netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: Roel Kluin <roel.kluin@gmail.com>,
	netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 02/20] sfc: Fix test for MDIO read failure
Date: Thu, 29 Jan 2009 19:16:43 +0000	[thread overview]
Message-ID: <1233256603.3656.15.camel@achroite> (raw)
In-Reply-To: <1233256358.3656.9.camel@achroite>

Commit 27dd2caca4eabe7c13a052b7456495ba75535e6a changed
mdio_clause45_check_mmds() to read both DEVS0 and DEVS1 registers and
to combine their values into an unsigned 32-bit mask.  This made the
following test for a negative (failure) value useless.  Fix it to
check whether either read failed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 drivers/net/sfc/mdio_10g.c |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index f6a1642..4d54010 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -124,24 +124,25 @@ int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
 int mdio_clause45_check_mmds(struct efx_nic *efx,
 			     unsigned int mmd_mask, unsigned int fatal_mask)
 {
+	int mmd = 0, probe_mmd, devs0, devs1;
 	u32 devices;
-	int mmd = 0, probe_mmd;
 
 	/* Historically we have probed the PHYXS to find out what devices are
 	 * present,but that doesn't work so well if the PHYXS isn't expected
 	 * to exist, if so just find the first item in the list supplied. */
 	probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS_PHYXS) ? MDIO_MMD_PHYXS :
 	    __ffs(mmd_mask);
-	devices = (mdio_clause45_read(efx, efx->mii.phy_id,
-				      probe_mmd, MDIO_MMDREG_DEVS0) |
-		   mdio_clause45_read(efx, efx->mii.phy_id,
-				      probe_mmd, MDIO_MMDREG_DEVS1) << 16);
 
 	/* Check all the expected MMDs are present */
-	if (devices < 0) {
+	devs0 = mdio_clause45_read(efx, efx->mii.phy_id,
+				   probe_mmd, MDIO_MMDREG_DEVS0);
+	devs1 = mdio_clause45_read(efx, efx->mii.phy_id,
+				   probe_mmd, MDIO_MMDREG_DEVS1);
+	if (devs0 < 0 || devs1 < 0) {
 		EFX_ERR(efx, "failed to read devices present\n");
 		return -EIO;
 	}
+	devices = devs0 | (devs1 << 16);
 	if ((devices & mmd_mask) != mmd_mask) {
 		EFX_ERR(efx, "required MMDs not present: got %x, "
 			"wanted %x\n", devices, mmd_mask);

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.


  parent reply	other threads:[~2009-01-29 19:16 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-29 19:12 [PATCH 00/20] sfc: Fixes and new PHY support for 2.6.29 Ben Hutchings
2009-01-29 19:15 ` [PATCH 01/20] sfc: SFT9001: Include non-breaking cable diagnostics in online self-tests Ben Hutchings
2009-01-29 19:16 ` Ben Hutchings [this message]
2009-01-29 19:17 ` [PATCH 03/20] sfc: SFT9001: Enable robust link training Ben Hutchings
2009-01-29 19:23   ` Ben Hutchings
2009-01-29 19:17 ` [PATCH 04/20] sfc: SFX7101: Remove workaround for bad " Ben Hutchings
2009-01-29 19:23   ` Ben Hutchings
2009-01-29 19:17 ` [PATCH 05/20] sfc: SFT9001/SFN4111T: Check PHY boot status during board initialisation Ben Hutchings
2009-01-29 19:17 ` [PATCH 06/20] sfc: SFT9001: Fix speed reporting in 1G PHY loopback Ben Hutchings
2009-01-29 19:18 ` [PATCH 07/20] sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 Ben Hutchings
2009-01-29 19:19 ` [PATCH 08/20] sfc: Fix post-reset MAC selection Ben Hutchings
2009-01-29 19:19 ` [PATCH 09/20] sfc: Reinitialise the PHY completely in case of a PHY or NIC reset Ben Hutchings
2009-01-29 19:19 ` [PATCH 10/20] sfc: Test for PHYXS faults whenever we cannot test link state bits Ben Hutchings
2009-01-29 19:19 ` [PATCH 11/20] sfc: Update board info for hardware monitor on SFN4111T-R5 and later Ben Hutchings
2009-01-29 19:20 ` [PATCH 12/20] sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B Ben Hutchings
2009-01-29 19:20 ` [PATCH 13/20] sfc: SFX7101/SFT9001: Fix AN advertisements Ben Hutchings
2009-01-29 19:20 ` [PATCH 14/20] sfc: Remove "XFP" from log messages that are not specific to XFP Ben Hutchings
2009-01-29 19:20 ` [PATCH 15/20] sfc: Fix reporting of PHY id Ben Hutchings
2009-01-29 19:21 ` [PATCH 16/20] sfc: Add support for QT2025C PHY Ben Hutchings
2009-01-29 19:21 ` [PATCH 17/20] sfc: Delete unused efx_blinker::led_num field Ben Hutchings
2009-01-29 19:21 ` [PATCH 18/20] sfc: Clean up LED control Ben Hutchings
2009-01-29 19:21 ` [PATCH 19/20] sfc: Add support for SFN4112F SFP+ reference design Ben Hutchings
2009-01-29 19:22 ` [PATCH 20/20] sfc: Replace stats_enabled flag with a disable count Ben Hutchings
2009-01-29 23:26 ` [PATCH 00/20] sfc: Fixes and new PHY support for 2.6.29 David Miller
2009-01-30  1:05   ` Ben Hutchings
2009-01-30  1:08     ` David Miller
2009-01-30  3:48       ` [PATCH 01/11] sfc: SFT9001: Enable robust link training Ben Hutchings
2009-01-30 22:09         ` David Miller
2009-01-31  0:04           ` Ben Hutchings
2009-01-31  0:02             ` David Miller
2009-01-30  3:48       ` [PATCH 02/11] sfc: SFX7101: Remove workaround for bad " Ben Hutchings
2009-01-30  3:49       ` [PATCH 03/11] sfc: SFT9001: Fix speed reporting in 1G PHY loopback Ben Hutchings
2009-01-30  3:49       ` [PATCH 04/11] sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 Ben Hutchings
2009-01-30  3:49       ` [PATCH 05/11] sfc: Fix post-reset MAC selection Ben Hutchings
2009-01-30  3:50       ` [PATCH 06/11] sfc: Reinitialise the PHY completely in case of a PHY or NIC reset Ben Hutchings
2009-01-30  3:51       ` [PATCH 07/11] sfc: Test for PHYXS faults whenever we cannot test link state bits Ben Hutchings
2009-01-30  3:51       ` [PATCH 08/11] sfc: Update board info for hardware monitor on SFN4111T-R5 and later Ben Hutchings
2009-01-30  3:52       ` [PATCH 09/11] sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B Ben Hutchings
2009-01-30  3:59       ` [PATCH 10/11] sfc: SFX7101/SFT9001: Fix AN advertisements Ben Hutchings
2009-01-30  4:00       ` [PATCH 11/11] sfc: Replace stats_enabled flag with a disable count Ben Hutchings

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1233256603.3656.15.camel@achroite \
    --to=bhutchings@solarflare.com \
    --cc=davem@davemloft.net \
    --cc=linux-net-drivers@solarflare.com \
    --cc=netdev@vger.kernel.org \
    --cc=roel.kluin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).