[PATCH 4/5] temac: dma MMIO for Virtex4

[gfilip@ee.ethz.ch]

This patch belongs to a set of patches which extends the temac driver to support Virtex4-FX. It was successfully tested on the ML403 evaluation board.

Signed-off-by: Filip Gospodinov <gfilip@ee.ethz.ch>
---
 drivers/net/ll_temac_main.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 2e7421c..8b4e1b9 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -115,6 +115,17 @@ void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
 	temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
 }
 
+#ifdef CONFIG_XILINX_VIRTEX_4_FX
+static u32 temac_dma_in32(struct temac_local *lp, int reg)
+{
+	return in_be32((u32 *)(lp->dma_regs + reg));
+}
+
+static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
+{
+	out_be32((u32 *)(lp->dma_regs + reg), value);
+}
+#else
 static u32 temac_dma_in32(struct temac_local *lp, int reg)
 {
 	return dcr_read(lp->sdma_dcrs, reg);
@@ -124,6 +135,7 @@ static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
 {
 	dcr_write(lp->sdma_dcrs, reg, value);
 }
+#endif
 
 /**
  * temac_dma_bd_init - Setup buffer descriptor rings
-- 
1.6.4.4