From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Michael Chan" Subject: [BNX2 1/4]: Don't apply CRC PHY workaround to 5709. Date: Mon, 08 Jan 2007 15:56:21 -0800 Message-ID: <1168300581.4430.7.camel@rh4> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from mms3.broadcom.com ([216.31.210.19]:3466 "EHLO MMS3.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161149AbXAHXJb (ORCPT ); Mon, 8 Jan 2007 18:09:31 -0500 To: davem@davemloft.net, netdev@vger.kernel.org Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org [BNX2]: Don't apply CRC PHY workaround to 5709. The workaround is only needed on 5706/5708 and cannot be applied on 5709. Signed-off-by: Michael Chan diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index ada5e9b..8d682fc 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -1345,8 +1345,6 @@ bnx2_init_copper_phy(struct bnx2 *bp) { u32 val; - bp->phy_flags |= PHY_CRC_FIX_FLAG; - if (bp->phy_flags & PHY_CRC_FIX_FLAG) { bnx2_write_phy(bp, 0x18, 0x0c00); bnx2_write_phy(bp, 0x17, 0x000a); @@ -5880,7 +5878,9 @@ bnx2_init_board(struct pci_dev *pdev, st if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G) bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG; } - } + } else if (CHIP_NUM(bp) == CHIP_NUM_5706 || + CHIP_NUM(bp) == CHIP_NUM_5708) + bp->phy_flags |= PHY_CRC_FIX_FLAG; if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || (CHIP_ID(bp) == CHIP_ID_5708_B0) ||