From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kasper Sandberg Subject: WARNING: at net/sched/sch_generic.c:226 kernel 2.6.29.2 Date: Fri, 08 May 2009 13:59:43 +0200 Message-ID: <1241783983.29072.15.camel@localhost> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Cc: Francois Romieu , Mario Limonciello , netdev@vger.kernel.org To: LKML Mailinglist Return-path: Received: from pasmtpb.tele.dk ([80.160.77.98]:44758 "EHLO pasmtpB.tele.dk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753578AbZEHM0r (ORCPT ); Fri, 8 May 2009 08:26:47 -0400 Sender: netdev-owner@vger.kernel.org List-ID: Hello. Im having some problems with the nic on my d945gclf atom board: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) this is on 2.6.29.2 basically, under load, it comes with the warning message: [49086.000030] ------------[ cut here ]------------ [49086.000038] WARNING: at net/sched/sch_generic.c:226 dev_watchdog +0xf6/0x18b() [49086.000043] Hardware name: [49086.000047] NETDEV WATCHDOG: eth0 (r8169): transmit timed out [49086.000056] Modules linked in: nf_nat_ftp nf_nat_irc nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat ipt_REJECT xt_tcpudp ipt_LOG xt_limit xt_state nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables smsc47m1 smsc47m192 hwmon_vid loop button snd_pcsp i2c_i801 psmouse snd_pcm snd_timer i2c_core serio_raw snd soundcore snd_page_alloc rng_core iTCO_wdt evdev ext3 jbd mbcache sd_mod usbhid hid piix usb_storage ide_pci_generic ide_core ata_generic ata_piix libata ehci_hcd uhci_hcd 8139too scsi_mod usbcore r8169 mii thermal processor fan thermal_sys [49086.000155] Pid: 0, comm: swapper Not tainted 2.6.29.2 #1 [49086.000159] Call Trace: [49086.000169] [] warn_slowpath+0x80/0xb6 [49086.000178] [] activate_task+0x1c/0x21 [49086.000184] [] try_to_wake_up+0x160/0x169 [49086.000193] [] autoremove_wake_function+0xd/0x2d [49086.000199] [] __wake_up_common+0x34/0x59 [49086.000205] [] __wake_up+0x29/0x39 [49086.000212] [] sk_reset_timer+0xc/0x19 [49086.000220] [] tcp_v4_rcv+0x40e/0x642 [49086.000241] [] rtl8139_interrupt+0x3a9/0x3b4 [8139too] [49086.000248] [] ack_apic_level+0x88/0x221 [49086.000255] [] dev_watchdog+0xf6/0x18b [49086.000268] [] common_interrupt+0x27/0x2c [49086.000275] [] __netdev_watchdog_up+0x3f/0x52 [49086.000281] [] dev_watchdog+0x0/0x18b [49086.000287] [] dev_watchdog+0x0/0x18b [49086.000295] [] run_timer_softirq+0x14a/0x1b4 [49086.000301] [] dev_watchdog+0x0/0x18b [49086.000307] [] __do_softirq+0x8c/0x115 [49086.000313] [] do_softirq+0x45/0x53 [49086.000319] [] irq_exit+0x35/0x62 [49086.000325] [] smp_apic_timer_interrupt+0x71/0x7b [49086.000331] [] apic_timer_interrupt+0x28/0x30 [49086.000339] [] mwait_idle+0x4c/0x5a [49086.000345] [] cpu_idle+0x60/0x79 [49086.000349] ---[ end trace 31545b0747da8e68 ]--- [49086.023022] r8169: eth0: link up now, the time till it comes and responds again varies, from a few seconds to minutes. lspci -vvx: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Intel Corporation Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: r8169 Kernel modules: r8169 00: ec 10 36 81 07 04 10 00 02 00 00 02 10 00 00 00 10: 01 20 00 00 00 00 00 00 04 00 20 48 00 00 00 00 20: 0c 00 00 48 00 00 00 00 00 00 00 00 86 80 01 00 30: 00 00 fe ff 40 00 00 00 00 00 00 00 0b 01 00 00 this also occurs in 2.6.26, i know lots of people have issues with it on debian lenny. it also happens on other hardware supported by the r8169 driver, for instance, on a d945gclf2 board i have, with "RTL8111/8168B". i read on debian forums that ubuntu users have tried the driver which realtek provides with success, i havent tried that myself though. can i be of assistance with any other data(kernel log at bottom)? Thanks! ------ [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29.2 (root@redeeevm) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Thu May 7 23:08:05 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f533000 (usable) [ 0.000000] BIOS-e820: 000000003f533000 - 000000003f53b000 (reserved) [ 0.000000] BIOS-e820: 000000003f53b000 - 000000003f5cb000 (usable) [ 0.000000] BIOS-e820: 000000003f5cb000 - 000000003f5cf000 (reserved) [ 0.000000] BIOS-e820: 000000003f5cf000 - 000000003f661000 (usable) [ 0.000000] BIOS-e820: 000000003f661000 - 000000003f6f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f6f2000 (usable) [ 0.000000] BIOS-e820: 000000003f6f2000 - 000000003f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f700 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 379e7000 - 37fefc41 [ 0.000000] Allocated new RAMDISK: 004ab000 - 00ab3c41 [ 0.000000] Move RAMDISK from 00000000379e7000 - 0000000037fefc40 to 004ab000 - 00ab3c40 [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] ACPI: RSDT 3F6FD038, 003C (r1 INTEL D945GLF 43 1000013) [ 