From: Dan Williams <dcbw@redhat.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bcm43xx-dev@lists.berlios.de, netdev@vger.kernel.org
Subject: Re: bcm43xx driver unstable behaviour (and linux wireless is junk btw)
Date: Sat, 23 Sep 2006 23:50:57 -0400 [thread overview]
Message-ID: <1159069857.2748.5.camel@localhost.localdomain> (raw)
In-Reply-To: <1159065798.5924.8.camel@localhost.localdomain>
On Sun, 2006-09-24 at 12:43 +1000, Benjamin Herrenschmidt wrote:
> Hi folks !
>
> So this is 2.6.18 + Larry "fix" (though I've seen this problem before,
> it seems using WPA just make it happen more often).
>
> This is also a 4318, so the link is pretty weak due to the Tx Power
> problem and I suspects it makes the driver problems more visible...
>
> So basically, I "lose" the link every few minutes for a minute or so, I
> suspect it's related to wpa_supplicant vs. the ack losses due to the
> 4318 Tx Power problems. That alone would be ok though, if the driver
> wasn't totally stuck after a while. (Similar problem to after
> sleep/wakeup, looks like nothign goes through).
>
> When it goes bunk, it looks like that in the logs:
>
> Sep 24 12:24:18 localhost kernel: [ 285.686826] SoftMAC: Sent Authentication Request to 00:0f:66:52:4b:60.
> Sep 24 12:24:18 localhost kernel: [ 285.686976] SoftMAC: generic IE set to <....>
> Sep 24 12:24:18 localhost kernel: [ 285.686999] SoftMAC: Already associating or associated to 00:0f:66:52:4b:60
> Sep 24 12:24:28 localhost kernel: [ 295.687229] SoftMAC: Start scanning with channel: 1
> Sep 24 12:24:28 localhost kernel: [ 295.687240] SoftMAC: Scanning 14 channels
> Sep 24 12:24:29 localhost kernel: [ 296.027053] SoftMAC: Scanning finished
> Sep 24 12:24:29 localhost kernel: [ 296.035267] SoftMAC: generic IE set to <....>
> Sep 24 12:24:29 localhost kernel: [ 296.035310] SoftMAC: Already associating or associated to 00:0f:66:52:4b:60
> Sep 24 12:24:31 localhost kernel: [ 297.690969] SoftMAC: Sent Authentication Request to 00:0f:66:52:4b:60.
> Sep 24 12:24:39 localhost kernel: [ 306.039210] SoftMAC: Start scanning with channel: 1
> Sep 24 12:24:39 localhost kernel: [ 306.039222] SoftMAC: Scanning 14 channels
> Sep 24 12:24:39 localhost kernel: [ 306.375046] SoftMAC: Scanning finished
> Sep 24 12:24:39 localhost kernel: [ 306.383018] SoftMAC: generic IE set to <....>
> Sep 24 12:24:39 localhost kernel: [ 306.383075] SoftMAC: Already associating or associated to 00:0f:66:52:4b:60
> Sep 24 12:24:42 localhost kernel: [ 309.695021] SoftMAC: Sent Authentication Request to 00:0f:66:52:4b:60.
> Sep 24 12:24:49 localhost kernel: [ 316.387211] SoftMAC: Start scanning with channel: 1
>
> etc...
>
> Then, if you rmmod, you get back a prompt, and about a second later, the kernel blows up. At this point,
> I've always been in X and it's too dead to dump anything into the disk logs so I don't know what
> the precise crash is, but it looks to me like the driver is not properly removing some timer
> or something there.
>
> Note that it also goes "bunk" on sleep/wakeup, and sometimes ifdown/ifup... in general, it's fragile and
> just 'loses it' in which case the only way to get it back is to rmmod/insmod.
>
> Doesn't help me to have my prism54 not working with WPA (apparently, the driver looks like it handles hostap
> ioctls but it doesn't agree on the ioctl numbers, among others, with whatever wpa_supplicant sends when
> configured to wpa mode... somebody knows if that driver is maintained ?)
prism54 fullmac, right?
Try using -Dwext; the prism54 wpa_supplicant driver is a dead-end and I
added WE-19 commands to it a bit ago anyway. Oddly enough, I couldn't
seem to get the driver to work reliably for me using straight WEP
either, let alone WPA. It's pretty unmaintained at the moment.
Dan
> So at this point I have a choice between two wireless devices that don't work (and none of them is less than
> a couple years old). Looks like the linux wireless situation isn't getting any better since last KS.
>
> Oh and I don't care about "it works in dscape stack" sort of crap I regulary get. I want something that
> works with upstream kernels. That isn't that much to ask... or is it ?
>
> Ben, back to ethernet cables.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2006-09-24 3:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-24 2:43 bcm43xx driver unstable behaviour (and linux wireless is junk btw) Benjamin Herrenschmidt
[not found] ` <1159065798.5924.8.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2006-09-24 3:45 ` Daniel Drake
[not found] ` <4515FF5D.4080602-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>
2006-09-24 6:18 ` Benjamin Herrenschmidt
[not found] ` <1159078683.5924.16.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2006-09-24 8:05 ` Michael Buesch
[not found] ` <200609241005.02024.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
2006-09-24 8:12 ` Benjamin Herrenschmidt
2006-09-24 8:43 ` Michael Buesch
2006-09-24 8:47 ` Benjamin Herrenschmidt
2006-09-24 15:34 ` Daniel Drake
2006-09-24 16:38 ` Michael Buesch
2006-09-25 9:02 ` Johannes Berg
2006-09-25 9:58 ` Benjamin Herrenschmidt
2006-09-25 10:00 ` Johannes Berg
2006-09-24 3:50 ` Dan Williams [this message]
[not found] ` <1159069857.2748.5.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2006-09-24 6:13 ` Benjamin Herrenschmidt
2006-09-24 16:02 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1159069857.2748.5.camel@localhost.localdomain \
--to=dcbw@redhat.com \
--cc=Bcm43xx-dev@lists.berlios.de \
--cc=benh@kernel.crashing.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).