From: Ramkrishna Vepa <ram.vepa@neterion.com>
To: jeff@garzik.org, santosh.rastapur@neterion.com
Cc: netdev@vger.kernel.org
Subject: [PATCH 1/2] S2IO: Remove unused variables
Date: 06 Mar 2007 16:58:55 -0800 [thread overview]
Message-ID: <1173229135.5431.37.camel@flash> (raw)
- Remove unused variables from s2io_nic structure
- Changed the memory failure printk messages to print only in debug mode
- Updated the copyright messages
(Resending; forgot to cc netdev)
Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
---
diff -Nurp patch/drivers/net/s2io.c patch1/drivers/net/s2io.c
--- patch/drivers/net/s2io.c 2007-03-06 03:28:39.000000000 -0800
+++ patch1/drivers/net/s2io.c 2007-03-06 03:29:18.000000000 -0800
@@ -1,6 +1,6 @@
/************************************************************************
* s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
- * Copyright(c) 2002-2005 Neterion Inc.
+ * Copyright(c) 2002-2007 Neterion Inc.
* This software may be used and distributed according to the terms of
* the GNU General Public License (GPL), incorporated herein by
reference.
@@ -516,7 +516,7 @@ static int init_shared_mem(struct s2io_n
mac_control->fifos[i].list_info = kmalloc(list_holder_size,
GFP_KERNEL);
if (!mac_control->fifos[i].list_info) {
- DBG_PRINT(ERR_DBG,
+ DBG_PRINT(INFO_DBG,
"Malloc failed for list_info\n");
return -ENOMEM;
}
@@ -542,9 +542,9 @@ static int init_shared_mem(struct s2io_n
tmp_v = pci_alloc_consistent(nic->pdev,
PAGE_SIZE, &tmp_p);
if (!tmp_v) {
- DBG_PRINT(ERR_DBG,
+ DBG_PRINT(INFO_DBG,
"pci_alloc_consistent ");
- DBG_PRINT(ERR_DBG, "failed for TxDL\n");
+ DBG_PRINT(INFO_DBG, "failed for TxDL\n");
return -ENOMEM;
}
/* If we got a zero DMA address(can happen on
@@ -561,9 +561,9 @@ static int init_shared_mem(struct s2io_n
tmp_v = pci_alloc_consistent(nic->pdev,
PAGE_SIZE, &tmp_p);
if (!tmp_v) {
- DBG_PRINT(ERR_DBG,
+ DBG_PRINT(INFO_DBG,
"pci_alloc_consistent ");
- DBG_PRINT(ERR_DBG, "failed for TxDL\n");
+ DBG_PRINT(INFO_DBG, "failed for TxDL\n");
return -ENOMEM;
}
}
@@ -2187,7 +2187,7 @@ static int fill_rxd_3buf(struct s2io_nic
/* skb_shinfo(skb)->frag_list will have L4 data payload */
skb_shinfo(skb)->frag_list = dev_alloc_skb(dev->mtu + ALIGN_SIZE);
if (skb_shinfo(skb)->frag_list == NULL) {
- DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n ", dev->name);
+ DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n ", dev->name);
return -ENOMEM ;
}
frag_list = skb_shinfo(skb)->frag_list;
@@ -2313,8 +2313,8 @@ static int fill_rx_buffers(struct s2io_n
/* allocate skb */
skb = dev_alloc_skb(size);
if(!skb) {
- DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
+ DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
if (first_rxdp) {
wmb();
first_rxdp->Control_1 |= RXD_OWN_XENA;
@@ -2573,8 +2573,8 @@ static int s2io_poll(struct net_device *
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(nic, i) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
break;
}
}
@@ -2590,8 +2590,8 @@ no_rx:
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(nic, i) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
break;
}
}
@@ -2640,8 +2640,8 @@ static void s2io_netpoll(struct net_devi
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(nic, i) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(ERR_DBG, " in Rx Netpoll!!\n");
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
break;
}
}
@@ -3659,7 +3659,7 @@ static int s2io_enable_msi_x(struct s2io
nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct
msix_entry),
GFP_KERNEL);
if (nic->entries == NULL) {
- DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
return -ENOMEM;
}
memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct
msix_entry));
@@ -3668,7 +3668,7 @@ static int s2io_enable_msi_x(struct s2io
kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (nic->s2io_entries == NULL) {
- DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
kfree(nic->entries);
return -ENOMEM;
}
@@ -4019,7 +4019,7 @@ static int s2io_chk_rx_buffers(struct s2
DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
DBG_PRINT(INTR_DBG, "PANIC levels\n");
if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "Out of memory in %s",
+ DBG_PRINT(INFO_DBG, "Out of memory in %s",
