Netdev List
 help / color / mirror / Atom feed
From: Li Yewang <lyw@nanjing-fnst.com>
To: netdev@vger.kernel.org
Subject: [patch]IPv6: fix BUG of ndisc_send_redirect()
Date: Sat, 13 Jan 2007 17:12:40 +0800	[thread overview]
Message-ID: <1168679560.3639.11.camel@localhost.localdomain> (raw)

Hi All
  When I tested IPv6 redirect function about kernel 2.6.19.1, and found
that the kernel can send redirect packets whose target address is global
address, and the target is not the actual endpoint of communication.

  But the criteria conform to RFC2461, the target address defines as
following:

  Target Address An IP address that is a better first hop to use for
                 he ICMP Destination Address.  When the target is
                 the actual endpoint of communication, i.e., the
                 destination is a neighbor, the Target Address field
                 MUST contain the same value as the ICMP Destination
                 Address field.  Otherwise the target is a better
                 first-hop router and the Target Address MUST be the
                 router's link-local address so that hosts can
                 uniquely identify routers.

According to this definition, when a router redirect to a host, the
target address either the better first-hop router's link-local address
or the same as the ICMP destination address field. But the function of
ndisc_send_redirect() in net/ipv6/ndisc.c, does not check the target
address correctly.

There is another definition about receive Redirect message in RFC2461:

8.1.  Validation of Redirect Messages

   A host MUST silently discard any received Redirect message that does
   not satisfy all of the following validity checks:
   ......
   - The ICMP Target Address is either a link-local address (when
     redirected to a router) or the same as the ICMP Destination
     Address (when redirected to the on-link destination).
   ......

And the receive redirect function of ndisc_redirect_rcv() implemented
this definition, checks the target address correctly.
    if (ipv6_addr_equal(dest, target)) {
        on_link = 1;
    } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
        ND_PRINTK2(KERN_WARNING
               "ICMPv6 Redirect: target address is not link-local.\n");
        return;
    }

So, I think the send redirect function must check the target address
also.

signed-off-by: Li Yewang <lyw@nanjing-fnst.com>

--- a/net/ipv6/ndisc.c	2007-01-13 16:59:50.050650888 +0800
+++ b/net/ipv6/ndisc.c	2007-01-13 17:02:02.362536424 +0800
@@ -1412,6 +1412,13 @@ void ndisc_send_redirect(struct sk_buff 
  		return;
  	}
 
+	if (!ipv6_addr_equal(&skb->nh.ipv6h->daddr, target) &&
+	    !(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
+		ND_PRINTK2(KERN_WARNING
+			"ICMPv6 Redirect: target address is not link-local.\n");
+		return;
+	}
+
 	ndisc_flow_init(&fl, NDISC_REDIRECT, &saddr_buf, &skb->nh.ipv6h-
>saddr,
 			dev->ifindex);
 



             reply	other threads:[~2007-01-13  9:26 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-13  9:12 Li Yewang [this message]
2007-01-14 14:13 ` [patch]IPv6: fix BUG of ndisc_send_redirect() YOSHIFUJI Hideaki / 吉藤英明
2007-01-15  1:35   ` Li Yewang
  -- strict thread matches above, loose matches on Subject: below --
2007-01-29 10:16 lyw
2007-01-30 22:33 ` [patch]IPv6:fix " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1168679560.3639.11.camel@localhost.localdomain \
    --to=lyw@nanjing-fnst.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox