netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH] tg3: Add ipv6 TSO feature
Date: Fri, 30 Jun 2006 16:35:12 -0700	[thread overview]
Message-ID: <1151710512.3645.5.camel@rh4> (raw)

Enable ipv6 TSO feature on chips that support it.

Update version to 3.61.

Signed-off-by: Michael Chan <mchan@broadcom.com>


diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 47c96fc..b992c0a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.61"
-#define DRV_MODULE_RELDATE	"June 29, 2006"
+#define DRV_MODULE_VERSION	"3.62"
+#define DRV_MODULE_RELDATE	"June 30, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -3799,18 +3799,24 @@ static int tg3_start_xmit(struct sk_buff
 			goto out_unlock;
 		}
 
-		tcp_opt_len = ((skb->h.th->doff - 5) * 4);
-		ip_tcp_len = (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+			mss |= (skb_headlen(skb) - ETH_HLEN) << 9;
+		else {
+			tcp_opt_len = ((skb->h.th->doff - 5) * 4);
+			ip_tcp_len = (skb->nh.iph->ihl * 4) +
+				     sizeof(struct tcphdr);
+
+			skb->nh.iph->check = 0;
+			skb->nh.iph->tot_len = htons(mss + ip_tcp_len +
+						     tcp_opt_len);
+			mss |= (ip_tcp_len + tcp_opt_len) << 9;
+		}
 
 		base_flags |= (TXD_FLAG_CPU_PRE_DMA |
 			       TXD_FLAG_CPU_POST_DMA);
 
-		skb->nh.iph->check = 0;
-		skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
-
 		skb->h.th->check = 0;
 
-		mss |= (ip_tcp_len + tcp_opt_len) << 9;
 	}
 	else if (skb->ip_summed == CHECKSUM_HW)
 		base_flags |= TXD_FLAG_TCPUDP_CSUM;
@@ -7888,6 +7894,12 @@ static int tg3_set_tso(struct net_device
 			return -EINVAL;
 		return 0;
 	}
+	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) {
+		if (value)
+			dev->features |= NETIF_F_TSO6;
+		else
+			dev->features &= ~NETIF_F_TSO6;
+	}
 	return ethtool_op_set_tso(dev, value);
 }
 #endif
@@ -11508,8 +11520,11 @@ static int __devinit tg3_init_one(struct
 	 * Firmware TSO on older chips gives lower performance, so it
 	 * is off by default, but can be enabled using ethtool.
 	 */
-	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
 		dev->features |= NETIF_F_TSO;
+		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)
+			dev->features |= NETIF_F_TSO6;
+	}
 
 #endif
 



             reply	other threads:[~2006-06-30 23:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-30 23:35 Michael Chan [this message]
2006-07-04  2:42 ` [PATCH] tg3: Add ipv6 TSO feature David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1151710512.3645.5.camel@rh4 \
    --to=mchan@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).