0.000000] ACPI: FACP 3F6FC000, 0074 (r1 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 3F6F7000, 477C (r1 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] ACPI: FACS 3F6A3000, 0040 [ 0.000000] ACPI: APIC 3F6F6000, 0078 (r1 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] ACPI: WDDT 3F6F5000, 0040 (r1 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] ACPI: MCFG 3F6F4000, 003C (r1 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] ACPI: ASF! 3F6F3000, 00A6 (r32 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] ACPI: HPET 3F6F2000, 0038 (r1 INTEL D945GLF 43 MSFT 1000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00004a74c4] TEXT DATA BSS ==> [0000100000 - 00004a74c4] [ 0.000000] #4 [00004a8000 - 00004ab000] INIT_PG_TABLE ==> [00004a8000 - 00004ab000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00004ab000 - 0000ab3c41] NEW RAMDISK ==> [00004ab000 - 0000ab3c41] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe200] 000fe200 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f700 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000008f [ 0.000000] 0: 0x00000100 -> 0x0003f533 [ 0.000000] 0: 0x0003f53b -> 0x0003f5cb [ 0.000000] 0: 0x0003f5cf -> 0x0003f661 [ 0.000000] 0: 0x0003f6f0 -> 0x0003f6f2 [ 0.000000] 0: 0x0003f6ff -> 0x0003f700 [ 0.000000] On node 0 totalpages: 259559 [ 0.000000] free_area_init_node: node 0, pgdat c03b4f00, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32091 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257528 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.411 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1018892k/1039360k available (1960k kernel code, 19032k reserved, 908k data, 328k init, 129384k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.004000] .init : 0xc03d3000 - 0xc0425000 ( 328 kB) [ 0.004000] .data : 0xc02ea3d3 - 0xc03cd728 ( 908 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ea3d3 (1960 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.82 BogoMIPS (lpj=6385644) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#0. [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018906] ACPI: Core revision 20081204 [ 0.028440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068219] CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3192.12 BogoMIPS (lpj=6384255) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#1. [ 0.160290] CPU1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.160328] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164051] Brought up 2 CPUs [ 0.164058] Total of 2 processors activated (6384.94 BogoMIPS). [ 0.164115] CPU0 attaching sched-domain: [ 0.164120] domain 0: span 0-1 level SIBLING [ 0.164125] groups: 0 1 [ 0.164134] CPU1 attaching sched-domain: [ 0.164138] domain 0: span 0-1 level SIBLING [ 0.164142] groups: 1 0 [ 0.164265] net_namespace: 1056 bytes [ 0.164265] Booting paravirtualized kernel on bare hardware [ 0.164562] NET: Registered protocol family 16 [ 0.164562] ACPI: bus type pci registered [ 0.164562] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. [ 0.168487] PCI: Using configuration type 1 for base access [ 0.168526] bio: create slab at 0 [ 0.172368] ACPI: EC: Look up EC in DSDT [ 0.177923] ACPI: Interpreter enabled [ 0.177932] ACPI: (supports S0 S1 S3 S4 S5) [ 0.177977] ACPI: Using IOAPIC for interrupt routing [ 0.186144] ACPI: No dock devices found. [ 0.186144] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.186144] pci 0000:00:02.0: reg 10 32bit mmio: [0x48300000-0x4837ffff] [ 0.186144] pci 0000:00:02.0: reg 14 io port: [0x30e0-0x30e7] [ 0.186144] pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x47ffffff] [ 0.186144] pci 0000:00:02.0: reg 1c 32bit mmio: [0x48380000-0x4839ffff] [ 0.186144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.186144] pci 0000:00:1c.0: PME# disabled [ 0.186144] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.186144] pci 0000:00:1c.2: PME# disabled [ 0.186144] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.186144] pci 0000:00:1c.3: PME# disabled [ 0.186144] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f] [ 0.186144] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f] [ 0.186144] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] [ 0.186144] pci 0000:00:1d.3: reg 20 io port: [0x3020-0x303f] [ 0.186144] pci 0000:00:1d.7: reg 10 32bit mmio: [0x483a0000-0x483a03ff] [ 0.186144] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.186144] pci 0000:00:1d.7: PME# disabled [ 0.186144] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.186144] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.186144] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.186144] pci 0000:00:1f.1: reg 10 io port: [0x30d8-0x30df] [ 0.188008] pci 0000:00:1f.1: reg 14 io port: [0x30f4-0x30f7] [ 0.188018] pci 0000:00:1f.1: reg 18 io port: [0x30d0-0x30d7] [ 0.188028] pci 0000:00:1f.1: reg 1c io port: [0x30f0-0x30f3] [ 0.188038] pci 0000:00:1f.1: reg 20 io port: [0x30b0-0x30bf] [ 0.188084] pci 0000:00:1f.2: reg 10 io port: [0x30c8-0x30cf] [ 0.188093] pci 0000:00:1f.2: reg 14 io port: [0x30ec-0x30ef] [ 0.188102] pci 0000:00:1f.2: reg 18 io port: [0x30c0-0x30c7] [ 0.188111] pci 0000:00:1f.2: reg 1c io port: [0x30e8-0x30eb] [ 0.188121] pci 0000:00:1f.2: reg 20 io port: [0x30a0-0x30af] [ 0.188159] pci 0000:00:1f.2: PME# supported from D3hot [ 0.188165] pci 0000:00:1f.2: PME# disabled [ 0.188214] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] [ 0.188284] pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.188309] pci 0000:01:00.0: reg 18 64bit mmio: [0x48200000-0x48200fff] [ 0.188328] pci 0000:01:00.0: reg 20 64bit mmio: [0x48000000-0x4800ffff] [ 0.188340] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.188398] pci 0000:01:00.0: supports D1 D2 [ 0.188402] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.188410] pci 0000:01:00.0: PME# disabled [ 0.188467] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.188474] pci 0000:00:1c.0: bridge 32bit mmio: [0x48200000-0x482fffff] [ 0.188484] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x48000000-0x480fffff] [ 0.188612] pci 0000:04:00.0: reg 10 io port: [0x1000-0x10ff] [ 0.188622] pci 0000:04:00.0: reg 14 32bit mmio: [0x48100000-0x481000ff] [ 0.188654] pci 0000:04:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.188689] pci 0000:04:00.0: supports D1 D2 [ 0.188693] pci 0000:04:00.0: PME# supported from D1 D2 D3hot [ 0.188700] pci 0000:04:00.0: PME# disabled [ 0.188751] pci 0000:00:1e.0: transparent bridge [ 0.188758] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] [ 0.188765] pci 0000:00:1e.0: bridge 32bit mmio: [0x48100000-0x481fffff] [ 0.188793] pci_bus 0000:00: on NUMA node 0 [ 0.188806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.189156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.189527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.189653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.189777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.196421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.196421] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.196613] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.196824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.197033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.197246] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) [ 0.197455] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.197668] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) [ 0.200140] PCI: Using ACPI for IRQ routing [ 0.216033] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.216045] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.240393] pnp: PnP ACPI init [ 0.240413] ACPI: bus type pnp registered [ 0.245421] pnp: PnP ACPI: found 10 devices [ 0.245428] ACPI: ACPI bus type pnp unregistered [ 0.245435] PnPBIOS: Disabled by ACPI PNP [ 0.245457] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.245463] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 0.245470] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.245476] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.245482] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.245488] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.245495] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.245501] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 0.245507] system 00:01: iomem range 0xc0000-0xdffff could not be reserved [ 0.245514] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 0.245530] system 00:06: ioport range 0x500-0x53f has been reserved [ 0.245536] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.245542] system 00:06: ioport range 0x680-0x6ff has been reserved [ 0.282762] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.282769] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.282778] pci 0000:00:1c.0: MEM window: 0x48200000-0x482fffff [ 0.282786] pci 0000:00:1c.0: PREFETCH window: 0x00000048000000-0x000000480fffff [ 0.282796] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 [ 0.282800] pci 0000:00:1c.2: IO window: disabled [ 0.282807] pci 0000:00:1c.2: MEM window: disabled [ 0.282813] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.282822] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.282826] pci 0000:00:1c.3: IO window: disabled [ 0.282833] pci 0000:00:1c.3: MEM window: disabled [ 0.282839] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.282849] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.282855] pci 0000:00:1e.0: IO window: 0x1000-0x1fff [ 0.282863] pci 0000:00:1e.0: MEM window: 0x48100000-0x481fffff [ 