From: Jay Cliburn <jacliburn@bellsouth.net>
To: jeff@garzik.org
Cc: csnook@redhat.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jay Cliburn <jacliburn@bellsouth.net>
Subject: [PATCH 04/10] atl1: add ethtool register dump
Date: Sat, 2 Feb 2008 19:50:06 -0600 [thread overview]
Message-ID: <1202003412-4028-4-git-send-email-jacliburn@bellsouth.net> (raw)
In-Reply-To: <1202003412-4028-1-git-send-email-jacliburn@bellsouth.net>
Add the ethtool register dump option to the atl1 driver.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Acked-by: Chris Snook <csnook@redhat.com>
---
drivers/net/atlx/atl1.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/atlx/atl1.h | 1 +
2 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 8a26dad..1f564f0 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2513,6 +2513,57 @@ static int atl1_set_wol(struct net_device *netdev,
return 0;
}
+static int atl1_get_regs_len(struct net_device *netdev)
+{
+ return ATL1_REG_COUNT * sizeof(u32);
+}
+
+static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+ struct atl1_hw *hw = &adapter->hw;
+ unsigned int i;
+ u32 *regbuf = p;
+
+ for (i = 0; i < ATL1_REG_COUNT; i++) {
+ /*
+ * This switch statement avoids reserved regions
+ * of register space.
+ */
+ switch (i) {
+ case 6 ... 9:
+ case 14:
+ case 29 ... 31:
+ case 34 ... 63:
+ case 75 ... 127:
+ case 136 ... 1023:
+ case 1027 ... 1087:
+ case 1091 ... 1151:
+ case 1194 ... 1195:
+ case 1200 ... 1201:
+ case 1206 ... 1213:
+ case 1216 ... 1279:
+ case 1290 ... 1311:
+ case 1323 ... 1343:
+ case 1358 ... 1359:
+ case 1368 ... 1375:
+ case 1378 ... 1383:
+ case 1388 ... 1391:
+ case 1393 ... 1395:
+ case 1402 ... 1403:
+ case 1410 ... 1471:
+ case 1522 ... 1535:
+ /* reserved region; don't read it */
+ regbuf[i] = 0;
+ break;
+ default:
+ /* unreserved region */
+ regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
+ }
+ }
+}
+
static void atl1_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
@@ -2703,6 +2754,8 @@ const struct ethtool_ops atl1_ethtool_ops = {
.get_drvinfo = atl1_get_drvinfo,
.get_wol = atl1_get_wol,
.set_wol = atl1_set_wol,
+ .get_regs_len = atl1_get_regs_len,
+ .get_regs = atl1_get_regs,
.get_ringparam = atl1_get_ringparam,
.set_ringparam = atl1_set_ringparam,
.get_pauseparam = atl1_get_pauseparam,
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h
index 538948d..30c5a8d 100644
--- a/drivers/net/atlx/atl1.h
+++ b/drivers/net/atlx/atl1.h
@@ -584,6 +584,7 @@ enum atl1_dma_req_block {
#define ATL1_DEFAULT_RFD 512
#define ATL1_MIN_RFD 128
#define ATL1_MAX_RFD 2048
+#define ATL1_REG_COUNT 1538
#define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i]))
#define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc)
--
1.5.3.8
next prev parent reply other threads:[~2008-02-03 1:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-03 1:50 [PATCH 01/10] atl1: relocate atl1 driver to /drivers/net/atlx Jay Cliburn
2008-02-03 1:50 ` [PATCH 02/10] atl1: move common functions to atlx files Jay Cliburn
2008-02-03 1:50 ` [PATCH 03/10] atl1: fix broken TSO Jay Cliburn
2008-02-03 1:50 ` Jay Cliburn [this message]
2008-02-03 1:50 ` [PATCH 05/10] atl1: simplify tx packet descriptor Jay Cliburn
2008-02-03 1:50 ` [PATCH 06/10] atl1: use csum_start Jay Cliburn
2008-02-03 1:50 ` [PATCH 07/10] atl1: use netif_msg Jay Cliburn
2008-02-03 1:50 ` [PATCH 08/10] atl1: print debug info if rrd error Jay Cliburn
2008-02-03 1:50 ` [PATCH 09/10] atl1: make functions static Jay Cliburn
2008-02-03 1:50 ` [PATCH 10/10] atl1: reduce forward declarations Jay Cliburn
2008-02-11 15:57 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1202003412-4028-4-git-send-email-jacliburn@bellsouth.net \
--to=jacliburn@bellsouth.net \
--cc=csnook@redhat.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).