netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: Divy Le Ray <divy@chelsio.com>, netdev <netdev@vger.kernel.org>
Subject: [PATCH 2/2] cxgb3: Use generic XENPAK LASI register definitions
Date: Wed, 20 May 2009 00:22:30 +0100	[thread overview]
Message-ID: <1242775350.3198.10.camel@achroite> (raw)

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
 drivers/net/cxgb3/ael1002.c |    3 ++-
 drivers/net/cxgb3/common.h  |   10 ----------
 drivers/net/cxgb3/t3_hw.c   |   12 +++++++-----
 3 files changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c
index bebc00d..df1f585 100644
--- a/drivers/net/cxgb3/ael1002.c
+++ b/drivers/net/cxgb3/ael1002.c
@@ -1007,7 +1007,8 @@ static int ael2005_reset(struct cphy *phy, int wait)
 	int err;
 	unsigned int lasi_ctrl;
 
-	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, LASI_CTRL, &lasi_ctrl);
+	err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			   &lasi_ctrl);
 	if (err)
 		return err;
 
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 3147789..79a113b 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -521,16 +521,6 @@ enum {
 	MAC_RXFIFO_SIZE = 32768
 };
 
-/* LASI control and status registers */
-enum {
-	RX_ALARM_CTRL = 0x9000,
-	TX_ALARM_CTRL = 0x9001,
-	LASI_CTRL = 0x9002,
-	RX_ALARM_STAT = 0x9003,
-	TX_ALARM_STAT = 0x9004,
-	LASI_STAT = 0x9005
-};
-
 /* PHY loopback direction */
 enum {
 	PHY_LOOPBACK_TX = 1,
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index c8a865a..505a187 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -472,29 +472,31 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
 
 int t3_phy_lasi_intr_enable(struct cphy *phy)
 {
-	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, LASI_CTRL, 1);
+	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+			     MDIO_PMA_LASI_LSALARM);
 }
 
 int t3_phy_lasi_intr_disable(struct cphy *phy)
 {
-	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, LASI_CTRL, 0);
+	return t3_mdio_write(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0);
 }
 
 int t3_phy_lasi_intr_clear(struct cphy *phy)
 {
 	u32 val;
 
-	return t3_mdio_read(phy, MDIO_MMD_PMAPMD, LASI_STAT, &val);
+	return t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
 }
 
 int t3_phy_lasi_intr_handler(struct cphy *phy)
 {
 	unsigned int status;
-	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, LASI_STAT, &status);
+	int err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT,
+			       &status);
 
 	if (err)
 		return err;
-	return (status & 1) ?  cphy_cause_link_change : 0;
+	return (status & MDIO_PMA_LASI_LSALARM) ? cphy_cause_link_change : 0;
 }
 
 static const struct adapter_info t3_adap_info[] = {

-- 
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.


             reply	other threads:[~2009-05-19 23:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-19 23:22 Ben Hutchings [this message]
2009-05-21  1:52 ` [PATCH 2/2] cxgb3: Use generic XENPAK LASI register definitions Divy Le Ray
2009-05-21  3:52   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1242775350.3198.10.camel@achroite \
    --to=bhutchings@solarflare.com \
    --cc=davem@davemloft.net \
    --cc=divy@chelsio.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).