0.282870] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x000000500fffff [ 0.282897] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.282905] pci 0000:00:1c.0: setting latency timer to 64 [ 0.282919] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.282926] pci 0000:00:1c.2: setting latency timer to 64 [ 0.282938] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.282945] pci 0000:00:1c.3: setting latency timer to 64 [ 0.282955] pci 0000:00:1e.0: setting latency timer to 64 [ 0.282963] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.282968] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.282974] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.282979] pci_bus 0000:01: resource 1 mem: [0x48200000-0x482fffff] [ 0.282984] pci_bus 0000:01: resource 2 mem: [0x48000000-0x480fffff] [ 0.282989] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.282994] pci_bus 0000:02: resource 0 mem: [0x0-0x0] [ 0.282998] pci_bus 0000:02: resource 1 mem: [0x0-0x0] [ 0.283003] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 0.283007] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.283012] pci_bus 0000:03: resource 0 mem: [0x0-0x0] [ 0.283016] pci_bus 0000:03: resource 1 mem: [0x0-0x0] [ 0.283021] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.283025] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.283030] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] [ 0.283035] pci_bus 0000:04: resource 1 mem: [0x48100000-0x481fffff] [ 0.283040] pci_bus 0000:04: resource 2 mem: [0x50000000-0x500fffff] [ 0.283046] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.283050] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.283161] NET: Registered protocol family 2 [ 0.328519] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.329172] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.330151] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.330642] TCP: Hash tables configured (established 131072 bind 65536) [ 0.330648] TCP reno registered [ 0.340582] NET: Registered protocol family 1 [ 0.340790] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.503944] Switched to high resolution mode on CPU 0 [ 0.702382] it is [ 1.107280] Freeing initrd memory: 6179k freed [ 1.109153] audit: initializing netlink socket (disabled) [ 1.109177] type=2000 audit(1241734157.108:1): initialized [ 1.109513] highmem bounce pool size: 64 pages [ 1.109523] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.109722] VFS: Disk quotas dquot_6.5.2 [ 1.109790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.109898] msgmni has been set to 1749 [ 1.110137] alg: No test for stdrng (krng) [ 1.110268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.110275] io scheduler noop registered [ 1.110279] io scheduler anticipatory registered [ 1.110283] io scheduler deadline registered [ 1.110318] io scheduler cfq registered (default) [ 1.110341] pci 0000:00:02.0: Boot video device [ 1.110736] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.110803] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.111031] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.111093] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X [ 1.111317] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.111379] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X [ 1.112196] isapnp: Scanning for PnP cards... [ 1.465196] isapnp: No Plug & Play device found [ 1.471293] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.475581] brd: module loaded [ 1.475905] PNP: No PS/2 controller found. Probing ports directly. [ 1.478910] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.478923] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.479269] mice: PS/2 mouse device common for all mice [ 1.479395] rtc_cmos 00:03: RTC can wake from S4 [ 1.479520] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.479554] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.479629] cpuidle: using governor ladder [ 1.479635] cpuidle: using governor menu [ 1.479645] No iBFT detected. [ 1.480454] TCP cubic registered [ 1.480460] NET: Registered protocol family 17 [ 1.480478] Using IPI No-Shortcut mode [ 1.480771] registered taskstats version 1 [ 1.481058] rtc_cmos 00:03: setting system clock to 2009-05-07 22:09:18 UTC (1241734158) [ 1.481357] Freeing unused kernel memory: 328k freed [ 1.659184] processor ACPI_CPU:00: registered as cooling_device0 [ 1.659319] processor ACPI_CPU:01: registered as cooling_device1 [ 1.977367] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.977407] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.977432] r8169 0000:01:00.0: setting latency timer to 64 [ 1.977584] r8169 0000:01:00.0: irq 27 for MSI/MSI-X [ 1.978295] eth0: RTL8102e at 0xf8092000, 00:1c:c0:6f:3a:03, XID 24a00000 IRQ 27 [ 2.519177] usbcore: registered