From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Hutchings Subject: nf_conntrack sets wrong value for ctorigsrc parameter Date: Wed, 18 Nov 2009 07:39:18 +0000 Message-ID: <1258529958.2810.36.camel@localhost> Mime-Version: 1.0 Content-Type: multipart/signed; micalg="pgp-sha1"; protocol="application/pgp-signature"; boundary="=-VxYdEeDHZA7u2gnzmKQO" Cc: Michel Messerschmidt , 556587@bugs.debian.org To: netdev@vger.kernel.org Return-path: Received: from shadbolt.e.decadent.org.uk ([88.96.1.126]:56053 "EHLO shadbolt.e.decadent.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751661AbZKRHjU (ORCPT ); Wed, 18 Nov 2009 02:39:20 -0500 Sender: netdev-owner@vger.kernel.org List-ID: --=-VxYdEeDHZA7u2gnzmKQO Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable =46rom the Debian bug tracking system: -------- Forwarded Message -------- From: Michel Messerschmidt Reply-to: Michel Messerschmidt , 556587@bugs= .debian.org To: Debian Bug Tracking System Subject: Bug#556587: linux-image-2.6.31-1-686-bigmem: nf_conntrack sets wro= ng value for ctorigsrc parameter Date: Mon, 16 Nov 2009 23:09:10 +0100 Package: linux-2.6 Version: 2.6.31-2 Severity: normal My iptables script using the conntrack module does not work with this kerne= l=20 version anymore. The value of the ctorigsrc parameter is not set correctly: rei:~$ cat /etc/mm_iptables/mm_iptables_dmz | grep -E 'ctorig|LOCALIP=3D' LOCALIP=3D"192.168.40.3" $IPT -A in_dmz -p udp --dport 1024:65535 -m conntrack --ctproto udp= --ctorigsrc $LOCALIP --ctorigdstport 53 --ctreplsrcport 53 -j ACCEPT $IPT -A in_dmz -p udp --dport 1024:65535 -m conntrack --ctstate REL= ATED,ESTABLISHED --ctproto udp --ctorigsrc $LOCALIP -j ACCEPT rei:~$ iptables -nvL | grep ctorig 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0= /0 udp dpts:1024:65535 ctproto 17 ctorigsrc 192.60.154.245 ctorig= dstport 53 ctreplsrcport 53=20 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0= /0 udp dpts:1024:65535 ctstate RELATED,ESTABLISHED ctproto 17 cto= rigsrc 128.49.154.245=20 I see the same behavior with the 686 flavour (without bigmem). With older kernels up to 2.6.30-8, the ctorigsrc value was set as expected: rei:~$ iptables -nvL | grep ctorig 21 2452 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0= /0 udp dpts:1024:65535 ctproto 17 ctorigsrc 192.168.40.3 ctorigds= tport 53 ctreplsrcport 53=20 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0= /0 udp dpts:1024:65535 ctstate RELATED,ESTABLISHED ctproto 17 cto= rigsrc 192.168.40.3=20 -- Package-specific info: ** Version: Linux version 2.6.31-1-686-bigmem (Debian 2.6.31-2) (ben@decadent.org.uk) (= gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 15 21:22:56 UTC 2009 ** Command line: BOOT_IMAGE=3D/vmlinuz-2.6.31-1-686-bigmem root=3D/dev/mapper/sda2_crypt ro = vdso=3D1 ** Not tainted ** Kernel log: [ 252.421890] FW-DROP-DEFAULT IN=3Deth1 OUT=3D MAC=3D00:08:54:50:08:d8:00:= 16:38:aa:fd:00:08:00 SRC=3D217.237.150.205 DST=3D192.168.40.3 LEN=3D126 TOS= =3D0x00 PREC=3D0x00 TTL=3D60 ID=3D0 DF PROTO=3DUDP SPT=3D53 DPT=3D25586 LEN= =3D106=20 [ 252.425260] FW-DROP-DEFAULT IN=3Deth1 OUT=3D MAC=3D00:08:54:50:08:d8:00:= 16:38:aa:fd:00:08:00 SRC=3D217.237.149.142 DST=3D192.168.40.3 LEN=3D126 TOS= =3D0x00 PREC=3D0x00 TTL=3D59 ID=3D0 DF PROTO=3DUDP SPT=3D53 DPT=3D25586 LEN= =3D106=20 [ 252.425929] FW-DROP-DEFAULT IN=3Deth1 OUT=3D MAC=3D00:08:54:50:08:d8:00:= 16:38:aa:fd:00:08:00 SRC=3D217.237.150.205 DST=3D192.168.40.3 LEN=3D144 TOS= =3D0x00 PREC=3D0x00 TTL=3D60 ID=3D0 DF PROTO=3DUDP SPT=3D53 DPT=3D42698 LEN= =3D124=20 [ 252.429781] FW-DROP-DEFAULT IN=3Deth1 OUT=3D MAC=3D00:08:54:50:08:d8:00:= 16:38:aa:fd:00:08:00 SRC=3D217.237.149.142 DST=3D192.168.40.3 LEN=3D144 TOS= =3D0x00 PREC=3D0x00 TTL=3D59 ID=3D0 DF PROTO=3DUDP SPT=3D53 DPT=3D42698 LEN= =3D124=20 [...cut many repeated log messages...] ** Model information not available ** Loaded modules: Module Size Used by tun 13120 2=20 video 19856 0=20 output 2872 1 video ac 3124 0=20 battery 6348 0=20 acpi_cpufreq 8104 0=20 cpufreq_userspace 2944 0=20 cpufreq_conservative 6780 0=20 cpufreq_powersave 1408 0=20 cpufreq_stats 3868 0=20 nfsd 223620 9=20 exportfs 4016 1 nfsd nfs 252000 0=20 lockd 64696 2 nfsd,nfs fscache 36696 1 nfs nfs_acl 2860 2 nfsd,nfs auth_rpcgss 34388 2 nfsd,nfs sunrpc 181096 10 nfsd,nfs,lockd,nfs_acl,auth_rpcgss ipt_MASQUERADE 2400 1=20 iptable_nat 5596 1=20 xt_TCPMSS 3604 1=20 xt_conntrack 4028 36=20 xt_tcpudp 2716 195=20 ip6t_LOG 4864 1=20 ipt_LOG 4784 39=20 ip6table_filter 3312 1=20 ip6_tables 12000 2 ip6t_LOG,ip6table_filter iptable_filter 3240 1=20 nf_nat 17316 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ftp 6592 0=20 nf_conntrack_ipv4 13120 39 iptable_nat,nf_nat nf_conntrack 64156 6 ipt_MASQUERADE,iptable_nat,xt_conntrack,nf_= nat,nf_conntrack_ftp,nf_conntrack_ipv4 nf_defrag_ipv4 1808 1 nf_conntrack_ipv4 ip_tables 10764 2 iptable_nat,iptable_filter x_tables 16084 9 ipt_MASQUERADE,iptable_nat,xt_TCPMSS,xt_con= ntrack,xt_tcpudp,ip6t_LOG,ipt_LOG,ip6_tables,ip_tables fuse 58196 1=20 ext2 58996 1=20 hwmon_vid 2576 0=20 eeprom 5184 0=20 firewire_sbp2 14016 0=20 loop 14268 0=20 snd_ca0106 32032 0=20 snd_rawmidi 20452 1 snd_ca0106 snd_seq_device 6780 1 snd_rawmidi snd_ac97_codec 99668 1 snd_ca0106 snd_pcsp 9540 0=20 ac97_bus 1628 1 snd_ac97_codec i2c_i801 8952 0=20 snd_pcm 70136 3 snd_ca0106,snd_ac97_codec,snd_pcsp snd_timer 19000 1 snd_pcm i2c_core 21744 2 eeprom,i2c_i801 rng_core 3996 0=20 snd 54440 7 snd_ca0106,snd_rawmidi,snd_seq_device,snd_a= c97_codec,snd_pcsp,snd_pcm,snd_timer soundcore 6844 1 snd snd_page_alloc 8716 2 snd_ca0106,snd_pcm evdev 8832 3=20 button 5488 0=20 processor 36772 1 acpi_cpufreq ext4 284896 8=20 mbcache 7488 2 ext2,ext4 jbd2 73892 1 ext4 crc16 1840 1 ext4 cbc 3352 9=20 dm_crypt 12340 9=20 dm_mod 65432 40 dm_crypt sd_mod 31840 7=20 crc_t10dif 1716 1 sd_mod ide_pci_generic 3784 0=20 ide_core 97736 1 ide_pci_generic ata_generic 4500 0=20 ahci 33412 0=20 ata_piix 21532 5=20 uhci_hcd 20568 0=20 libata 163228 3 ata_generic,ahci,ata_piix firewire_ohci 20740 0=20 firewire_core 45276 2 firewire_sbp2,firewire_ohci crc_itu_t 1892 1 firewire_core r8169 30624 0=20 mii 5048 1 r8169 ehci_hcd 32868 0=20 scsi_mod 143036 3 firewire_sbp2,sd_mod,libata tg3 97292 0=20 libphy 23160 1 tg3 usbcore 141496 4 uhci_hcd,ehci_hcd nls_base 7188 1 usbcore intel_agp 25752 1=20 agpgart 33112 1 intel_agp thermal 13720 0=20 fan 4460 0=20 thermal_sys 14396 4 video,processor,thermal,fan aes_i586 8312 18=20 aes_generic 27640 1 aes_i586 sha256_generic 11492 0=20 ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback post-up /etc/mm_iptables/mm_iptables_init start # The primary network interface # really use hotplug ??? #allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.42.3 netmask 255.255.255.0 broadcast 192.168.42.255 # gateway must not be set here to allow dialup connections #gateway 192.168.42.3 # hardware address (MAC) # hwaddress ether=20 # set MTU for ethernet only network mtu 1500 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.42.3 dns-search matrix # handle firewall rules for this interface post-up /etc/mm_iptables/mm_iptables_localnet start pre-down /etc/mm_iptables/mm_iptables_localnet stop || true auto eth1 iface eth1 inet static address 192.168.40.3 netmask 255.255.255.0 broadcast 192.168.40.255 # gateway must not be set here to allow dialup connections gateway 192.168.40.1 # hardware address (MAC) # hwaddress ether=20 # set MTU for dialup / dsl / internet mtu 1492 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.42.3 dns-search home # handle firewall rules for this interface post-up /etc/mm_iptables/mm_iptables_dmz start pre-down /etc/mm_iptables/mm_iptables_dmz stop || true ** Network status: *** IP interfaces and addresses: 1: lo: mtu 16436 qdisc noqueue state UNKNOWN=20 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host=20 valid_lft forever preferred_lft forever 2: eth1: mtu 1492 qdisc