffff, 0x00000000 },
+
+ /* Buffer Manager Control Registers. */
+ { BUFMGR_MB_POOL_ADDR, 0x0000,
+ 0x00000000, 0x007fff80 },
+ { BUFMGR_MB_POOL_SIZE, 0x0000,
+ 0x00000000, 0x007fffff },
+ { BUFMGR_MB_RDMA_LOW_WATER, 0x0000,
+ 0x00000000, 0x0000003f },
+ { BUFMGR_MB_MACRX_LOW_WATER, 0x0000,
+ 0x00000000, 0x000001ff },
+ { BUFMGR_MB_HIGH_WATER, 0x0000,
+ 0x00000000, 0x000001ff },
+ { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705,
+ 0xffffffff, 0x00000000 },
+ { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705,
+ 0xffffffff, 0x00000000 },
+
+ /* Mailbox Registers */
+ { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000,
+ 0x00000000, 0x000001ff },
+ { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705,
+ 0x00000000, 0x000001ff },
+ { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000,
+ 0x00000000, 0x000007ff },
+ { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000,
+ 0x00000000, 0x000001ff },
+
+ { 0xffff, 0x0000, 0x00000000, 0x00000000 },
+ };
+
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ is_5705 = 1;
+ else
+ is_5705 = 0;
+
+ for (i = 0; reg_tbl[i].offset != 0xffff; i++) {
+ if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705))
+ continue;
+
+ if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705))
+ continue;
+
+ if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
+ (reg_tbl[i].flags & TG3_FL_NOT_5788))
+ continue;
+
+ offset = (u32) reg_tbl[i].offset;
+ read_mask = reg_tbl[i].read_mask;
+ write_mask = reg_tbl[i].write_mask;
+
+ /* Save the original register content */
+ save_val = tr32(offset);
+
+ /* Determine the read-only value. */
+ read_val = save_val & read_mask;
+
+ /* Write zero to the register, then make sure the read-only bits
+ * are not changed and the read/write bits are all zeros.
+ */
+ tw32(offset, 0);
+
+ val = tr32(offset);
+
+ /* Test the read-only and read/write bits. */
+ if (((val & read_mask) != read_val) || (val & write_mask))
+ goto out;
+
+ /* Write ones to all the bits defined by RdMask and WrMask, then
+ * make sure the read-only bits are not changed and the
+ * read/write bits are all ones.
+ */
+ tw32(offset, read_mask | write_mask);
+
+ val = tr32(offset);
+
+ /* Test the read-only bits. */
+ if ((val & read_mask) != read_val)
+ goto out;
+
+ /* Test the read/write bits. */
+ if ((val & write_mask) != write_mask)
+ goto out;
+
+ tw32(offset, save_val);
+ }
+
+ return 0;
+
+out:
+ printk(KERN_ERR PFX "Register test failed at offset %x\n", offset);
+ tw32(offset, save_val);
+ return -EIO;
+}
+
static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
u64 *data)
{
@@ -7322,6 +7535,34 @@
etest->flags |= ETH_TEST_FL_FAILED;
data[1] = 1;
}
+ if (etest->flags & ETH_TEST_FL_OFFLINE) {
+ if (netif_running(dev))
+ tg3_netif_stop(tp);
+
+ spin_lock_irq(&tp->lock);
+ spin_lock(&tp->tx_lock);
+
+ tg3_halt(tp, RESET_KIND_SUSPEND, 1);
+ tg3_nvram_lock(tp);
+ tg3_halt_cpu(tp, RX_CPU_BASE);
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ tg3_halt_cpu(tp, TX_CPU_BASE);
+ tg3_nvram_unlock(tp);
+
+ if (tg3_test_registers(tp) != 0) {
+ etest->flags |= ETH_TEST_FL_FAILED;
+ data[2] = 1;
+ }
+
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+ if (netif_running(dev)) {
+ tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
+ tg3_init_hw(tp);
+ tg3_netif_start(tp);
+ }
+ spin_unlock(&tp->tx_lock);
+ spin_unlock_irq(&tp->lock);
+ }
}
static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
next prev parent reply other threads:[~2005-05-26 17:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-26 17:33 [PATCH 2.6.12-rc5 0/9] tg3: Add ethtool selftest Michael Chan
2005-05-26 17:56 ` [PATCH 2.6.12-rc5 1/9] tg3: Add basic selftest infrastructure Michael Chan
2005-05-26 17:57 ` [PATCH 2.6.12-rc5 2/9] tg3: Add nvram test Michael Chan
2005-05-26 17:57 ` [PATCH 2.6.12-rc5 3/9] tg3: Add link test Michael Chan
2005-05-26 17:58 ` [PATCH 2.6.12-rc5 4/9] tg3: Add parameter to tg3_halt Michael Chan
2005-05-26 17:58 ` Michael Chan [this message]
2005-05-26 17:58 ` [PATCH 2.6.12-rc5 6/9] tg3: Add memory test Michael Chan
2005-05-26 17:59 ` [PATCH 2.6.12-rc5 7/9] tg3: Add loopback test Michael Chan
2005-05-26 17:59 ` [PATCH 2.6.12-rc5 8/9] tg3: Add interrupt test Michael Chan
2005-05-26 18:00 ` [PATCH 2.6.12-rc5 9/9] tg3: Fix bug in tg3_load_firmware_cpu Michael Chan
2005-05-26 19:13 ` Jeff Garzik
2005-05-26 22:10 ` David S. Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1117130312.3744.57.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=jgarzik@pobox.com \
--cc=netdev@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).