Re: [PATCH 1/2] Add SMC_MEM_RESERVED for OMAP platform.

["stanley.miao" <stanley.miao@windriver.com>]

On Mon, 2008-11-17 at 10:31 +0000, Steve.Glendinning@smsc.com wrote:
> Hi Stanley,
> 
> Jeff has merged the smsc911x driver into -next, this is intended to 
> replace smc911x moving forward.  I'll forward the patchset to you 
> off-list, it includes platform_data support for several platforms so 
> adding support for omap should be simple.

OK, Thanks.

Stanley.

> 
> > diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
> > index cc7d85b..d1b3b9b 100644
> > --- a/drivers/net/smc911x.h
> > +++ b/drivers/net/smc911x.h
> > @@ -42,6 +42,16 @@
> >    #define SMC_USE_16BIT      0
> >    #define SMC_USE_32BIT      1
> >    #define SMC_IRQ_SENSE      IRQF_TRIGGER_LOW
> > +#elif defined(CONFIG_ARCH_OMAP34XX)
> > +  #define SMC_USE_16BIT      0
> > +  #define SMC_USE_32BIT      1
> > +  #define SMC_IRQ_SENSE      IRQF_TRIGGER_LOW
> > +  #define SMC_MEM_RESERVED   1
> > +#elif defined(CONFIG_ARCH_OMAP24XX)
> > +  #define SMC_USE_16BIT      0
> > +  #define SMC_USE_32BIT      1
> > +  #define SMC_IRQ_SENSE      IRQF_TRIGGER_LOW
> > +  #define SMC_MEM_RESERVED   1
> >  #else
> >  /*
> >   * Default configuration
> 
> nack - this platform-specific configuration shouldn't be in the driver, 
> SMC_DYNAMIC_BUS_CONFIG was added so this can be specified in 
> platform_data.
> 
> Regards,
> --
> Steve Glendinning
> SMSC GmbH
> m: +44 777 933 9124
> e: steve.glendinning@smsc.com
>