pfifo_fast state = UNKNOWN qlen 1000 link/ether 00:08:54:50:08:d8 brd ff:ff:ff:ff:ff:ff inet 192.168.40.3/24 brd 192.168.40.255 scope global eth1 inet6 fe80::208:54ff:fe50:8d8/64 scope link=20 valid_lft forever preferred_lft forever 3: eth0: mtu 1500 qdisc pfifo_fast state = UP qlen 1000 link/ether 00:30:1b:ba:73:70 brd ff:ff:ff:ff:ff:ff inet 192.168.42.3/24 brd 192.168.42.255 scope global eth0 inet6 fe80::230:1bff:feba:7370/64 scope link=20 valid_lft forever preferred_lft forever 4: tun0: mtu 1500 qdisc pfifo_fas= t state UNKNOWN qlen 100 link/[65534]=20 inet 10.1.41.3 peer 10.1.41.10/32 scope global tun0 *** Device statistics: Inter-| Receive | Transmi= t face |bytes packets errs drop fifo frame compressed multicast|bytes = packets errs drop fifo colls carrier compressed lo: 18976 258 0 0 0 0 0 0 18976 = 258 0 0 0 0 0 0 eth1: 48518 332 0 0 0 0 0 0 30390 = 378 0 0 0 0 0 0 eth0: 84454 855 0 0 0 0 0 0 115085 = 537 0 0 0 0 0 0 tun0: 0 0 0 0 0 0 0 0 0 = 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 1475 total packets received 70 forwarded 0 incoming packets discarded 1105 incoming packets delivered 1146 requests sent out Icmp: 1 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 1 1 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 1 IcmpMsg: InType3: 1 OutType3: 1 Tcp: 4 active connections openings 2 passive connection openings 4 failed connection attempts 0 connection resets received 2 connections established 727 segments received 452 segments send out 0 segments retransmited 0 bad segments received. 9 resets sent Udp: 377 packets received 1 packets to unknown port received. 0 packet receive errors 627 packets sent UdpLite: TcpExt: 4 delayed acks sent 4 packets directly queued to recvmsg prequeue. 230 packet headers predicted 45 acknowledgments not containing data payload received 376 predicted acknowledgments IpExt: InBcastPkts: 48 OutBcastPkts: 48 InOctets: 136879 OutOctets: 148461 InBcastOctets: 5833 OutBcastOctets: 5833 *** Device features: eth0: 0x109a3 eth1: 0x180 lo: 0x13865 tun0: 0x0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Ex= press Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GM= S/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA = controller]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- [disabled] Capabilities: 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GM= L Express Graphics Controller [8086:2792] (rev 04) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fa= mily) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport-driver 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fa= mily) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH= 6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:= 2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface= Bridge [8086:2641] (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)= SMBus Controller [8086:266a] (rev 04) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- [disabled] Capabilities: Kernel driver in use: tg3 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111= /8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigab= it Ethernet controller [10ec:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- Kernel driver in use: r8169 03:09.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblast= er [1102:0007] Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3041] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- Kernel driver in use: CA0106 03:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II = IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI= ]) Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer= Controller [1106:3044] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- Kernel driver in use: firewire_ohci ** USB devices: Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 04e6:5115 SCM Microsystems, Inc. SCR335 SmartCard Re= ader Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'ex= perimental') Architecture: i386 (i686) Kernel: Linux 2.6.31-1-686-bigmem (SMP w/1 CPU core) Locale: LANG=3Dde_DE.UTF-8, LC_CTYPE=3Dde_DE.UTF-8 (charmap=3DUTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.31-1-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration managemen= t sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initra= mfs ii module-init-tools 3.11-1 tools for managing Linux kerne= l mo Versions of packages linux-image-2.6.31-1-686-bigmem recommends: ii firmware-linux-free 2.6.31-2 Binary firmware for various dr= iver ii libc6-i686 2.10.1-7 GNU C Library: Shared librarie= s [i Versions of packages linux-image-2.6.31-1-686-bigmem suggests: ii grub 0.97-59 GRand Unified Bootloader (dumm= y pa pn linux-doc-2.6.31 (no description available) Versions of packages linux-image-2.6.31-1-686-bigmem is related to: pn firmware-bnx2 (no description available) pn firmware-bnx2x (no description available) pn firmware-ipw2x00 (no description available) pn firmware-ivtv (no description available) pn firmware-iwlwifi (no description available) ii firmware-linux 0.18 Binary firmware for various dr= iver pn firmware-linux-nonfree (no description available) pn firmware-qlogic (no description available) pn firmware-ralink (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.31-1-686-bigmem/postinst/bootloader-error-2.6.31-1-686-bi= gmem: linux-image-2.6.31-1-686-bigmem/postinst/depmod-error-initrd-2.6.31-1-686= -bigmem: false linux-image-2.6.31-1-686-bigmem/prerm/removing-running-kernel-2.6.31-1-68= 6-bigmem: true linux-image-2.6.31-1-686-bigmem/postinst/bootloader-test-error-2.6.31-1-6= 86-bigmem: linux-image-2.6.31-1-686-bigmem/postinst/missing-firmware-2.6.31-1-686-bi= gmem: linux-image-2.6.31-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.31= -1-686-bigmem: true -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'ex= perimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core) Locale: LANG=3Dde_DE.UTF-8, LC_CTYPE=3Dde_DE.UTF-8 (charmap=3DUTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.31-1-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration managemen= t sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initra= mfs ii module-init-tools 3.11-1 tools for managing Linux kerne= l mo Versions of packages linux-image-2.6.31-1-686-bigmem recommends: ii firmware-linux-free 2.6.31-2 Binary firmware for various dr= iver ii libc6-i686 2.10.1-7 GNU C Library: Shared librarie= s [i Versions of packages linux-image-2.6.31-1-686-bigmem suggests: ii grub 0.97-59 GRand Unified Bootloader (dumm= y pa pn linux-doc-2.6.31 (no description available) Versions of packages linux-image-2.6.31-1-686-bigmem is related to: pn firmware-bnx2 (no description available) pn firmware-bnx2x (no description available) pn firmware-ipw2x00 (no description available) pn firmware-ivtv (no description available) pn firmware-iwlwifi (no description available) ii firmware-linux 0.18 Binary firmware for various dr= iver pn firmware-linux-nonfree (no description available) pn firmware-qlogic (no description available) pn firmware-ralink (no description available) --=-VxYdEeDHZA7u2gnzmKQO Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIVAwUASwOkoOe/yOyVhhEJAQLDNQ//aVlSwuDqZS+eSMldG4SYuf3O8H7OaLrc ffNuU5htpnJKxlADahgMh2w2TOMUgUf4hZ9KrZN9/3Aztbmis0/jd1BwGu3fvK4v cvinSJnj7wS6y3orVTgU+84Nf7DPOxbQJcUlZU3CbMil2kbu9INkn4hOOB7Gjxlz La0eXGcE7rJXTxQvjoKQDpn8lWOYhe9xkgrCJ5m/eTuLtBTvPOSVecIwdflst32k 5CTUF4utb5l+TU5FyZ4WofTdkIaDntmgLulcvQR2JA8imeUTbsC+DpOaKOcVNdp+ SWRd36jo7xmBSAeGEbqJ8Fli9n6dy0eDKcQrV5h6ytUUk9rlEioKdw1ZedI7x2E2 M6Og/3UjtRQZnoGDNJigyEuOymxztcVR5Pp8G/fD1HL8J/08cjo0ZSXyvEHERzvS vMniAhazU7k5PQWCBCCrsw3jOdzEwiFxE/hkAp8YWsdaKw/gL6bMZVue++r/EHfT rh4wZVTT75RBs2GwFNNohwfvlYZUE3gx6o1PF/4Q/ug2WnVR1qsODmRSoBsmFCxe nK0XZvRkGEHc8F8K4j93vpvo2NN2GrN1B05eAFb3yo9wZpdhmvKkmtmOSvQfL6mD 4C4Ls7Ve3xWiuzWk4VEvqHoMnxghF7hiweFIz5PkU60npSuqdg2YcbBcye8FF16f 6f3d3kjsvo4= =GZhS -----END PGP SIGNATURE----- --=-VxYdEeDHZA7u2gnzmKQO--