From: Dan Williams <dcbw-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Wang Chen <wangchen-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
Cc: "David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
Jeff Garzik <jgarzik-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org>,
NETDEV <netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 15/18] netdevice libertas: Fix directly reference of netdev->priv
Date: Fri, 05 Sep 2008 13:07:45 -0400 [thread overview]
Message-ID: <1220634465.6430.16.camel@localhost.localdomain> (raw)
In-Reply-To: <48C0A76F.8090706-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
On Fri, 2008-09-05 at 11:28 +0800, Wang Chen wrote:
> We have some reasons to kill netdev->priv:
> 1. netdev->priv is equal to netdev_priv().
> 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously
> netdev_priv() is more flexible than netdev->priv.
> But we cann't kill netdev->priv, because so many drivers reference to it
> directly.
>
> OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug",
> and I want to kill netdev->priv later, I decided to convert all the direct
> reference of netdev->priv first.
>
> Different to readonly reference of netdev->priv, in this driver, netdev->priv
> was changed. I use netdev->ml_priv to replace netdev->priv.
Same comment as the other two; any reason we can't use netdev_priv()
instead of ->ml_priv? That would be preferable.
Thanks!
Dan
> Signed-off-by: Wang Chen <wangchen-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
> ---
> drivers/net/wireless/libertas/main.c | 36 +++++++++++++++++-----------------
> 1 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index bd32ac0..71c4bd8 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -223,7 +223,7 @@ u8 lbs_data_rate_to_fw_index(u32 rate)
> static ssize_t lbs_anycast_get(struct device *dev,
> struct device_attribute *attr, char * buf)
> {
> - struct lbs_private *priv = to_net_dev(dev)->priv;
> + struct lbs_private *priv = netdev_priv(to_net_dev(dev));
> struct cmd_ds_mesh_access mesh_access;
> int ret;
>
> @@ -242,7 +242,7 @@ static ssize_t lbs_anycast_get(struct device *dev,
> static ssize_t lbs_anycast_set(struct device *dev,
> struct device_attribute *attr, const char * buf, size_t count)
> {
> - struct lbs_private *priv = to_net_dev(dev)->priv;
> + struct lbs_private *priv = netdev_priv(to_net_dev(dev));
> struct cmd_ds_mesh_access mesh_access;
> uint32_t datum;
> int ret;
> @@ -270,7 +270,7 @@ static void lbs_remove_mesh(struct lbs_private *priv);
> static ssize_t lbs_rtap_get(struct device *dev,
> struct device_attribute *attr, char * buf)
> {
> - struct lbs_private *priv = to_net_dev(dev)->priv;
> + struct lbs_private *priv = netdev_priv(to_net_dev(dev));
> return snprintf(buf, 5, "0x%X\n", priv->monitormode);
> }
>
> @@ -281,7 +281,7 @@ static ssize_t lbs_rtap_set(struct device *dev,
> struct device_attribute *attr, const char * buf, size_t count)
> {
> int monitor_mode;
> - struct lbs_private *priv = to_net_dev(dev)->priv;
> + struct lbs_private *priv = netdev_priv(to_net_dev(dev));
>
> sscanf(buf, "%x", &monitor_mode);
> if (monitor_mode) {
> @@ -330,7 +330,7 @@ static DEVICE_ATTR(lbs_rtap, 0644, lbs_rtap_get, lbs_rtap_set );
> static ssize_t lbs_mesh_get(struct device *dev,
> struct device_attribute *attr, char * buf)
> {
> - struct lbs_private *priv = to_net_dev(dev)->priv;
> + struct lbs_private *priv = netdev_priv(to_net_dev(dev));
> return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
> }
>
> @@ -340,7 +340,7 @@ static ssize_t lbs_mesh_get(struct device *dev,
> static ssize_t lbs_mesh_set(struct device *dev,
> struct device_attribute *attr, const char * buf, size_t count)
> {
> - struct lbs_private *priv = to_net_dev(dev)->priv;
> + struct lbs_private *priv = netdev_priv(to_net_dev(dev));
> int enable;
> int ret, action = CMD_ACT_MESH_CONFIG_STOP;
>
> @@ -391,7 +391,7 @@ static struct attribute_group lbs_mesh_attr_group = {
> */
> static int lbs_dev_open(struct net_device *dev)
> {
> - struct lbs_private *priv = (struct lbs_private *) dev->priv ;
> + struct lbs_private *priv = netdev_priv(dev) ;
> int ret = 0;
>
> lbs_deb_enter(LBS_DEB_NET);
> @@ -433,7 +433,7 @@ static int lbs_dev_open(struct net_device *dev)
> */
> static int lbs_mesh_stop(struct net_device *dev)
> {
> - struct lbs_private *priv = (struct lbs_private *) (dev->priv);
> + struct lbs_private *priv = dev->ml_priv;
>
> lbs_deb_enter(LBS_DEB_MESH);
> spin_lock_irq(&priv->driver_lock);
> @@ -460,7 +460,7 @@ static int lbs_mesh_stop(struct net_device *dev)
> */
> static int lbs_eth_stop(struct net_device *dev)
> {
> - struct lbs_private *priv = (struct lbs_private *) dev->priv;
> + struct lbs_private *priv = netdev_priv(dev);
>
> lbs_deb_enter(LBS_DEB_NET);
>
> @@ -477,7 +477,7 @@ static int lbs_eth_stop(struct net_device *dev)
>
> static void lbs_tx_timeout(struct net_device *dev)
> {
> - struct lbs_private *priv = (struct lbs_private *) dev->priv;
> + struct lbs_private *priv = netdev_priv(dev);
>
> lbs_deb_enter(LBS_DEB_TX);
>
> @@ -529,7 +529,7 @@ EXPORT_SYMBOL_GPL(lbs_host_to_card_done);
> */
> static struct net_device_stats *lbs_get_stats(struct net_device *dev)
> {
> - struct lbs_private *priv = (struct lbs_private *) dev->priv;
> + struct lbs_private *priv = netdev_priv(dev);
>
> lbs_deb_enter(LBS_DEB_NET);
> return &priv->stats;
> @@ -538,7 +538,7 @@ static struct net_device_stats *lbs_get_stats(struct net_device *dev)
> static int lbs_set_mac_address(struct net_device *dev, void *addr)
> {
> int ret = 0;
> - struct lbs_private *priv = (struct lbs_private *) dev->priv;
> + struct lbs_private *priv = netdev_priv(dev);
> struct sockaddr *phwaddr = addr;
> struct cmd_ds_802_11_mac_address cmd;
>
> @@ -672,7 +672,7 @@ static void lbs_set_mcast_worker(struct work_struct *work)
>
> static void lbs_set_multicast_list(struct net_device *dev)
> {
> - struct lbs_private *priv = dev->priv;
> + struct lbs_private *priv = netdev_priv(dev);
>
> schedule_work(&priv->mcast_work);
> }
> @@ -688,7 +688,7 @@ static void lbs_set_multicast_list(struct net_device *dev)
> static int lbs_thread(void *data)
> {
> struct net_device *dev = data;
> - struct lbs_private *priv = dev->priv;
> + struct lbs_private *priv = netdev_priv(dev);
> wait_queue_t wait;
>
> lbs_deb_enter(LBS_DEB_THREAD);
> @@ -1116,7 +1116,7 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
> lbs_pr_err("init ethX device failed\n");
> goto done;
> }
> - priv = dev->priv;
> + priv = netdev_priv(dev);
>
> if (lbs_init_adapter(priv)) {
> lbs_pr_err("failed to initialize adapter structure.\n");
> @@ -1351,7 +1351,7 @@ static int lbs_add_mesh(struct lbs_private *priv)
> ret = -ENOMEM;
> goto done;
> }
> - mesh_dev->priv = priv;
> + mesh_dev->ml_priv = priv;
> priv->mesh_dev = mesh_dev;
>
> mesh_dev->open = lbs_dev_open;
> @@ -1564,7 +1564,7 @@ static int lbs_rtap_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
>
> static struct net_device_stats *lbs_rtap_get_stats(struct net_device *dev)
> {
> - struct lbs_private *priv = dev->priv;
> + struct lbs_private *priv = dev->ml_priv;
> lbs_deb_enter(LBS_DEB_NET);
> return &priv->stats;
> }
> @@ -1605,7 +1605,7 @@ static int lbs_add_rtap(struct lbs_private *priv)
> rtap_dev->stop = lbs_rtap_stop;
> rtap_dev->get_stats = lbs_rtap_get_stats;
> rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
> - rtap_dev->priv = priv;
> + rtap_dev->ml_priv = priv;
> SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
>
> ret = register_netdev(rtap_dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-09-05 17:07 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-05 3:06 [V#2 PATCH 0/18] netdevice: Fix directly reference of netdev->priv Wang Chen
2008-09-05 3:09 ` [PATCH 01/18] netdevice: safe convert to netdev_priv() #part-1 Wang Chen
2008-09-05 3:10 ` [PATCH 02/18] netdevice: safe convert to netdev_priv() #part-2 Wang Chen
2008-09-05 3:11 ` [PATCH 03/18] netdevice: safe convert to netdev_priv() #part-3 Wang Chen
2008-09-05 13:58 ` David Dillow
2008-09-05 3:11 ` [PATCH 04/18] netdevice: safe convert to netdev_priv() #part-4 Wang Chen
2008-09-05 3:14 ` [PATCH 05/18] netdevice 82596: Convert directly reference of netdev->priv to netdev->ml_priv Wang Chen
2008-09-05 3:15 ` [PATCH 06/18] netdevice chelsio: " Wang Chen
2008-09-05 3:17 ` [PATCH 07/18] netdevice hamradio: " Wang Chen
2008-09-05 3:19 ` [PATCH 08/18] netdevice lance: " Wang Chen
2008-09-05 3:20 ` [PATCH 09/18] netdevice ni65: " Wang Chen
2008-09-05 3:21 ` [PATCH 10/18] netdevice ppp: " Wang Chen
2008-09-05 3:23 ` [PATCH 11/18] netdevice cycx_x25: " Wang Chen
2008-09-05 3:24 ` [PATCH 12/18] netdevice hdlc: " Wang Chen
2008-09-05 16:38 ` Krzysztof Halasa
2008-09-05 3:25 ` [PATCH 13/18] netdevice wanrouter: " Wang Chen
2008-09-05 3:27 ` [PATCH 14/18] netdevice airo: " Wang Chen
2008-09-05 12:50 ` John W. Linville
[not found] ` <20080905125036.GA3027-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2008-09-05 17:06 ` Dan Williams
[not found] ` <1220634383.6430.14.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-09-06 9:37 ` Wang Chen
[not found] ` <48C24F66.1090803-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2008-09-26 8:37 ` Wang Chen
[not found] ` <48C0A219.2030004-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2008-09-05 3:28 ` [PATCH 15/18] netdevice libertas: Fix directly reference of netdev->priv Wang Chen
[not found] ` <48C0A76F.8090706-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2008-09-05 17:07 ` Dan Williams [this message]
[not found] ` <1220634465.6430.16.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2008-10-31 19:17 ` John W. Linville
2008-09-05 3:29 ` [PATCH 16/18] netdevice zd1201: Convert directly reference of netdev->priv to netdev->ml_priv Wang Chen
2008-09-05 12:56 ` John W. Linville
[not found] ` <48C0A7A0.9030200-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2008-10-31 18:22 ` John W. Linville
[not found] ` <20081031182207.GD4310-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2008-10-31 18:48 ` [PATCH] netdevice zd1201: Convert directly reference of netdev->priv to netdev_priv() John W. Linville
[not found] ` <1225478896-28987-1-git-send-email-linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2008-10-31 19:00 ` Stephen Hemminger
2008-11-03 2:06 ` Wang Chen
2008-12-18 6:53 ` [PATCH -next] netdevice zd1201: Use after free Wang Chen
2008-12-18 13:58 ` John W. Linville
[not found] ` <4949F36B.7080707-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
2008-12-19 3:37 ` David Miller
2008-09-05 3:30 ` [PATCH 17/18] netdevice pc300: Convert directly reference of netdev->priv to netdev->ml_priv Wang Chen
2008-09-09 13:23 ` Krzysztof Halasa
2008-09-05 3:31 ` [PATCH 18/18] netdevice sbni: Convert directly reference of netdev->priv to netdev_priv() Wang Chen
2008-09-05 3:42 ` [V#2 PATCH 0/18] netdevice: Fix directly reference of netdev->priv Wang Chen
2008-09-20 8:17 ` Wang Chen
2008-09-20 10:37 ` David Miller
2008-09-22 7:04 ` Wang Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1220634465.6430.16.camel@localhost.localdomain \
--to=dcbw-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=jgarzik-e+AXbWqSrlAAvxtiuMwx3w@public.gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wangchen-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).