From: jamal <hadi@cyberus.ca>
To: David Miller <davem@davemloft.net>
Cc: ja@ssi.bg, hidden@balabit.hu, kaber@trash.net, hidden@sch.bme.hu,
aschultz@warp10.net, tproxy@lists.balabit.hu,
netdev@vger.kernel.org, rick.jones2@hp.com
Subject: Re: [PATCH] net: restore ip source validation WAS(Re: [tproxy,regression] tproxy broken in 2.6.32
Date: Mon, 14 Dec 2009 05:19:45 -0500 [thread overview]
Message-ID: <1260785985.6167.29.camel@bigi> (raw)
In-Reply-To: <20091213.191024.193699730.davem@davemloft.net>
[-- Attachment #1: Type: text/plain, Size: 311 bytes --]
On Sun, 2009-12-13 at 19:10 -0800, David Miller wrote:
> Don't use binary attachments like that please.
>
> It doesn't end up in patchwork properly, and I need that to
> happen in order to track people's work effectively.
That was me venturing into git-land. This is how i normally send them:
cheers,
jamal
[-- Attachment #2: src-valid-m3-1 --]
[-- Type: text/plain, Size: 2821 bytes --]
commit 2a69541430da1a888605e6092f5b35a76efd8475
Author: Jamal Hadi Salim <hadi@cyberus.ca>
Date: Sun Dec 13 14:02:46 2009 -0500
[PATCH] net: restore ip source validation
when using policy routing and the skb mark:
there are cases where a back path validation requires us
to use a different routing table for src ip validation than
the one used for mapping ingress dst ip.
One such a case is transparent proxying where we pretend to be
the destination system and therefore the local table
is used for incoming packets but possibly a main table would
be used on outbound.
Make the default behavior to allow the above and if users
need to turn on the symmetry via sysctl src_valid_mark
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 699e85c..b230492 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -81,6 +81,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
#define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING)
#define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
#define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER)
+#define IN_DEV_SRC_VMARK(in_dev) IN_DEV_ORCONF((in_dev), SRC_VMARK)
#define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \
ACCEPT_SOURCE_ROUTE)
#define IN_DEV_ACCEPT_LOCAL(in_dev) IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL)
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 877ba03..bd27fbc 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -482,6 +482,7 @@ enum
NET_IPV4_CONF_ARP_ACCEPT=21,
NET_IPV4_CONF_ARP_NOTIFY=22,
NET_IPV4_CONF_ACCEPT_LOCAL=23,
+ NET_IPV4_CONF_SRC_VMARK=24,
__NET_IPV4_CONF_MAX
};
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 5cdbc10..040c4f0 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1397,6 +1397,7 @@ static struct devinet_sysctl_table {
DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE,
"accept_source_route"),
DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"),
+ DEVINET_SYSCTL_RW_ENTRY(SRC_VMARK, "src_valid_mark"),
DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"),
DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"),
DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"),
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 3323168..82dbf71 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -252,6 +252,8 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
no_addr = in_dev->ifa_list == NULL;
rpf = IN_DEV_RPFILTER(in_dev);
accept_local = IN_DEV_ACCEPT_LOCAL(in_dev);
+ if (mark && !IN_DEV_SRC_VMARK(in_dev))
+ fl.mark = 0;
}
rcu_read_unlock();
next prev parent reply other threads:[~2009-12-14 10:19 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <db81a9a20911230443h443b3c2l8fab5aef7b09cfa@mail.gmail.com>
[not found] ` <1259137434.9191.3.camel@nienna.balabit>
2009-11-26 17:19 ` [tproxy,regression] tproxy broken in 2.6.32 Andreas Schultz
2009-11-27 8:26 ` KOVACS Krisztian
2009-11-27 9:11 ` Andreas Schultz
2009-11-27 16:05 ` jamal
2009-11-28 15:15 ` KOVACS Krisztian
2009-11-28 15:45 ` jamal
2009-11-28 18:50 ` KOVACS Krisztian
2009-11-28 19:26 ` jamal
2009-11-28 15:46 ` Patrick McHardy
2009-11-28 16:04 ` jamal
2009-11-28 17:07 ` Patrick McHardy
2009-11-28 17:36 ` jamal
2009-11-28 19:05 ` KOVACS Krisztian
2009-11-28 19:44 ` jamal
2009-11-28 21:21 ` David Miller
2009-11-28 22:20 ` jamal
2009-11-29 20:35 ` KOVACS Krisztian
2009-11-30 12:15 ` jamal
2009-11-30 12:45 ` KOVACS Krisztian
2009-11-30 13:59 ` jamal
2009-12-01 13:34 ` jamal
2009-12-03 6:31 ` David Miller
2009-12-03 13:53 ` jamal
2009-12-03 13:55 ` Patrick McHardy
2009-12-03 14:07 ` KOVACS Krisztian
2009-12-03 14:29 ` jamal
2009-12-13 16:52 ` [PATCH] net: restore ip source validation WAS(Re: " jamal
2009-12-13 18:12 ` Julian Anastasov
2009-12-13 18:38 ` jamal
2009-12-13 19:11 ` jamal
2009-12-13 19:15 ` jamal
2009-12-14 3:10 ` David Miller
2009-12-14 10:19 ` jamal [this message]
2009-12-26 1:30 ` David Miller
2009-12-26 15:05 ` jamal
2009-12-26 21:45 ` David Miller
2009-11-30 20:17 ` David Miller
2009-11-28 21:22 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1260785985.6167.29.camel@bigi \
--to=hadi@cyberus.ca \
--cc=aschultz@warp10.net \
--cc=davem@davemloft.net \
--cc=hidden@balabit.hu \
--cc=hidden@sch.bme.hu \
--cc=ja@ssi.bg \
--cc=kaber@trash.net \
--cc=netdev@vger.kernel.org \
--cc=rick.jones2@hp.com \
--cc=tproxy@lists.balabit.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).