From: "Yaniv Rosner" <yanivr@broadcom.com>
To: "David Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, eilong@broadcom.com
Subject: [net-next 05/10] bnx2x: Modify BCM8706 link init seq
Date: Thu, 5 Nov 2009 19:18:21 +0200 [thread overview]
Message-ID: <1257441501.3390.52.camel@lb-tlvb-yanivr.il.broadcom.com> (raw)
Modify BCM8706 link initialization sequence so that first it link up between
Serdes and BCM8706, and only then between BCM8706 to network
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x_link.c | 31 ++++++++++++++++++-------------
1 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 4c16a46..b08ff77 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1930,6 +1930,8 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
(XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
+ (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) {
vars->autoneg = AUTO_NEG_ENABLED;
@@ -3772,19 +3774,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
}
}
/* Force speed */
- /* First enable LASI */
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM_CTRL,
- 0x0400);
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_LASI_CTRL, 0x0004);
-
if (params->req_line_speed == SPEED_10000) {
DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");
@@ -3794,6 +3783,9 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
MDIO_PMA_DEVAD,
MDIO_PMA_REG_DIGITAL_CTRL,
0x400);
+ bnx2x_cl45_write(bp, params->port, ext_phy_type,
+ ext_phy_addr, MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LASI_CTRL, 1);
} else {
/* Force 1Gbps using autoneg with 1G
advertisment */
@@ -3835,6 +3827,17 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
MDIO_AN_DEVAD,
MDIO_AN_REG_CTRL,
0x1200);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM_CTRL,
+ 0x0400);
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LASI_CTRL, 0x0004);
}
bnx2x_save_bcm_spirom_ver(bp, params->port,
@@ -5952,6 +5955,7 @@ static u8 bnx2x_link_initialize(struct link_params *params,
if (non_ext_phy ||
(ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+ (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
(ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
(params->loopback_mode == LOOPBACK_EXT_PHY)) {
if (params->req_line_speed == SPEED_AUTO_NEG)
@@ -6421,6 +6425,7 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) &&
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) &&
(ext_phy_link_up && !vars->phy_link_up))
bnx2x_init_internal_phy(params, vars, 0);
--
1.6.5.2
reply other threads:[~2009-11-05 15:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1257441501.3390.52.camel@lb-tlvb-yanivr.il.broadcom.com \
--to=yanivr@broadcom.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox