From: Amit Kumar Salecha <amit.salecha@qlogic.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, ameen.rahman@qlogic.com,
Rajesh K Borundia <rajesh.borundia@qlogic.com>
Subject: [PATCH NEXT 3/5] netxen: validate unified romimage
Date: Mon, 29 Mar 2010 05:43:43 -0700 [thread overview]
Message-ID: <1269866625-26151-4-git-send-email-amit.salecha@qlogic.com> (raw)
In-Reply-To: <1269866625-26151-1-git-send-email-amit.salecha@qlogic.com>
From: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Validate all sections of unified romimage, before accessing them,
to avoid seg fault.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
---
drivers/net/netxen/netxen_nic.h | 1 -
drivers/net/netxen/netxen_nic_init.c | 154 ++++++++++++++++++++++++++++++---
2 files changed, 140 insertions(+), 15 deletions(-)
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 144d2e8..33ae5e1 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -420,7 +420,6 @@ struct status_desc {
} __attribute__ ((aligned(16)));
/* UNIFIED ROMIMAGE *************************/
-#define NX_UNI_FW_MIN_SIZE 0xc8000
#define NX_UNI_DIR_SECT_PRODUCT_TBL 0x0
#define NX_UNI_DIR_SECT_BOOTLD 0x6
#define NX_UNI_DIR_SECT_FW 0x7
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 1c63610..141bc43 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -613,22 +613,123 @@ static struct uni_table_desc *nx_get_table_desc(const u8 *unirom, int section)
return NULL;
}
+#define QLCNIC_FILEHEADER_SIZE (14 * 4)
+
static int
-nx_set_product_offs(struct netxen_adapter *adapter)
-{
- struct uni_table_desc *ptab_descr;
+netxen_nic_validate_header(struct netxen_adapter *adapter)
+ {
const u8 *unirom = adapter->fw->data;
- uint32_t i;
+ struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+ u32 fw_file_size = adapter->fw->size;
+ u32 tab_size;
__le32 entries;
+ __le32 entry_size;
+
+ if (fw_file_size < QLCNIC_FILEHEADER_SIZE)
+ return -EINVAL;
+
+ entries = cpu_to_le32(directory->num_entries);
+ entry_size = cpu_to_le32(directory->entry_size);
+ tab_size = cpu_to_le32(directory->findex) + (entries * entry_size);
+
+ if (fw_file_size < tab_size)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int
+netxen_nic_validate_bootld(struct netxen_adapter *adapter)
+{
+ struct uni_table_desc *tab_desc;
+ struct uni_data_desc *descr;
+ const u8 *unirom = adapter->fw->data;
+ __le32 idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+ NX_UNI_BOOTLD_IDX_OFF));
+ u32 offs;
+ u32 tab_size;
+ u32 data_size;
+
+ tab_desc = nx_get_table_desc(unirom, NX_UNI_DIR_SECT_BOOTLD);
+
+ if (!tab_desc)
+ return -EINVAL;
+ tab_size = cpu_to_le32(tab_desc->findex) +
+ (cpu_to_le32(tab_desc->entry_size) * (idx + 1));
+
+ if (adapter->fw->size < tab_size)
+ return -EINVAL;
+
+ offs = cpu_to_le32(tab_desc->findex) +
+ (cpu_to_le32(tab_desc->entry_size) * (idx));
+ descr = (struct uni_data_desc *)&unirom[offs];
+
+ data_size = cpu_to_le32(descr->findex) + cpu_to_le32(descr->size);
+
+ if (adapter->fw->size < data_size)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int
+netxen_nic_validate_fw(struct netxen_adapter *adapter)
+{
+ struct uni_table_desc *tab_desc;
+ struct uni_data_desc *descr;
+ const u8 *unirom = adapter->fw->data;
+ __le32 idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+ NX_UNI_FIRMWARE_IDX_OFF));
+ u32 offs;
+ u32 tab_size;
+ u32 data_size;
+
+ tab_desc = nx_get_table_desc(unirom, NX_UNI_DIR_SECT_FW);
+
+ if (!tab_desc)
+ return -EINVAL;
+
+ tab_size = cpu_to_le32(tab_desc->findex) +
+ (cpu_to_le32(tab_desc->entry_size) * (idx + 1));
+
+ if (adapter->fw->size < tab_size)
+ return -EINVAL;
+
+ offs = cpu_to_le32(tab_desc->findex) +
+ (cpu_to_le32(tab_desc->entry_size) * (idx));
+ descr = (struct uni_data_desc *)&unirom[offs];
+ data_size = cpu_to_le32(descr->findex) + cpu_to_le32(descr->size);
+
+ if (adapter->fw->size < data_size)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static int
+netxen_nic_validate_product_offs(struct netxen_adapter *adapter)
+{
+ struct uni_table_desc *ptab_descr;
+ const u8 *unirom = adapter->fw->data;
int mn_present = (NX_IS_REVISION_P2(adapter->ahw.revision_id)) ?
