From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Subject: [2.6.23 1/9][BNX2]: Add bnx2_set_default_link().
Date: Fri, 06 Jul 2007 20:28:45 -0700 [thread overview]
Message-ID: <1183778925.5182.18.camel@dell> (raw)
[BNX2]: Add bnx2_set_default_link().
Put existing code to setup the default link settings in this new
function. This makes it easier to support the remote PHY feature in
the next few patches.
Also change ETHTOOL_ALL_FIBRE_SPEED to include 2500Mbps if supported.
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0f4f76f..56bc41e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1323,7 +1323,9 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
}
#define ETHTOOL_ALL_FIBRE_SPEED \
- (ADVERTISED_1000baseT_Full)
+ (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ? \
+ (ADVERTISED_2500baseX_Full | ADVERTISED_1000baseT_Full) :\
+ (ADVERTISED_1000baseT_Full)
#define ETHTOOL_ALL_COPPER_SPEED \
(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
@@ -1335,6 +1337,27 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL)
+static void
+bnx2_set_default_link(struct bnx2 *bp)
+{
+ bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
+ bp->req_line_speed = 0;
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ u32 reg;
+
+ bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
+ reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
+ if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
+ bp->autoneg = 0;
+ bp->req_line_speed = bp->line_speed = SPEED_1000;
+ bp->req_duplex = DUPLEX_FULL;
+ }
+ } else
+ bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
+}
+
static int
bnx2_setup_copper_phy(struct bnx2 *bp)
{
@@ -6374,23 +6397,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
}
}
- bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
- bp->req_line_speed = 0;
- if (bp->phy_flags & PHY_SERDES_FLAG) {
- bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
-
- reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
- reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
- if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
- bp->autoneg = 0;
- bp->req_line_speed = bp->line_speed = SPEED_1000;
- bp->req_duplex = DUPLEX_FULL;
- }
- }
- else {
- bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
- }
-
+ bnx2_set_default_link(bp);
bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
init_timer(&bp->timer);
reply other threads:[~2007-07-07 2:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1183778925.5182.18.camel@dell \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox