From: Lin Ming <ming.m.lin@intel.com>
To: Ed Tomlinson <edt@aei.ca>
Cc: Zhang Rui <rui.zhang@intel.com>,
LKML <linux-kernel@vger.kernel.org>, Avi Kivity <avi@redhat.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>
Subject: Re: 2.6.30-rc1 A few issues and a stall
Date: Mon, 13 Apr 2009 10:50:31 +0800 [thread overview]
Message-ID: <1239591031.4445.4091.camel@minggr.sh.intel.com> (raw)
In-Reply-To: <1239588307.7661.209.camel@rzhang-dt>
On Mon, 2009-04-13 at 10:05 +0800, Zhang Rui wrote:
> On Sun, 2009-04-12 at 23:24 +0800, Ed Tomlinson wrote:
> > Hi,
> >
> > I got tired of building out of tree DRM drivers so decided to try 2.6.30-rc1. For simple tasks
> > it works fine, for slightly more complex ones it is not quite as good...
> >
> > Here is an example. I normally start a kvm session with the commands below:
> >
> > ed@grover ~/vm $ sudo modprobe tun
> > ed@grover ~/vm $ sudo brctl addbr br0
> > ed@grover ~/vm $ sudo ifconfig br0 192.168.100.254 netmask 255.255.255.0 up
> > ed@grover ~/vm $ sudo tunctl -b -u ed -t qtap0
> > qtap0
> > ed@grover ~/vm $ sudo brctl addif br0 qtap0
> > ed@grover ~/vm $ sudo ifconfig qtap0 up 0.0.0.0 promisc
> > ed@grover ~/vm $ sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> > iptables v1.4.2: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
> > Perhaps iptables or your kernel needs to be upgraded.
> >
> > Issue 1 - I need to manually modprobe be get iptables to work. This exact procedure worked in 2.6.29.
> >
> > ed@grover ~/vm $ sudo modprobe nf_nat
> > ed@grover ~/vm $ sudo modprobe ipt_MASQUERADE
> > ed@grover ~/vm $ sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> >
> > Once the above networking stuff is setup I start kvm with the command below
> >
> > QEMU_AUDIO_DRV=alsa kvm -m 1024 -cdrom /mnt/sdc4/divx/archlinux-2009.02-ftp-i686.iso -boot c -smp 3 -usb -usbdevice tablet -vga std -drive file=arch.img -net nic,macaddr=52:54:00:12:34:23 -net tap,ifname=qtap0,script=no -soundhw all -mem-path /hugepages
> >
> > which works and the kvm session boots just fine.
> >
> > Issue 2. When I attempt to ping outside the kvm session the pc (not just the kvm session) hangs.
> > Its impossible to kill the kvm session and there are numerious info messages from RCU (tree RCU enabled)
> > about stalls.
> >
> > Issue 3. ACPI is having fun during startup. This does not seem to cause problems later but is
> > noisy and probably should be fixed before .30's release.
> >
> this is a duplicate of bug
> http://bugzilla.kernel.org/show_bug.cgi?id=13036
> please try the patch in comment #6 there and see if it helps.
please also have a try the patch in comment #10 (don't apply the patch
in comment #6).
Thanks.
>
> thanks,
> rui
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-04-13 2:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-12 15:24 2.6.30-rc1 A few issues and a stall Ed Tomlinson
2009-04-13 2:05 ` Zhang Rui
2009-04-13 2:50 ` Lin Ming [this message]
2009-04-13 22:22 ` Ed Tomlinson
2009-04-14 10:03 ` Avi Kivity
2009-04-14 12:32 ` Ed Tomlinson
2009-04-14 12:39 ` Avi Kivity
2009-04-14 22:03 ` Ed Tomlinson
2009-04-14 22:54 ` 2.6.30-rc1 A few issues and a stall (nmi_watchdog traceback) Ed Tomlinson
2009-04-14 23:09 ` Stephen Hemminger
2009-04-14 23:54 ` Ed Tomlinson
2009-04-15 1:27 ` Ed Tomlinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1239591031.4445.4091.camel@minggr.sh.intel.com \
--to=ming.m.lin@intel.com \
--cc=avi@redhat.com \
--cc=edt@aei.ca \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).