* [PATCH net-next 5/8] tg3: Re-inline VLAN tags when appropriate
@ 2010-04-12 16:58 Matt Carlson
0 siblings, 0 replies; only message in thread
From: Matt Carlson @ 2010-04-12 16:58 UTC (permalink / raw)
To: davem; +Cc: netdev, andy, mcarlson
The tg3 driver is written so that VLAN tagged packets can be accepted,
even if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined.
(Think raw interfaces.) If the device has ASF support enabled, the
firmware requires the driver to enable VLAN tag stripping. If VLAN
tagging is not explicitly supported by the kernel and ASF is enabled,
the driver will have to reinject the VLAN tag back into the packet
stream.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 44 +++++++++++++++++++++++++++++++++-----------
1 files changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5791405..3263f50 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -126,6 +126,9 @@
TG3_TX_RING_SIZE)
#define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1))
+#define TG3_RX_DMA_ALIGN 16
+#define TG3_RX_HEADROOM ALIGN(VLAN_HLEN, TG3_RX_DMA_ALIGN)
+
#define TG3_DMA_BYTE_ENAB 64
#define TG3_RX_STD_DMA_SZ 1536
@@ -4624,6 +4627,8 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
struct sk_buff *skb;
dma_addr_t dma_addr;
u32 opaque_key, desc_idx, *post_ptr;
+ bool hw_vlan __maybe_unused = false;
+ u16 vtag __maybe_unused = 0;
desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
@@ -4682,12 +4687,12 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
tg3_recycle_rx(tnapi, tpr, opaque_key,
desc_idx, *post_ptr);
- copy_skb = netdev_alloc_skb(tp->dev,
- len + TG3_RAW_IP_ALIGN);
+ copy_skb = netdev_alloc_skb(tp->dev, len + VLAN_HLEN +
+ TG3_RAW_IP_ALIGN);
if (copy_skb == NULL)
goto drop_it_no_recycle;
- skb_reserve(copy_skb, TG3_RAW_IP_ALIGN);
+ skb_reserve(copy_skb, TG3_RAW_IP_ALIGN + VLAN_HLEN);
skb_put(copy_skb, len);
pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
skb_copy_from_linear_data(skb, copy_skb->data, len);
@@ -4713,12 +4718,29 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
goto next_pkt;
}
+ if (desc->type_flags & RXD_FLAG_VLAN &&
+ !(tp->rx_mode & RX_MODE_KEEP_VLAN_TAG)) {
+ vtag = desc->err_vlan & RXD_VLAN_MASK;
#if TG3_VLAN_TAG_USED
- if (tp->vlgrp != NULL &&
- desc->type_flags & RXD_FLAG_VLAN) {
- vlan_gro_receive(&tnapi->napi, tp->vlgrp,
- desc->err_vlan & RXD_VLAN_MASK, skb);
- } else
+ if (tp->vlgrp)
+ hw_vlan = true;
+ else
+#endif
+ {
+ struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
+ __skb_push(skb, VLAN_HLEN);
+
+ memmove(ve, skb->data + VLAN_HLEN,
+ ETH_ALEN * 2);
+ ve->h_vlan_proto = htons(ETH_P_8021Q);
+ ve->h_vlan_TCI = htons(vtag);
+ }
+ }
+
+#if TG3_VLAN_TAG_USED
+ if (hw_vlan)
+ vlan_gro_receive(&tnapi->napi, tp->vlgrp, vtag, skb);
+ else
#endif
napi_gro_receive(&tnapi->napi, skb);
@@ -13481,13 +13503,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
else
tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
- tp->rx_offset = NET_IP_ALIGN;
+ tp->rx_offset = NET_IP_ALIGN + TG3_RX_HEADROOM;
tp->rx_copy_thresh = TG3_RX_COPY_THRESHOLD;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
(tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) {
- tp->rx_offset = 0;
+ tp->rx_offset -= NET_IP_ALIGN;
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
- tp->rx_copy_thresh = ~0;
+ tp->rx_copy_thresh = ~(u16)0;
#endif
}
--
1.6.4.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-04-12 16:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-12 16:58 [PATCH net-next 5/8] tg3: Re-inline VLAN tags when appropriate Matt Carlson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).