From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kasper Sandberg Subject: Re: 8169 Intermittent ifup Failure Issue With RTL8102E Chipset in Intel's New D945GCLF Atom Board (Not the Initial Modprobe Crash, Another Problem) Date: Mon, 14 Jul 2008 18:21:00 +0200 Message-ID: <1216052460.23392.14.camel@localhost> References: <4861800B.90703@nscus.com> <20080625213142.GA29890@electric-eye.fr.zoreil.com> <48640535.2050000@nscus.com> <20080626215918.GC2555@electric-eye.fr.zoreil.com> <1215435236.11909.121.camel@localhost> <487232F4.6000206@dell.com> <1215783324.11909.185.camel@localhost> <48777BC3.6090108@dell.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Cc: Francois Romieu , Michael Grollman , netdev@vger.kernel.org, akpm@linux-foundation.org, linux-pci@vger.kernel.org To: Mario Limonciello Return-path: In-Reply-To: <48777BC3.6090108@dell.com> Sender: linux-pci-owner@vger.kernel.org List-Id: netdev.vger.kernel.org On Fri, 2008-07-11 at 10:26 -0500, Mario Limonciello wrote: > Kasper: > > http://marc.info/?l=linux-netdev&m=121498012600793&w=2 I just tested it. It fails. after a few unloads/loads the lspci -x output is garbled again. the funny thing is (i have a dual nic board) its random which one that breaks.. Francois, i tested your patch, http://userweb.kernel.org/~romieu/r8169/2.6.26-rc9/20080710-r8169-test.patch against .26 and it WORKS. with all the other tests i've done, ~5 unloads/loads is more than enough to trigger it, i just did 50 on your patch, and it functions. Now i can have both msi and apic on.. Thanks alot. Do you have plans to get this merged? > > Regards > > Kasper Sandberg wrote: > > On Mon, 2008-07-07 at 10:15 -0500, Mario Limonciello wrote: > > > > Sorry, i am not subscribed to netdev or pci list, could you post here > > aswell? > > > > > > > > >