From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Subject: [BNX2]: PHY workaround for 5709 A0.
Date: Thu, 01 Feb 2007 10:47:58 -0800 [thread overview]
Message-ID: <1170355679.9765.2.camel@rh4> (raw)
[BNX2]: PHY workaround for 5709 A0.
5709 A0 copper devices will not link up with some link partners
without this workaround.
Update driver to 1.5.5.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 953808e..ee7b75b 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -57,8 +57,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5.4"
-#define DRV_MODULE_RELDATE "January 24, 2007"
+#define DRV_MODULE_VERSION "1.5.5"
+#define DRV_MODULE_RELDATE "February 1, 2007"
#define RUN_AT(x) (jiffies + (x))
@@ -1356,6 +1356,14 @@ bnx2_init_copper_phy(struct bnx2 *bp)
bnx2_write_phy(bp, 0x18, 0x0400);
}
+ if (bp->phy_flags & PHY_DIS_EARLY_DAC_FLAG) {
+ bnx2_write_phy(bp, MII_BNX2_DSP_ADDRESS,
+ MII_BNX2_DSP_EXPAND_REG | 0x8);
+ bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &val);
+ val &= ~(1 << 8);
+ bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val);
+ }
+
if (bp->dev->mtu > 1500) {
/* Set extended packet length bit */
bnx2_write_phy(bp, 0x18, 0x7);
@@ -5918,6 +5926,8 @@ bnx2_init_board(struct pci_dev *pdev, st
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= PHY_CRC_FIX_FLAG;
+ else if (CHIP_ID(bp) == CHIP_ID_5709_A0)
+ bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG;
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B0) ||
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 13b6f9b..ccbdf81 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6288,6 +6288,10 @@ struct l2_fhdr {
#define BCM5708S_TX_ACTL3 0x17
+#define MII_BNX2_DSP_RW_PORT 0x15
+#define MII_BNX2_DSP_ADDRESS 0x17
+#define MII_BNX2_DSP_EXPAND_REG 0x0f00
+
#define MIN_ETHERNET_PACKET_SIZE 60
#define MAX_ETHERNET_PACKET_SIZE 1514
#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014
@@ -6489,6 +6493,7 @@ struct bnx2 {
#define PHY_INT_MODE_MASK_FLAG 0x300
#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
#define PHY_INT_MODE_LINK_READY_FLAG 0x200
+#define PHY_DIS_EARLY_DAC_FLAG 0x400
u32 chip_id;
/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
@@ -6512,6 +6517,7 @@ struct bnx2 {
#define CHIP_ID_5708_A0 0x57080000
#define CHIP_ID_5708_B0 0x57081000
#define CHIP_ID_5708_B1 0x57081010
+#define CHIP_ID_5709_A0 0x57090000
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
next reply other threads:[~2007-02-01 18:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-01 18:47 Michael Chan [this message]
2007-02-02 8:48 ` [BNX2]: PHY workaround for 5709 A0 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1170355679.9765.2.camel@rh4 \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).