From: "Eilon Greenstein" <eilong@broadcom.com>
To: "David Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Subject: [net-next 2/8] bnx2x: Allowing 0 as initial fairness value
Date: Wed, 14 Oct 2009 17:08:34 +0200 [thread overview]
Message-ID: <1255532914.25030.37.camel@lb-tlvb-eilong> (raw)
Value of zero was used to disable the fairness mechanism. Though the code
(driver and FW) allowed changing the value at run time, it did not allow to do
that if the mechanism was disabled to begin with.
Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
code to read the value from the chip at the right sequence.
Without this fix, if the initial value was set to zero, traffic could not run on
the interface.
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x_hsi.h | 4 +-
drivers/net/bnx2x_main.c | 56 +++++++++++++++++++++++-----------------------
firmware/Makefile | 2 +-
firmware/WHENCE | 4 +-
4 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 994743d..dc2f8ed 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1259,8 +1259,8 @@ struct host_func_stats {
#define BCM_5710_FW_MAJOR_VERSION 5
-#define BCM_5710_FW_MINOR_VERSION 0
-#define BCM_5710_FW_REVISION_VERSION 21
+#define BCM_5710_FW_MINOR_VERSION 2
+#define BCM_5710_FW_REVISION_VERSION 7
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index b4e9c6e..691cf15 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -2333,8 +2333,14 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp)
}
/* ... only if all min rates are zeros - disable fairness */
- if (all_zero)
- bp->vn_weight_sum = 0;
+ if (all_zero) {
+ bp->cmng.flags.cmng_enables &=
+ ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+ DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
+ " fairness will be disabled\n");
+ } else
+ bp->cmng.flags.cmng_enables |=
+ CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
}
static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func)
@@ -2353,17 +2359,14 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func)
} else {
vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
- /* If fairness is enabled (not all min rates are zeroes) and
- if current min rate is zero - set it to 1.
- This is a requirement of the algorithm. */
- if (bp->vn_weight_sum && (vn_min_rate == 0))
+ /* If min rate is zero - set it to 1 */
+ if (!vn_min_rate)
vn_min_rate = DEF_MIN_RATE;
vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
}
-
DP(NETIF_MSG_IFUP,
- "func %d: vn_min_rate=%d vn_max_rate=%d vn_weight_sum=%d\n",
+ "func %d: vn_min_rate %d vn_max_rate %d vn_weight_sum %d\n",
func, vn_min_rate, vn_max_rate, bp->vn_weight_sum);
memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
@@ -2490,7 +2493,6 @@ static void bnx2x__link_status_update(struct bnx2x *bp)
else
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
- bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
bnx2x_calc_vn_weight_sum(bp);
/* indicate link status */
@@ -2634,10 +2636,7 @@ static void bnx2x_update_min_max(struct bnx2x *bp)
static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
{
- int func = BP_FUNC(bp);
-
DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
- bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
@@ -3067,6 +3066,8 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
int func = BP_FUNC(bp);
REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+ bp->mf_config = SHMEM_RD(bp,
+ mf_cfg.func_mf_config[func].config);
val = SHMEM_RD(bp, func_mb[func].drv_status);
if (val & DRV_STATUS_DCC_EVENT_MASK)
bnx2x_dcc_event(bp,
@@ -5559,20 +5560,18 @@ static void bnx2x_init_internal_func(struct bnx2x *bp)
bp->link_vars.line_speed = SPEED_10000;
bnx2x_init_port_minmax(bp);
+ if (!BP_NOMCP(bp))
+ bp->mf_config =
+ SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
bnx2x_calc_vn_weight_sum(bp);
for (vn = VN_0; vn < E1HVN_MAX; vn++)
bnx2x_init_vn_minmax(bp, 2*vn + port);
/* Enable rate shaping and fairness */
- bp->cmng.flags.cmng_enables =
+ bp->cmng.flags.cmng_enables |=
CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
- if (bp->vn_weight_sum)
- bp->cmng.flags.cmng_enables |=
- CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
- else
- DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
- " fairness will be disabled\n");
+
} else {
/* rate shaping and fairness are disabled */
DP(NETIF_MSG_IFUP,
@@ -9038,17 +9037,18 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (netif_carrier_ok(dev)) {
cmd->speed = bp->link_vars.line_speed;
cmd->duplex = bp->link_vars.duplex;
- } else {
- cmd->speed = bp->link_params.req_line_speed;
- cmd->duplex = bp->link_params.req_duplex;
- }
- if (IS_E1HMF(bp)) {
- u16 vn_max_rate;
+ if (IS_E1HMF(bp)) {
+ u16 vn_max_rate;
- vn_max_rate = ((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
+ vn_max_rate =
+ ((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
- if (vn_max_rate < cmd->speed)
- cmd->speed = vn_max_rate;
+ if (vn_max_rate < cmd->speed)
+ cmd->speed = vn_max_rate;
+ }
+ } else {
+ cmd->speed = -1;
+ cmd->duplex = -1;
}
if (bp->link_params.switch_cfg == SWITCH_CFG_10G) {
diff --git a/firmware/Makefile b/firmware/Makefile
index a6c7c3e..45c0466 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,7 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.0.21.0.fw bnx2x-e1h-5.0.21.0.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.7.0.fw bnx2x-e1h-5.2.7.0.fw
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j3.fw \
bnx2/bnx2-rv2p-09-5.0.0.j3.fw \
bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index c437e14..a07aede 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -674,8 +674,8 @@ Found in hex form in kernel source.
Driver: bnx2x: Broadcom Everest
-File: bnx2x-e1-4.8.53.0.fw.ihex
-File: bnx2x-e1h-4.8.53.0.fw.ihex
+File: bnx2x-e1-5.2.7.0.fw.ihex
+File: bnx2x-e1h-5.2.7.0.fw.ihex
License:
Copyright (c) 2007-2009 Broadcom Corporation
--
1.5.4.3
next reply other threads:[~2009-10-14 15:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-14 15:08 Eilon Greenstein [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-10-15 6:48 [net-next 2/8] bnx2x: Allowing 0 as initial fairness value Eilon Greenstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1255532914.25030.37.camel@lb-tlvb-eilong \
--to=eilong@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox