From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Subject: [PATCH 17/20][BNX2]: Enhance the heartbeat.
Date: Tue, 01 May 2007 18:17:36 -0700 [thread overview]
Message-ID: <1178068656.4820.53.camel@dell> (raw)
[BNX2]: Enhance the heartbeat.
In addition to the periodic heartbeat, we're adding a heartbeat
request interrupt when the heartbeat is late. This is useful
especially in -rt kernels where the timer frequently runs late.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 34ae3e9..3d41357 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1152,6 +1152,17 @@ bnx2_set_link(struct bnx2 *bp)
return 0;
}
+static void
+bnx2_send_heart_beat(struct bnx2 *bp)
+{
+ u32 msg;
+
+ spin_lock_bh(&bp->phy_lock);
+ msg = (u32) ++bp->fw_drv_pulse_wr_seq;
+ spin_unlock_bh(&bp->phy_lock);
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg);
+}
+
static int
bnx2_reset_phy(struct bnx2 *bp)
{
@@ -1939,26 +1950,37 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index)
return 0;
}
-static void
-bnx2_phy_int(struct bnx2 *bp)
+static int
+bnx2_phy_event_is_set(struct bnx2 *bp, u32 event)
{
+ struct status_block *sblk = bp->status_blk;
u32 new_link_state, old_link_state;
+ int is_set = 1;
- new_link_state = bp->status_blk->status_attn_bits &
- STATUS_ATTN_BITS_LINK_STATE;
- old_link_state = bp->status_blk->status_attn_bits_ack &
- STATUS_ATTN_BITS_LINK_STATE;
+ new_link_state = sblk->status_attn_bits & event;
+ old_link_state = sblk->status_attn_bits_ack & event;
if (new_link_state != old_link_state) {
- if (new_link_state) {
- REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD,
- STATUS_ATTN_BITS_LINK_STATE);
- }
- else {
- REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD,
- STATUS_ATTN_BITS_LINK_STATE);
- }
+ if (new_link_state)
+ REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD, event);
+ else
+ REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD, event);
+ } else
+ is_set = 0;
+
+ return is_set;
+}
+
+static void
+bnx2_phy_int(struct bnx2 *bp)
+{
+ if (bnx2_phy_event_is_set(bp, STATUS_ATTN_BITS_LINK_STATE)) {
+ spin_lock(&bp->phy_lock);
bnx2_set_link(bp);
+ spin_unlock(&bp->phy_lock);
}
+ if (bnx2_phy_event_is_set(bp, STATUS_ATTN_BITS_TIMER_ABORT))
+ bnx2_send_heart_beat(bp);
+
}
static void
@@ -2280,6 +2302,8 @@ bnx2_interrupt(int irq, void *dev_instance)
return IRQ_HANDLED;
}
+#define STATUS_ATTN_EVENTS (STATUS_ATTN_BITS_LINK_STATE | \
+ STATUS_ATTN_BITS_TIMER_ABORT)
static inline int
bnx2_has_work(struct bnx2 *bp)
{
@@ -2289,8 +2313,8 @@ bnx2_has_work(struct bnx2 *bp)
(sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons))
return 1;
- if ((sblk->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) !=
- (sblk->status_attn_bits_ack & STATUS_ATTN_BITS_LINK_STATE))
+ if ((sblk->status_attn_bits & STATUS_ATTN_EVENTS) !=
+ (sblk->status_attn_bits_ack & STATUS_ATTN_EVENTS))
return 1;
return 0;
@@ -2300,15 +2324,14 @@ static int
bnx2_poll(struct net_device *dev, int *budget)
{
struct bnx2 *bp = netdev_priv(dev);
+ struct status_block *sblk = bp->status_blk;
+ u32 status_attn_bits = sblk->status_attn_bits;
+ u32 status_attn_bits_ack = sblk->status_attn_bits_ack;
- if ((bp->status_blk->status_attn_bits &
- STATUS_ATTN_BITS_LINK_STATE) !=
- (bp->status_blk->status_attn_bits_ack &
- STATUS_ATTN_BITS_LINK_STATE)) {
+ if ((status_attn_bits & STATUS_ATTN_EVENTS) !=
+ (status_attn_bits_ack & STATUS_ATTN_EVENTS)) {
- spin_lock(&bp->phy_lock);
bnx2_phy_int(bp);
- spin_unlock(&bp->phy_lock);
/* This is needed to take care of transient status
* during link changes.
@@ -3757,7 +3780,7 @@ bnx2_init_chip(struct bnx2 *bp)
/* Clear internal stats counters. */
REG_WR(bp, BNX2_HC_COMMAND, BNX2_HC_COMMAND_CLR_STAT_NOW);
- REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
+ REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_EVENTS);
if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) &
BNX2_PORT_FEATURE_ASF_ENABLED)
@@ -3769,7 +3792,7 @@ bnx2_init_chip(struct bnx2 *bp)
rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
0);
- REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
+ REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x7ffffff);
REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
udelay(20);
@@ -4574,7 +4597,6 @@ static void
bnx2_timer(unsigned long data)
{
struct bnx2 *bp = (struct bnx2 *) data;
- u32 msg;
if (!netif_running(bp->dev))
return;
@@ -4582,8 +4604,7 @@ bnx2_timer(unsigned long data)
if (atomic_read(&bp->intr_sem) != 0)
goto bnx2_restart_timer;
- msg = (u32) ++bp->fw_drv_pulse_wr_seq;
- REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg);
+ bnx2_send_heart_beat(bp);
bp->stats_blk->stat_FwRxDrop = REG_RD_IND(bp, BNX2_FW_RX_DROP_COUNT);
next reply other threads:[~2007-05-02 0:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 1:17 Michael Chan [this message]
2007-05-02 7:17 ` [PATCH 17/20][BNX2]: Enhance the heartbeat Jeff Garzik
2007-05-02 7:24 ` David Miller
2007-05-02 7:38 ` Jeff Garzik
2007-05-02 7:54 ` David Miller
2007-05-02 8:01 ` Jeff Garzik
2007-05-02 17:44 ` Stephen Hemminger
2007-05-02 8:40 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1178068656.4820.53.camel@dell \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).