From: Eric Dumazet <eric.dumazet@gmail.com>
To: Oleg Nesterov <oleg@redhat.com>, David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>,
Francois Romieu <romieu@fr.zoreil.com>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
netdev@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH] r8169: Fix rtl8169_rx_interrupt()
Date: Tue, 16 Mar 2010 01:33:22 +0100 [thread overview]
Message-ID: <1268699602.2824.14.camel@edumazet-laptop> (raw)
In-Reply-To: <1268686865.2824.4.camel@edumazet-laptop>
Le lundi 15 mars 2010 à 22:01 +0100, Eric Dumazet a écrit :
> Yes, this is wrong. In this context (process context, not softirq), we
> should use netif_rx() or just drop frames if we are in reset phase.
>
Sergey,
Here is a compiled but untested patch (I dont have the hardware), could
you please test it ?
Thanks
[PATCH] r8169: Fix rtl8169_rx_interrupt()
In case a reset is performed, rtl8169_rx_interrupt() is called from
process context instead of softirq context. Special care must be taken
to call appropriate network core services (netif_rx() instead of
netif_receive_skb()). VLAN handling also corrected.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Diagnosed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 9d3ebf3..d873639 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1038,14 +1038,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev,
}
static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
- struct sk_buff *skb)
+ struct sk_buff *skb, int polling)
{
u32 opts2 = le32_to_cpu(desc->opts2);
struct vlan_group *vlgrp = tp->vlgrp;
int ret;
if (vlgrp && (opts2 & RxVlanTag)) {
- vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
+ __vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling);
ret = 0;
} else
ret = -1;
@@ -1062,7 +1062,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
}
static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
- struct sk_buff *skb)
+ struct sk_buff *skb, int polling)
{
return -1;
}
@@ -4429,12 +4429,20 @@ out:
return done;
}
+/*
+ * Warning : rtl8169_rx_interrupt() might be called :
+ * 1) from NAPI (softirq) context
+ * (polling = 1 : we should call netif_receive_skb())
+ * 2) from process context (rtl8169_reset_task())
+ * (polling = 0 : we must call netif_rx() instead)
+ */
static int rtl8169_rx_interrupt(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr, u32 budget)
{
unsigned int cur_rx, rx_left;
unsigned int delta, count;
+ int polling = (budget != ~(u32)0) ? 1 : 0;
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
@@ -4496,8 +4504,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
skb_put(skb, pkt_size);
skb->protocol = eth_type_trans(skb, dev);
- if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
- netif_receive_skb(skb);
+ if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) {
+ if (likely(polling))
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
+ }
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
next prev parent reply other threads:[~2010-03-16 0:33 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100307192305.GA598@elte.hu>
2010-03-08 12:51 ` inconsistent lock state Oleg Nesterov
2010-03-15 21:01 ` Eric Dumazet
2010-03-15 21:09 ` David Miller
2010-03-16 0:33 ` Eric Dumazet [this message]
2010-03-16 6:50 ` [PATCH] r8169: Fix rtl8169_rx_interrupt() Sergey Senozhatsky
2010-03-16 7:12 ` Eric Dumazet
2010-03-16 14:50 ` Sergey Senozhatsky
2010-03-16 15:00 ` Sergey Senozhatsky
2010-03-16 15:05 ` Eric Dumazet
2010-03-16 15:10 ` Sergey Senozhatsky
2010-03-16 15:20 ` Eric Dumazet
2010-03-16 18:26 ` Sergey Senozhatsky
2010-03-16 18:48 ` Eric Dumazet
2010-03-16 19:02 ` Sergey Senozhatsky
2010-03-17 7:25 ` Sergey Senozhatsky
2010-03-17 7:37 ` Eric Dumazet
2010-03-17 7:58 ` Sergey Senozhatsky
2010-03-17 10:58 ` Sergey Senozhatsky
2010-03-17 13:54 ` Eric Dumazet
2010-03-18 12:28 ` Sergey Senozhatsky
2010-03-17 23:55 ` Francois Romieu
2010-03-18 12:32 ` Sergey Senozhatsky
2010-03-18 13:31 ` Sergey Senozhatsky
2010-03-25 11:30 ` Sergey Senozhatsky
2010-03-25 13:19 ` Eric Dumazet
2010-03-25 13:48 ` Sergey Senozhatsky
2010-03-26 20:29 ` François Romieu
2010-03-31 12:08 ` Eric Dumazet
2010-04-02 1:43 ` David Miller
2010-04-02 13:51 ` Eric Dumazet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1268699602.2824.14.camel@edumazet-laptop \
--to=eric.dumazet@gmail.com \
--cc=a.p.zijlstra@chello.nl \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=netdev@vger.kernel.org \
--cc=oleg@redhat.com \
--cc=romieu@fr.zoreil.com \
--cc=sergey.senozhatsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox