* Re: [Bugme-new] [Bug 6638] New: tg3 output freezes on compaq nc6000
[not found] <200606021240.k52CepX2017904@fire-2.osdl.org>
@ 2006-06-02 18:22 ` Andrew Morton
2006-06-02 21:23 ` Michael Chan
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Morton @ 2006-06-02 18:22 UTC (permalink / raw)
To: bugme-daemon@kernel-bugs.osdl.org; +Cc: netdev, Klaus.Reichl
On Fri, 2 Jun 2006 05:40:51 -0700
bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=6638
>
> Summary: tg3 output freezes on compaq nc6000
> Kernel Version: 2.6.16.19
> Status: NEW
> Severity: normal
> Owner: jgarzik@pobox.com
> Submitter: Klaus.Reichl@alcatel.at
>
>
> Most recent kernel where this bug did not occur: none
> Distribution: Debian Sarge with latest kernel
> Hardware Environment: compaq nc6000
> Software Environment:
> Problem Description:
> The output engine of the tg3 driver freezes when generating high load.
>
> `ifconfig' shows incomming packets, however, outgoing counter is not incremented
> any more.
>
> Resetting the device (ifdown eth0, ifup eth0) heals the problem.
>
> Steps to reproduce:
> Heavily copy files to NFS disk.
>
> ------- You are receiving this mail because: -------
> You are on the CC list for the bug, or are watching someone who is.
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [Bugme-new] [Bug 6638] New: tg3 output freezes on compaq nc6000
2006-06-02 18:22 ` [Bugme-new] [Bug 6638] New: tg3 output freezes on compaq nc6000 Andrew Morton
@ 2006-06-02 21:23 ` Michael Chan
0 siblings, 0 replies; 2+ messages in thread
From: Michael Chan @ 2006-06-02 21:23 UTC (permalink / raw)
To: Andrew Morton; +Cc: bugme-daemon@kernel-bugs.osdl.org, netdev, Klaus.Reichl
On Fri, 2006-06-02 at 11:22 -0700, Andrew Morton wrote:
> On Fri, 2 Jun 2006 05:40:51 -0700
> bugme-daemon@bugzilla.kernel.org wrote:
>
> > http://bugzilla.kernel.org/show_bug.cgi?id=6638
> >
> > Summary: tg3 output freezes on compaq nc6000
> > Kernel Version: 2.6.16.19
> > Status: NEW
> > Severity: normal
> > Owner: jgarzik@pobox.com
> > Submitter: Klaus.Reichl@alcatel.at
> >
> >
> > Most recent kernel where this bug did not occur: none
> > Distribution: Debian Sarge with latest kernel
> > Hardware Environment: compaq nc6000
> > Software Environment:
> > Problem Description:
> > The output engine of the tg3 driver freezes when generating high load.
> >
> > `ifconfig' shows incomming packets, however, outgoing counter is not incremented
> > any more.
> >
Please provide:
1. tg3 probing output during ifconfig up.
2. /proc/interrupts output to see if interrupt counter is increasing
after failure.
3. "ethtool -d eth0 > dump" after the failure.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-06-02 23:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <200606021240.k52CepX2017904@fire-2.osdl.org>
2006-06-02 18:22 ` [Bugme-new] [Bug 6638] New: tg3 output freezes on compaq nc6000 Andrew Morton
2006-06-02 21:23 ` Michael Chan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).