From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 03/12] sfc: Turn pause frame generation on and off at the MAC, not the RX FIFO
Date: Sun, 29 Nov 2009 13:42:18 +0000 [thread overview]
Message-ID: <1259502138.3709.42.camel@localhost> (raw)
Pause frame generation is gated by both RX_XOFF_MAC_EN and an enable
bit in each MAC. RX_XOFF_MAC_EN bit always reads back as 0 so we need
to set it correctly every time we modify RX_CFG_REG. Simplify this by
always setting it to 1 and only changing the enable bits in the MACs.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
drivers/net/sfc/falcon.c | 13 ++++++-------
drivers/net/sfc/falcon_xmac.c | 3 ++-
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 08f540f..040f553 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1939,7 +1939,6 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx)
struct efx_link_state *link_state = &efx->link_state;
efx_oword_t reg;
int link_speed;
- bool tx_fc;
switch (link_state->speed) {
case 10000: link_speed = 3; break;
@@ -1969,13 +1968,10 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx)
/* Restore the multicast hash registers. */
falcon_push_multicast_hash(efx);
- /* Transmission of pause frames when RX crosses the threshold is
- * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL.
- * Action on receipt of pause frames is controller by XM_DIS_FCNTL */
- tx_fc = !!(efx->link_state.fc & EFX_FC_TX);
efx_reado(efx, ®, FR_AZ_RX_CFG);
- EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, tx_fc);
-
+ /* Enable XOFF signal from RX FIFO (we enabled it during NIC
+ * initialisation but it may read back as 0) */
+ EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1);
/* Unisolate the MAC -> RX */
if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1);
@@ -3000,6 +2996,9 @@ static void falcon_init_rx_cfg(struct efx_nic *efx)
EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr);
EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1);
}
+ /* Always enable XOFF signal from RX FIFO. We enable
+ * or disable transmission of pause frames at the MAC. */
+ EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1);
efx_writeo(efx, ®, FR_AZ_RX_CFG);
}
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 1523efd..60dc097 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -148,6 +148,7 @@ static void falcon_reconfigure_xmac_core(struct efx_nic *efx)
unsigned int max_frame_len;
efx_oword_t reg;
bool rx_fc = !!(efx->link_state.fc & EFX_FC_RX);
+ bool tx_fc = !!(efx->link_state.fc & EFX_FC_TX);
/* Configure MAC - cut-thru mode is hard wired on */
EFX_POPULATE_OWORD_3(reg,
@@ -162,7 +163,7 @@ static void falcon_reconfigure_xmac_core(struct efx_nic *efx)
FRF_AB_XM_TX_PRMBL, 1,
FRF_AB_XM_AUTO_PAD, 1,
FRF_AB_XM_TXCRC, 1,
- FRF_AB_XM_FCNTL, 1,
+ FRF_AB_XM_FCNTL, tx_fc,
FRF_AB_XM_IPG, 0x3);
efx_writeo(efx, ®, FR_AB_XM_TX_CFG);
--
1.6.5.3
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next reply other threads:[~2009-11-29 13:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-29 13:42 Ben Hutchings [this message]
2009-11-30 0:47 ` [PATCH 03/12] sfc: Turn pause frame generation on and off at the MAC, not the RX FIFO David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259502138.3709.42.camel@localhost \
--to=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).