From: Ben Hutchings <ben@decadent.org.uk>
To: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>,
stable@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH 2/2] netdev: restore MTU change operation
Date: Fri, 10 Jul 2009 04:57:34 +0100 [thread overview]
Message-ID: <1247198254.21924.132.camel@deadeye> (raw)
[-- Attachment #1: Type: text/plain, Size: 6377 bytes --]
alloc_etherdev() used to install a default implementation of this
operation, but it must now be explicitly installed in struct
net_device_ops.
---
It's not clear that all these drivers should allow changing MTU, but
they apparently used to.
This is applicable to 2.6.30 except that fec.c does not need to be
changed.
Ben.
drivers/net/8139too.c | 1 +
drivers/net/arm/ixp4xx_eth.c | 1 +
drivers/net/ehea/ehea_main.c | 1 +
drivers/net/fec.c | 1 +
drivers/net/plip.c | 1 +
drivers/net/smc91x.c | 1 +
drivers/net/smsc911x.c | 1 +
drivers/net/sunvnet.c | 1 +
drivers/net/usb/kaweth.c | 1 +
drivers/net/usb/pegasus.c | 1 +
drivers/net/via-rhine.c | 1 +
11 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 8ae72ec..0e2ba21 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -908,6 +908,7 @@ static const struct net_device_ops rtl8139_netdev_ops = {
.ndo_open = rtl8139_open,
.ndo_stop = rtl8139_close,
.ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = rtl8139_set_mac_address,
.ndo_start_xmit = rtl8139_start_xmit,
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 87fde32..3fe0987 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -1142,6 +1142,7 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_start_xmit = eth_xmit,
.ndo_set_multicast_list = eth_set_mcast_list,
.ndo_do_ioctl = eth_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index c7d1886..e8d46cc 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3080,6 +3080,7 @@ static const struct net_device_ops ehea_netdev_ops = {
.ndo_poll_controller = ehea_netpoll,
#endif
.ndo_get_stats = ehea_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = ehea_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = ehea_set_multicast_list,
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 0f19b74..d4b9807 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1642,6 +1642,7 @@ static const struct net_device_ops fec_netdev_ops = {
.ndo_stop = fec_enet_close,
.ndo_start_xmit = fec_enet_start_xmit,
.ndo_set_multicast_list = set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = fec_timeout,
.ndo_set_mac_address = fec_set_mac_address,
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index b79f776..2ca8b0d 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -270,6 +270,7 @@ static const struct net_device_ops plip_netdev_ops = {
.ndo_stop = plip_close,
.ndo_start_xmit = plip_tx_packet,
.ndo_do_ioctl = plip_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fdcbaf8..1c70e99 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1774,6 +1774,7 @@ static const struct net_device_ops smc_netdev_ops = {
.ndo_start_xmit = smc_hard_start_xmit,
.ndo_tx_timeout = smc_timeout,
.ndo_set_multicast_list = smc_set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 66067f9..94b6d26 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1779,6 +1779,7 @@ static const struct net_device_ops smsc911x_netdev_ops = {
.ndo_get_stats = smsc911x_get_stats,
.ndo_set_multicast_list = smsc911x_set_multicast_list,
.ndo_do_ioctl = smsc911x_do_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = smsc911x_set_mac_address,
#ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index bc74db0..f1e5e45 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -1016,6 +1016,7 @@ static const struct net_device_ops vnet_ops = {
.ndo_open = vnet_open,
.ndo_stop = vnet_close,
.ndo_set_multicast_list = vnet_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = vnet_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = vnet_tx_timeout,
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 238bea1..1f9ec29 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -999,6 +999,7 @@ static const struct net_device_ops kaweth_netdev_ops = {
.ndo_tx_timeout = kaweth_tx_timeout,
.ndo_set_multicast_list = kaweth_set_rx_mode,
.ndo_get_stats = kaweth_netdev_stats,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 9bea2af..631d269 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1493,6 +1493,7 @@ static const struct net_device_ops pegasus_netdev_ops = {
.ndo_set_multicast_list = pegasus_set_multicast,
.ndo_get_stats = pegasus_netdev_stats,
.ndo_tx_timeout = pegasus_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index d3489a3..88c30a5 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -621,6 +621,7 @@ static const struct net_device_ops rhine_netdev_ops = {
.ndo_start_xmit = rhine_start_tx,
.ndo_get_stats = rhine_get_stats,
.ndo_set_multicast_list = rhine_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_do_ioctl = netdev_ioctl,
--
1.6.3.3
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2009-07-10 3:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-10 3:57 Ben Hutchings [this message]
2009-07-12 21:21 ` [PATCH 2/2] netdev: restore MTU change operation David Miller
-- strict thread matches above, loose matches on Subject: below --
2009-07-10 3:59 Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1247198254.21924.132.camel@deadeye \
--to=ben@decadent.org.uk \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).