From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andy@greyhouse.net, mcarlson@broadcom.com
Subject: [PATCH net-next 1/8] tg3: Disable CLKREQ in L2
Date: Mon, 12 Apr 2010 09:58:24 -0700 [thread overview]
Message-ID: <1271091511-11173-2-git-send-email-mcarlson@broadcom.com> (raw)
This patch disables CLKREQ in L2 to workaround a chipset bug.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 14 ++++++++++++++
drivers/net/tg3.h | 2 ++
2 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 460a0c2..4ae01b3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7642,6 +7642,20 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(GRC_MODE, grc_mode);
}
+ if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
+ u32 grc_mode = tr32(GRC_MODE);
+
+ /* Access the lower 1K of PL PCIE block registers. */
+ val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
+ tw32(GRC_MODE, val | GRC_MODE_PCIE_PL_SEL);
+
+ val = tr32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL5);
+ tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL5,
+ val | TG3_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ);
+
+ tw32(GRC_MODE, grc_mode);
+ }
+
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision. But do not set this on PCI Express
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5d7f72a..8a6012a 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1854,6 +1854,8 @@
#define TG3_PCIE_TLDLPL_PORT 0x00007c00
#define TG3_PCIE_PL_LO_PHYCTL1 0x00000004
#define TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN 0x00001000
+#define TG3_PCIE_PL_LO_PHYCTL5 0x00000014
+#define TG3_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ 0x80000000
/* OTP bit definitions */
#define TG3_OTP_AGCTGT_MASK 0x000000e0
--
1.6.4.4
reply other threads:[~2010-04-12 16:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271091511-11173-2-git-send-email-mcarlson@broadcom.com \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).