From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andy@greyhouse.net
Subject: [PATCH 13/20] tg3: Add 50610M phy ID for 5785
Date: Mon, 2 Nov 2009 16:29:34 -0800 [thread overview]
Message-ID: <1257212003.22019@xw6200> (raw)
This patch adds the 50610M phy ID for 5785.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 2 ++
drivers/net/tg3.h | 1 +
2 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 7bebb47..0aecd07 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -940,6 +940,7 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
case TG3_PHY_ID_BCM50610:
+ case TG3_PHY_ID_BCM50610M:
val = MAC_PHYCFG2_50610_LED_MODES;
break;
case TG3_PHY_ID_BCMAC131:
@@ -1098,6 +1099,7 @@ static int tg3_mdio_init(struct tg3 *tp)
phydev->interface = PHY_INTERFACE_MODE_GMII;
break;
case TG3_PHY_ID_BCM50610:
+ case TG3_PHY_ID_BCM50610M:
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 9999345..d770da1 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2864,6 +2864,7 @@ struct tg3 {
#define PHY_REV_BCM5401_C0 0x6
#define PHY_REV_BCM5411_X0 0x1 /* Found on Netgear GA302T */
#define TG3_PHY_ID_BCM50610 0x143bd60
+#define TG3_PHY_ID_BCM50610M 0x143bd70
#define TG3_PHY_ID_BCMAC131 0x143bc70
#define TG3_PHY_ID_RTL8211C 0x001cc910
#define TG3_PHY_ID_RTL8201E 0x00008200
--
1.6.4.4
reply other threads:[~2009-11-03 1:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1257212003.22019@xw6200 \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).