From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Zhang, Yanmin" Subject: Re: Netperf TCP_RR(loopback) 10% regression in 2.6.24-rc6, comparing with 2.6.22 Date: Wed, 23 Jan 2008 08:42:24 +0800 Message-ID: <1201048944.3151.263.camel@ymzhang> References: <1199871330.3298.132.camel@ymzhang> <1200043854.3265.24.camel@ymzhang> <4787ADDA.7090602@hp.com> <1200280292.3151.24.camel@ymzhang> <478B9FE0.3040801@hp.com> <1200979482.3151.103.camel@ymzhang> <1200982039.3151.120.camel@ymzhang> <479637B1.5000706@hp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, David Miller To: Rick Jones Return-path: Received: from mga10.intel.com ([192.55.52.92]:56782 "EHLO fmsmga102.fm.intel.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752392AbYAWAoA (ORCPT ); Tue, 22 Jan 2008 19:44:00 -0500 In-Reply-To: <479637B1.5000706@hp.com> Sender: netdev-owner@vger.kernel.org List-ID: On Tue, 2008-01-22 at 10:36 -0800, Rick Jones wrote: > When parsing the -P option in scan_socket_args() of src/nettest_bsd.c, > netperf is using "break_args()" from src/netsh.c which indeed if the > command line says "-P 12345" will set both the local and remote port > numbers to 12345. If instead you were to say "-P 12345," it will use > 12345 only for the netperf side. If you say "-P ,12345" it will use > 12345 only for the netserver side. To set both sides at once to > different values it would be "-P 12345,54321" > > In theory, send_udp_rr() in src/nettest_bsd.c (or I suppose > scan_socket_args() could have more code added to it to check for a UDP > test over loopback, but probably needs to be a check for any local IP, > and unless this becomes something bigger than "Doctor! Doctor! It hurts > when I do this!" :) I'm inclined to leave it as caveat benchmarker and > perhaps some additional text in the manual. I will instrument kernel to see if kernel does work like it is expected. When an issue is found, we shouldn't escape by saying it's nothing to do with me. -yanmin