From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Herrenschmidt Subject: Re: MSI interrupts and disable_irq Date: Mon, 15 Oct 2007 07:47:53 +1000 Message-ID: <1192398473.6188.10.camel@pasglop> References: <46FC15A9.1070803@nvidia.com> <46FDBCB4.9090802@pobox.com> <4710901F.8010206@colorfullife.com> <86802c440710132259o6e82f6s4bed7b25bd5636e9@mail.gmail.com> <4711C217.2010605@colorfullife.com> Reply-To: benh@kernel.crashing.org Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Cc: Yinghai Lu , Jeff Garzik , Ayaz Abdulla , nedev , Linux Kernel Mailing List , David Miller , Andrew Morton To: Manfred Spraul Return-path: Received: from gate.crashing.org ([63.228.1.57]:41355 "EHLO gate.crashing.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754134AbXJNVsO (ORCPT ); Sun, 14 Oct 2007 17:48:14 -0400 In-Reply-To: <4711C217.2010605@colorfullife.com> Sender: netdev-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On Sun, 2007-10-14 at 09:15 +0200, Manfred Spraul wrote: > Yinghai Lu wrote: > > On 10/13/07, Manfred Spraul wrote: > > > >> Someone around with a MSI capable board? The forcedeth driver does > >> dev->irq = pci_dev->irq > >> in nv_probe(), especially before pci_enable_msi(). > >> Does pci_enable_msi() change pci_dev->irq? Then we would disable the > >> wrong interrupt.... > >> > > > > the request_irq==>setup_irq will make dev->irq = pci_dev->irq. > > > > > Where is that? > Otherwise I would propose the attached patch. My board is not > MSI-capable, thus I can't test it myself. Why not just copy pcidev->irq to dev->irq once ? Ben.