new interface driver usbfs [ 2.519256] usbcore: registered new interface driver hub [ 2.562783] usbcore: registered new device driver usb [ 2.640953] SCSI subsystem initialized [ 2.650879] 8139too Fast Ethernet driver 0.9.28 [ 2.650957] 8139too 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.652253] eth1: RealTek RTL8139 at 0x1000, 00:11:6b:96:a6:04, IRQ 21 [ 2.652261] eth1: Identified 8139 chip type 'RTL-8100B/8139D' [ 2.662637] uhci_hcd: USB Universal Host Controller Interface driver [ 2.662739] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.662759] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.662767] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.662857] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.662910] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080 [ 2.663017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.663025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.663032] usb usb1: Product: UHCI Host Controller [ 2.663038] usb usb1: Manufacturer: Linux 2.6.29.2 uhci_hcd [ 2.663043] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.663201] usb usb1: configuration #1 chosen from 1 choice [ 2.663289] hub 1-0:1.0: USB hub found [ 2.663310] hub 1-0:1.0: 2 ports detected [ 2.663640] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.663660] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.663668] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.663733] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 2.663795] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060 [ 2.663900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.663910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.663917] usb usb2: Product: UHCI Host Controller [ 2.663923] usb usb2: Manufacturer: Linux 2.6.29.2 uhci_hcd [ 2.663928] usb usb2: SerialNumber: 0000:00:1d.1 [ 2.664098] usb usb2: configuration #1 chosen from 1 choice [ 2.664183] hub 2-0:1.0: USB hub found [ 2.664205] hub 2-0:1.0: 2 ports detected [ 2.664478] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.664495] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.664545] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.664616] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 2.664671] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 2.664770] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.664778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.664785] usb usb3: Product: UHCI Host Controller [ 2.664791] usb usb3: Manufacturer: Linux 2.6.29.2 uhci_hcd [ 2.664798] usb usb3: SerialNumber: 0000:00:1d.2 [ 2.664958] usb usb3: configuration #1 chosen from 1 choice [ 2.665038] hub 3-0:1.0: USB hub found [ 2.665057] hub 3-0:1.0: 2 ports detected [ 2.665321] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.665338] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.665347] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.665411] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 2.665462] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020 [ 2.665557] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.665565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.665572] usb usb4: Product: UHCI Host Controller [ 2.665578] usb usb4: Manufacturer: Linux 2.6.29.2 uhci_hcd [ 2.665584] usb usb4: SerialNumber: 0000:00:1d.3 [ 2.665727] usb usb4: configuration #1 chosen from 1 choice [ 2.665808] hub 4-0:1.0: USB hub found [ 2.665829] hub 4-0:1.0: 2 ports detected [ 2.673289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.673298] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.673361] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.673460] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.673470] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.673559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 2.677482] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.677495] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.677515] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x483a0000 [ 2.724038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.724112] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.724121] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.724129] usb usb5: Product: EHCI Host Controller [ 2.724135] usb usb5: Manufacturer: Linux 2.6.29.2 ehci_hcd [ 2.724141] usb usb5: SerialNumber: 0000:00:1d.7 [ 2.724327] usb usb5: configuration #1 chosen from 1 choice [ 2.724415] hub 5-0:1.0: USB hub found [ 2.724439] hub 5-0:1.0: 8 ports detected [ 2.735291] libata version 3.00 loaded. [ 2.743963] ata_piix 0000:00:1f.1: version 2.12 [ 2.743991] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.744093] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.745652] scsi0 : ata_piix [ 2.745889] scsi1 : ata_piix [ 