From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 15/20] sfc: Fix reporting of PHY id
Date: Thu, 29 Jan 2009 19:20:47 +0000 [thread overview]
Message-ID: <1233256847.3656.41.camel@achroite> (raw)
In-Reply-To: <1233256358.3656.9.camel@achroite>
Shuffle bits of the OUI into the conventional written order.
Replace PHY id component macros with functions.
Zero-pad PHY id components in log messages.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
drivers/net/sfc/mdio_10g.c | 15 +++++++++++++++
drivers/net/sfc/mdio_10g.h | 8 ++++----
drivers/net/sfc/xfp_phy.c | 6 +++---
3 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 4462fb5..9f5ec3e 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -17,6 +17,21 @@
#include "boards.h"
#include "workarounds.h"
+unsigned mdio_id_oui(u32 id)
+{
+ unsigned oui = 0;
+ int i;
+
+ /* The bits of the OUI are designated a..x, with a=0 and b variable.
+ * In the id register c is the MSB but the OUI is conventionally
+ * written as bytes h..a, p..i, x..q. Reorder the bits accordingly. */
+ for (i = 0; i < 22; ++i)
+ if (id & (1 << (i + 10)))
+ oui |= 1 << (i ^ 7);
+
+ return oui;
+}
+
int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
int spins, int spintime)
{
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 8ba4977..7014d22 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -70,10 +70,10 @@
#define MDIO_MMDREG_STAT1_LPABLE_LBN (1)
#define MDIO_MMDREG_STAT1_LPABLE_WIDTH (1)
-/* Bits in ID reg */
-#define MDIO_ID_REV(_id32) (_id32 & 0xf)
-#define MDIO_ID_MODEL(_id32) ((_id32 >> 4) & 0x3f)
-#define MDIO_ID_OUI(_id32) (_id32 >> 10)
+/* Bits in combined ID regs */
+static inline unsigned mdio_id_rev(u32 id) { return id & 0xf; }
+static inline unsigned mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
+extern unsigned mdio_id_oui(u32 id);
/* Bits in MMDREG_DEVS0/1. Someone thoughtfully layed things out
* so the 'bit present' bit number of an MMD is the number of
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index 5d1c7f8..2df467d 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -88,9 +88,9 @@ static int xfp_phy_init(struct efx_nic *efx)
return -ENOMEM;
efx->phy_data = phy_data;
- EFX_INFO(efx, "PHY ID reg %x (OUI %x model %x revision %x)\n",
- devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
- MDIO_ID_REV(devid));
+ EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
+ devid, mdio_id_oui(devid), mdio_id_model(devid),
+ mdio_id_rev(devid));
phy_data->phy_mode = efx->phy_mode;
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next prev parent reply other threads:[~2009-01-29 19:20 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 19:12 [PATCH 00/20] sfc: Fixes and new PHY support for 2.6.29 Ben Hutchings
2009-01-29 19:15 ` [PATCH 01/20] sfc: SFT9001: Include non-breaking cable diagnostics in online self-tests Ben Hutchings
2009-01-29 19:16 ` [PATCH 02/20] sfc: Fix test for MDIO read failure Ben Hutchings
2009-01-29 19:17 ` [PATCH 03/20] sfc: SFT9001: Enable robust link training Ben Hutchings
2009-01-29 19:23 ` Ben Hutchings
2009-01-29 19:17 ` [PATCH 04/20] sfc: SFX7101: Remove workaround for bad " Ben Hutchings
2009-01-29 19:23 ` Ben Hutchings
2009-01-29 19:17 ` [PATCH 05/20] sfc: SFT9001/SFN4111T: Check PHY boot status during board initialisation Ben Hutchings
2009-01-29 19:17 ` [PATCH 06/20] sfc: SFT9001: Fix speed reporting in 1G PHY loopback Ben Hutchings
2009-01-29 19:18 ` [PATCH 07/20] sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 Ben Hutchings
2009-01-29 19:19 ` [PATCH 08/20] sfc: Fix post-reset MAC selection Ben Hutchings
2009-01-29 19:19 ` [PATCH 09/20] sfc: Reinitialise the PHY completely in case of a PHY or NIC reset Ben Hutchings
2009-01-29 19:19 ` [PATCH 10/20] sfc: Test for PHYXS faults whenever we cannot test link state bits Ben Hutchings
2009-01-29 19:19 ` [PATCH 11/20] sfc: Update board info for hardware monitor on SFN4111T-R5 and later Ben Hutchings
2009-01-29 19:20 ` [PATCH 12/20] sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B Ben Hutchings
2009-01-29 19:20 ` [PATCH 13/20] sfc: SFX7101/SFT9001: Fix AN advertisements Ben Hutchings
2009-01-29 19:20 ` [PATCH 14/20] sfc: Remove "XFP" from log messages that are not specific to XFP Ben Hutchings
2009-01-29 19:20 ` Ben Hutchings [this message]
2009-01-29 19:21 ` [PATCH 16/20] sfc: Add support for QT2025C PHY Ben Hutchings
2009-01-29 19:21 ` [PATCH 17/20] sfc: Delete unused efx_blinker::led_num field Ben Hutchings
2009-01-29 19:21 ` [PATCH 18/20] sfc: Clean up LED control Ben Hutchings
2009-01-29 19:21 ` [PATCH 19/20] sfc: Add support for SFN4112F SFP+ reference design Ben Hutchings
2009-01-29 19:22 ` [PATCH 20/20] sfc: Replace stats_enabled flag with a disable count Ben Hutchings
2009-01-29 23:26 ` [PATCH 00/20] sfc: Fixes and new PHY support for 2.6.29 David Miller
2009-01-30 1:05 ` Ben Hutchings
2009-01-30 1:08 ` David Miller
2009-01-30 3:48 ` [PATCH 01/11] sfc: SFT9001: Enable robust link training Ben Hutchings
2009-01-30 22:09 ` David Miller
2009-01-31 0:04 ` Ben Hutchings
2009-01-31 0:02 ` David Miller
2009-01-30 3:48 ` [PATCH 02/11] sfc: SFX7101: Remove workaround for bad " Ben Hutchings
2009-01-30 3:49 ` [PATCH 03/11] sfc: SFT9001: Fix speed reporting in 1G PHY loopback Ben Hutchings
2009-01-30 3:49 ` [PATCH 04/11] sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 Ben Hutchings
2009-01-30 3:49 ` [PATCH 05/11] sfc: Fix post-reset MAC selection Ben Hutchings
2009-01-30 3:50 ` [PATCH 06/11] sfc: Reinitialise the PHY completely in case of a PHY or NIC reset Ben Hutchings
2009-01-30 3:51 ` [PATCH 07/11] sfc: Test for PHYXS faults whenever we cannot test link state bits Ben Hutchings
2009-01-30 3:51 ` [PATCH 08/11] sfc: Update board info for hardware monitor on SFN4111T-R5 and later Ben Hutchings
2009-01-30 3:52 ` [PATCH 09/11] sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B Ben Hutchings
2009-01-30 3:59 ` [PATCH 10/11] sfc: SFX7101/SFT9001: Fix AN advertisements Ben Hutchings
2009-01-30 4:00 ` [PATCH 11/11] sfc: Replace stats_enabled flag with a disable count Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1233256847.3656.41.camel@achroite \
--to=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).