1 : netxen_p3_has_mn(adapter);
+ __le32 entries;
+ __le32 entry_size;
+ u32 tab_size;
+ u32 i;
ptab_descr = nx_get_table_desc(unirom, NX_UNI_DIR_SECT_PRODUCT_TBL);
if (ptab_descr == NULL)
- return -1;
+ return -EINVAL;
entries = cpu_to_le32(ptab_descr->num_entries);
+ entry_size = cpu_to_le32(ptab_descr->entry_size);
+ tab_size = cpu_to_le32(ptab_descr->findex) + (entries * entry_size);
+
+ if (adapter->fw->size < tab_size)
+ return -EINVAL;
nomn:
for (i = 0; i < entries; i++) {
@@ -657,9 +758,38 @@ nomn:
goto nomn;
}
- return -1;
+ return -EINVAL;
}
+static int
+netxen_nic_validate_unified_romimage(struct netxen_adapter *adapter)
+{
+ if (netxen_nic_validate_header(adapter)) {
+ dev_err(&adapter->pdev->dev,
+ "unified image: header validation failed\n");
+ return -EINVAL;
+ }
+
+ if (netxen_nic_validate_product_offs(adapter)) {
+ dev_err(&adapter->pdev->dev,
+ "unified image: product validation failed\n");
+ return -EINVAL;
+ }
+
+ if (netxen_nic_validate_bootld(adapter)) {
+ dev_err(&adapter->pdev->dev,
+ "unified image: bootld validation failed\n");
+ return -EINVAL;
+ }
+
+ if (netxen_nic_validate_fw(adapter)) {
+ dev_err(&adapter->pdev->dev,
+ "unified image: firmware validation failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
static struct uni_data_desc *nx_get_data_desc(struct netxen_adapter *adapter,
u32 section, u32 idx_offset)
@@ -933,27 +1063,23 @@ static int
netxen_validate_firmware(struct netxen_adapter *adapter)
{
__le32 val;
- u32 ver, min_ver, bios, min_size;
+ u32 ver, min_ver, bios;
struct pci_dev *pdev = adapter->pdev;
const struct firmware *fw = adapter->fw;
u8 fw_type = adapter->fw_type;
if (fw_type == NX_UNIFIED_ROMIMAGE) {
- if (nx_set_product_offs(adapter))
+ if (netxen_nic_validate_unified_romimage(adapter))
return -EINVAL;
-
- min_size = NX_UNI_FW_MIN_SIZE;
} else {
val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
if ((__force u32)val != NETXEN_BDINFO_MAGIC)
return -EINVAL;
- min_size = NX_FW_MIN_SIZE;
+ if (fw->size < NX_FW_MIN_SIZE)
+ return -EINVAL;
}
- if (fw->size < min_size)
- return -EINVAL;
-
val = nx_get_fw_version(adapter);
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
--
1.6.0.2
next prev parent reply other threads:[~2010-03-29 12:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-29 12:43 [PATCH NEXT 0/5]netxen: fw file validation and fixes Amit Kumar Salecha
2010-03-29 12:43 ` [PATCH NEXT 1/5] netxen: fix tx csum status Amit Kumar Salecha
2010-03-29 12:43 ` [PATCH NEXT 2/5] netxen: fix corner cases of firmware recovery Amit Kumar Salecha
2010-03-29 12:43 ` Amit Kumar Salecha [this message]
2010-03-29 12:43 ` [PATCH NEXT 4/5] netxen: fix fw load from file Amit Kumar Salecha
2010-03-29 12:43 ` [PATCH NEXT 5/5] netxen: fix interrupt for NX2031 Amit Kumar Salecha
2010-03-29 20:18 ` [PATCH NEXT 0/5]netxen: fw file validation and fixes David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269866625-26151-4-git-send-email-amit.salecha@qlogic.com \
--to=amit.salecha@qlogic.com \
--cc=ameen.rahman@qlogic.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=rajesh.borundia@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).