__FUNCTION__);
clear_bit(0, (&sp->tasklet_status));
return -1;
@@ -4029,8 +4029,8 @@ static int s2io_chk_rx_buffers(struct s2
tasklet_schedule(&sp->task);
} else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s:Out of memory", sp->dev->name);
- DBG_PRINT(ERR_DBG, " in Rx Intr!!\n");
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
return 0;
}
@@ -5949,12 +5949,12 @@ static void s2io_tasklet(unsigned long d
for (i = 0; i < config->rx_ring_num; i++) {
ret = fill_rx_buffers(sp, i);
if (ret == -ENOMEM) {
- DBG_PRINT(ERR_DBG, "%s: Out of ",
+ DBG_PRINT(INFO_DBG, "%s: Out of ",
dev->name);
DBG_PRINT(ERR_DBG, "memory in tasklet\n");
break;
} else if (ret == -EFILL) {
- DBG_PRINT(ERR_DBG,
+ DBG_PRINT(INFO_DBG,
"%s: Rx Ring %d is full\n",
dev->name, i);
break;
@@ -6065,8 +6065,8 @@ static int set_rxd_buffer_pointer(struct
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
+ DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
return -ENOMEM ;
}
/* storing the mapped addr in a temp variable
@@ -6088,7 +6088,7 @@ static int set_rxd_buffer_pointer(struct
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
+ DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n",
dev->name);
return -ENOMEM;
}
@@ -6115,7 +6115,7 @@ static int set_rxd_buffer_pointer(struct
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
+ DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n",
dev->name);
return -ENOMEM;
}
@@ -6616,7 +6616,6 @@ static int rx_osm_handler(struct ring_in
/* Updating statistics */
rxdp->Host_Control = 0;
- sp->rx_pkt_count++;
sp->stats.rx_packets++;
if (sp->rxd_mode == RXD_MODE_1) {
int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
@@ -7252,7 +7251,7 @@ s2io_init_nic(struct pci_dev *pdev, cons
goto register_failed;
}
s2io_vpd_read(sp);
- DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2005 Neterion Inc.\n");
+ DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
sp->product_name, get_xena_rev_id(sp->pdev));
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
diff -Nurp patch/drivers/net/s2io.h patch1/drivers/net/s2io.h
--- patch/drivers/net/s2io.h 2007-03-06 03:28:39.000000000 -0800
+++ patch1/drivers/net/s2io.h 2007-03-06 03:29:18.000000000 -0800
@@ -1,6 +1,6 @@
/************************************************************************
* s2io.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
- * Copyright(c) 2002-2005 Neterion Inc.
+ * Copyright(c) 2002-2007 Neterion Inc.
* This software may be used and distributed according to the terms of
* the GNU General Public License (GPL), incorporated herein by
reference.
@@ -760,7 +760,6 @@ struct s2io_nic {
#define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
struct mac_addr def_mac_addr[MAX_MAC_SUPPORTED];
- struct mac_addr pre_mac_addr[MAX_MAC_SUPPORTED];
struct net_device_stats stats;
int high_dma_flag;
@@ -794,11 +793,6 @@ struct s2io_nic {
u16 all_multi_pos;
u16 promisc_flg;
- u16 tx_pkt_count;
- u16 rx_pkt_count;
- u16 tx_err_count;
- u16 rx_err_count;
-
/* Id timer, used to blink NIC to physically identify NIC. */
struct timer_list id_timer;
diff -Nurp patch/drivers/net/s2io-regs.h patch1/drivers/net/s2io-regs.h
--- patch/drivers/net/s2io-regs.h 2007-03-06 03:28:40.000000000 -0800
+++ patch1/drivers/net/s2io-regs.h 2007-03-06 03:29:18.000000000 -0800
@@ -1,6 +1,6 @@
/************************************************************************
* regs.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
- * Copyright(c) 2002-2005 Neterion Inc.
+ * Copyright(c) 2002-2007 Neterion Inc.
* This software may be used and distributed according to the terms of
* the GNU General Public License (GPL), incorporated herein by
reference.
next reply other threads:[~2007-03-07 1:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-07 0:58 Ramkrishna Vepa [this message]
2007-03-09 17:02 ` [PATCH 1/2] S2IO: Remove unused variables Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2007-03-10 2:28 [PATCH 1/2] S2io: " Ramkrishna Vepa
2007-03-23 5:58 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1173229135.5431.37.camel@flash \
--to=ram.vepa@neterion.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
--cc=santosh.rastapur@neterion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).