From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 25/32] sfc: Fold falcon_probe_nic_variant() into falcon_probe_nic()
Date: Sat, 28 Nov 2009 03:51:19 +0000 [thread overview]
Message-ID: <1259380279.2811.56.camel@achroite.uk.solarflarecom.com> (raw)
falcon_probe_nic_variant() does a lot less than it used to, and a
lot less than it claims to. Fold the remainder into its caller.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
drivers/net/sfc/falcon.c | 64 +++++++++++++++++----------------------------
1 files changed, 24 insertions(+), 40 deletions(-)
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 9eb3bfb..dbd0d62 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -2806,40 +2806,6 @@ u32 efx_nic_fpga_ver(struct efx_nic *efx)
return EFX_OWORD_FIELD(altera_build, FRF_AZ_ALTERA_BUILD_VER);
}
-/* Probe the NIC variant (revision, ASIC vs FPGA, function count, port
- * count, port speed). Set workaround and feature flags accordingly.
- */
-static int falcon_probe_nic_variant(struct efx_nic *efx)
-{
- efx_oword_t nic_stat;
-
- if (efx_nic_fpga_ver(efx) != 0) {
- EFX_ERR(efx, "Falcon FPGA not supported\n");
- return -ENODEV;
- }
-
- efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
-
- if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) {
- u8 pci_rev = efx->pci_dev->revision;
-
- if ((pci_rev == 0xff) || (pci_rev == 0)) {
- EFX_ERR(efx, "Falcon rev A0 not supported\n");
- return -ENODEV;
- }
- if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) {
- EFX_ERR(efx, "Falcon rev A1 1G not supported\n");
- return -ENODEV;
- }
- if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) {
- EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n");
- return -ENODEV;
- }
- }
-
- return 0;
-}
-
/* Probe all SPI devices on the NIC */
static void falcon_probe_spi_devices(struct efx_nic *efx)
{
@@ -2891,15 +2857,33 @@ static int falcon_probe_nic(struct efx_nic *efx)
return -ENOMEM;
efx->nic_data = nic_data;
- /* Determine number of ports etc. */
- rc = falcon_probe_nic_variant(efx);
- if (rc)
+ rc = -ENODEV;
+
+ if (efx_nic_fpga_ver(efx) != 0) {
+ EFX_ERR(efx, "Falcon FPGA not supported\n");
goto fail1;
+ }
+
+ if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) {
+ efx_oword_t nic_stat;
+ struct pci_dev *dev;
+ u8 pci_rev = efx->pci_dev->revision;
- /* Probe secondary function if expected */
- if (efx_nic_is_dual_func(efx)) {
- struct pci_dev *dev = pci_dev_get(efx->pci_dev);
+ if ((pci_rev == 0xff) || (pci_rev == 0)) {
+ EFX_ERR(efx, "Falcon rev A0 not supported\n");
+ goto fail1;
+ }
+ efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
+ if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) {
+ EFX_ERR(efx, "Falcon rev A1 1G not supported\n");
+ goto fail1;
+ }
+ if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) {
+ EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n");
+ goto fail1;
+ }
+ dev = pci_dev_get(efx->pci_dev);
while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID,
dev))) {
if (dev->bus == efx->pci_dev->bus &&
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
reply other threads:[~2009-11-28 3:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259380279.2811.56.camel@achroite.uk.solarflarecom.com \
--to=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox