From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, "Michael Chan" <mchan@broadcom.com>,
andy@greyhouse.net
Subject: [PATCH 3/5] tg3: Remove unused cfgspc device members
Date: Wed, 17 Dec 2008 18:23:13 -0800 [thread overview]
Message-ID: <1229717360.5502@xw6200> (raw)
This patch removes the pci_bist and pci_hdr_type members from the
device structure and removes the code that references them. They are
not really used.
The patch rounds out the changes by moving the pci_cmd member to plug
a structure hole that would have been created. On 32-bit systems, this
movement removes a subsequent structure hole later in the structure. On
64-bit systems though, the movement merely consolidates two holes into
one larger hole.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 23 ++++++-----------------
drivers/net/tg3.h | 4 +---
2 files changed, 7 insertions(+), 20 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9af8c9b..218c11a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12160,7 +12160,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
{ },
};
u32 misc_ctrl_reg;
- u32 cacheline_sz_reg;
u32 pci_state_reg, grc_misc_cfg;
u32 val;
u16 pci_cmd;
@@ -12330,14 +12329,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
tp->misc_host_ctrl);
- pci_read_config_dword(tp->pdev, TG3PCI_CACHELINESZ,
- &cacheline_sz_reg);
-
- tp->pci_cacheline_sz = (cacheline_sz_reg >> 0) & 0xff;
- tp->pci_lat_timer = (cacheline_sz_reg >> 8) & 0xff;
- tp->pci_hdr_type = (cacheline_sz_reg >> 16) & 0xff;
- tp->pci_bist = (cacheline_sz_reg >> 24) & 0xff;
-
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
tp->pdev_peer = tg3_find_peer(tp);
@@ -12447,17 +12438,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
+ pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
+ &tp->pci_cacheline_sz);
+ pci_read_config_byte(tp->pdev, PCI_LATENCY_TIMER,
+ &tp->pci_lat_timer);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
tp->pci_lat_timer < 64) {
tp->pci_lat_timer = 64;
-
- cacheline_sz_reg = ((tp->pci_cacheline_sz & 0xff) << 0);
- cacheline_sz_reg |= ((tp->pci_lat_timer & 0xff) << 8);
- cacheline_sz_reg |= ((tp->pci_hdr_type & 0xff) << 16);
- cacheline_sz_reg |= ((tp->pci_bist & 0xff) << 24);
-
- pci_write_config_dword(tp->pdev, TG3PCI_CACHELINESZ,
- cacheline_sz_reg);
+ pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
+ tp->pci_lat_timer);
}
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX) {
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index f3cda64..814d82b 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2676,10 +2676,9 @@ struct tg3 {
/* PCI block */
u32 pci_chip_rev_id;
+ u16 pci_cmd;
u8 pci_cacheline_sz;
u8 pci_lat_timer;
- u8 pci_hdr_type;
- u8 pci_bist;
int pm_cap;
int msi_cap;
@@ -2730,7 +2729,6 @@ struct tg3 {
u32 led_ctrl;
u32 phy_otp;
- u16 pci_cmd;
char board_part_number[24];
#define TG3_VER_SIZE 32
--
1.5.6.4
next reply other threads:[~2008-12-19 20:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-18 2:23 Matt Carlson [this message]
2008-12-22 4:22 ` [PATCH 3/5] tg3: Remove unused cfgspc device members David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1229717360.5502@xw6200 \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).