From: Allan Stephens <allan.stephens@windriver.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, allan.stephens@windriver.com
Subject: [PATCH 5/5 net-next-2.6] [TIPC]: Fix initialization sequence problems when entering network mode
Date: Tue, 20 May 2008 17:08:32 -0400 [thread overview]
Message-ID: <1211317712-13596-6-git-send-email-allan.stephens@windriver.com> (raw)
In-Reply-To: <1211317712-13596-1-git-send-email-allan.stephens@windriver.com>
This patch ensures that TIPC's topology service and configuration
service are shut down before switching into "network mode". This
ensures that TIPC does not mistakenly try to send unnecessary
"publication withdraw" messages to other nodes before it is fully
initialized for sending off-node messages. Note that the node's
current network address is now updated only after the two services
are shut down; this ensures that any existing connections to the
topology server are terminated correctly using the old address.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
---
net/tipc/config.c | 3 +--
net/tipc/core.c | 4 ++--
net/tipc/core.h | 2 +-
net/tipc/net.c | 10 +++++++---
net/tipc/net.h | 2 +-
5 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/net/tipc/config.c b/net/tipc/config.c
index 16e7cb7..ca3544d 100644
--- a/net/tipc/config.c
+++ b/net/tipc/config.c
@@ -293,7 +293,6 @@ static struct sk_buff *cfg_set_own_addr(void)
if (tipc_mode == TIPC_NET_MODE)
return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
" (cannot change node address once assigned)");
- tipc_own_addr = addr;
/*
* Must release all spinlocks before calling start_net() because
@@ -306,7 +305,7 @@ static struct sk_buff *cfg_set_own_addr(void)
*/
spin_unlock_bh(&config_lock);
- tipc_core_start_net();
+ tipc_core_start_net(addr);
spin_lock_bh(&config_lock);
return tipc_cfg_reply_none();
}
diff --git a/net/tipc/core.c b/net/tipc/core.c
index 3d97386..3256bd7 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -117,11 +117,11 @@ void tipc_core_stop_net(void)
* start_net - start TIPC networking sub-systems
*/
-int tipc_core_start_net(void)
+int tipc_core_start_net(unsigned long addr)
{
int res;
- if ((res = tipc_net_start()) ||
+ if ((res = tipc_net_start(addr)) ||
(res = tipc_eth_media_start())) {
tipc_core_stop_net();
}
diff --git a/net/tipc/core.h b/net/tipc/core.h
index bd78d17..a881f92 100644
--- a/net/tipc/core.h
+++ b/net/tipc/core.h
@@ -202,7 +202,7 @@ extern atomic_t tipc_user_count;
extern int tipc_core_start(void);
extern void tipc_core_stop(void);
-extern int tipc_core_start_net(void);
+extern int tipc_core_start_net(unsigned long addr);
extern void tipc_core_stop_net(void);
extern int tipc_handler_start(void);
extern void tipc_handler_stop(void);
diff --git a/net/tipc/net.c b/net/tipc/net.c
index c39c762..cc51fa4 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -266,7 +266,7 @@ void tipc_net_route_msg(struct sk_buff *buf)
tipc_link_send(buf, dnode, msg_link_selector(msg));
}
-int tipc_net_start(void)
+int tipc_net_start(u32 addr)
{
char addr_string[16];
int res;
@@ -274,6 +274,10 @@ int tipc_net_start(void)
if (tipc_mode != TIPC_NODE_MODE)
return -ENOPROTOOPT;
+ tipc_subscr_stop();
+ tipc_cfg_stop();
+
+ tipc_own_addr = addr;
tipc_mode = TIPC_NET_MODE;
tipc_named_reinit();
tipc_port_reinit();
@@ -284,10 +288,10 @@ int tipc_net_start(void)
(res = tipc_bclink_init())) {
return res;
}
- tipc_subscr_stop();
- tipc_cfg_stop();
+
tipc_k_signal((Handler)tipc_subscr_start, 0);
tipc_k_signal((Handler)tipc_cfg_init, 0);
+
info("Started in network mode\n");
info("Own node address %s, network identity %u\n",
addr_string_fill(addr_string, tipc_own_addr), tipc_net_id);
diff --git a/net/tipc/net.h b/net/tipc/net.h
index a6a0e99..d154ac2 100644
--- a/net/tipc/net.h
+++ b/net/tipc/net.h
@@ -58,7 +58,7 @@ void tipc_net_route_msg(struct sk_buff *buf);
struct node *tipc_net_select_remote_node(u32 addr, u32 ref);
u32 tipc_net_select_router(u32 addr, u32 ref);
-int tipc_net_start(void);
+int tipc_net_start(u32 addr);
void tipc_net_stop(void);
#endif
--
1.5.3.2
next prev parent reply other threads:[~2008-05-20 21:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-20 21:08 [PATCH 0/5 net-next-2.6] [TIPC]: Fixes to several obscure problems Allan Stephens
2008-05-20 21:08 ` [PATCH 1/5 net-next-2.6] [TIPC]: Fix skb_under_panic when configuring TIPC without privileges Allan Stephens
2008-05-20 21:08 ` [PATCH 2/5 net-next-2.6] [TIPC]: Prevent node object duplication due to simultaneous discovery Allan Stephens
2008-05-20 21:08 ` [PATCH 3/5 net-next-2.6] [TIPC]: Optimize null pointer check during neighbor discovery Allan Stephens
2008-05-20 21:08 ` [PATCH 4/5 net-next-2.6] [TIPC]: Update "previous node" indicators when node address changes Allan Stephens
2008-05-20 21:08 ` Allan Stephens [this message]
2008-05-21 21:55 ` [PATCH 0/5 net-next-2.6] [TIPC]: Fixes to several obscure problems David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1211317712-13596-6-git-send-email-allan.stephens@windriver.com \
--to=allan.stephens@windriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).