2.747004] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14 [ 2.747014] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15 [ 2.900637] ata2: port disabled. ignoring. [ 2.900696] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.900705] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.900766] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.900861] scsi2 : ata_piix [ 2.901427] scsi3 : ata_piix [ 2.901752] ata3: SATA max UDMA/133 cmd 0x30c8 ctl 0x30ec bmdma 0x30a0 irq 19 [ 2.901762] ata4: SATA max UDMA/133 cmd 0x30c0 ctl 0x30e8 bmdma 0x30a8 irq 19 [ 3.088022] usb 5-8: new high speed USB device using ehci_hcd and address 3 [ 3.234966] usb 5-8: New USB device found, idVendor=0951, idProduct=1607 [ 3.234976] usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.234984] usb 5-8: Product: DataTraveler 2.0 [ 3.234990] usb 5-8: Manufacturer: Kingston [ 3.234996] usb 5-8: SerialNumber: 001372982B41F940362E0309 [ 3.235185] usb 5-8: configuration #1 chosen from 1 choice [ 3.279167] Uniform Multi-Platform E-IDE driver [ 3.294941] Initializing USB Mass Storage driver... [ 3.296656] scsi4 : SCSI emulation for USB Mass Storage devices [ 3.298134] usbcore: registered new interface driver usb-storage [ 3.298144] USB Mass Storage support registered. [ 3.298621] usb-storage: device found at 3 [ 3.298627] usb-storage: waiting for device to settle before scanning [ 3.484026] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 3.663679] usb 2-2: New USB device found, idVendor=046d, idProduct=c308 [ 3.663686] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.663692] usb 2-2: Product: Logitech USB Keyboard [ 3.663696] usb 2-2: Manufacturer: Logitech [ 3.663855] usb 2-2: configuration #1 chosen from 1 choice [ 3.729615] usbcore: registered new interface driver hiddev [ 3.744498] input: Logitech Logitech USB Keyboard as /class/input/input0 [ 3.760150] generic-usb 0003:046D:C308.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-2/input0 [ 3.797909] input: Logitech Logitech USB Keyboard as /class/input/input1 [ 3.820140] generic-usb 0003:046D:C308.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-2/input1 [ 3.820175] usbcore: registered new interface driver usbhid [ 3.820182] usbhid: v2.6:USB HID core driver [ 8.296731] usb-storage: device scan complete [ 8.297221] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 8.332953] Driver 'sd' needs updating - please use bus_type methods [ 8.336062] sd 4:0:0:0: [sda] 3903578 512-byte hardware sectors: (1.99 GB/1.86 GiB) [ 8.336556] sd 4:0:0:0: [sda] Write Protect is off [ 8.336563] sd 4:0:0:0: [sda] Mode Sense: 16 07 09 51 [ 8.336567] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 8.338561] sd 4:0:0:0: [sda] 3903578 512-byte hardware sectors: (1.99 GB/1.86 GiB) [ 8.339053] sd 4:0:0:0: [sda] Write Protect is off [ 8.339060] sd 4:0:0:0: [sda] Mode Sense: 16 07 09 51 [ 8.339064] sd 4:0:0:0: [sda] Assuming drive cache: write through [ 8.339108] sda: sda1 [ 8.340266] sd 4:0:0:0: [sda] Attached SCSI removable disk [ 8.540193] kjournald starting. Commit interval 5 seconds [ 8.540204] EXT3-fs: mounted filesystem with ordered data mode. [ 9.636306] udevd version 125 started [ 11.597986] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 11.598349] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 11.598464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.192439] intel_rng: Firmware space is locked read-only. If you can't or [ 12.192444] intel_rng: don't want to disable this in firmware setup, and if [ 12.192449] intel_rng: you are certain that your system has a functional [ 12.192453] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 13.080106] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.095289] input: PC Speaker as /class/input/input2 [ 13.104952] input: Power Button (FF) as /class/input/input3 [ 13.160136] ACPI: Power Button (FF) [PWRF] [ 13.160337] input: Sleep Button (CM) as /class/input/input4 [ 13.192136] ACPI: Sleep Button (CM) [SLPB] [ 15.089928] EXT3 FS on sda1, internal journal [ 16.071782] loop: module loaded [ 16.216522] i2c-adapter i2c-0: found SMSC47M192 or compatible, version 2, stepping A0 [ 16.311383] smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 [ 16.311459] ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI region RUNT [0x680-0x6ff] [ 16.311467] ACPI: Device needs an ACPI driver [ 17.353751] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 17.639430] r8169: eth0: link up [ 17.639440] r8169: eth0: link up [ 17.881015] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.225088] nf_conntrack version 0.5.0 (16240 buckets, 64960 max) [ 24.225335] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 24.225344] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 24.225351] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.