From: Andrew Hendry <andrew.hendry@gmail.com>
To: netdev@vger.kernel.org, isdn@linux-pingi.de
Subject: [PATCH 2/6] X25: Use identifiers for isdn device to x25 interface
Date: Sun, 18 Apr 2010 19:52:25 +1000 [thread overview]
Message-ID: <1271584345.6280.426.camel@ibex> (raw)
Change magic numbers to identifiers for X25 interface.
also minor check patch formatting.
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
---
drivers/isdn/i4l/isdn_x25iface.c | 17 +++++++++--------
1 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/isdn/i4l/isdn_x25iface.c b/drivers/isdn/i4l/isdn_x25iface.c
index efcf1f9..fd10d7c 100644
--- a/drivers/isdn/i4l/isdn_x25iface.c
+++ b/drivers/isdn/i4l/isdn_x25iface.c
@@ -194,7 +194,7 @@ static int isdn_x25iface_receive(struct concap_proto *cprot, struct sk_buff *skb
if ( ( (ix25_pdata_t*) (cprot->proto_data) )
-> state == WAN_CONNECTED ){
if( skb_push(skb, 1)){
- skb -> data[0]=0x00;
+ skb->data[0] = X25_IFACE_DATA;
skb->protocol = x25_type_trans(skb, cprot->net_dev);
netif_rx(skb);
return 0;
@@ -224,7 +224,7 @@ static int isdn_x25iface_connect_ind(struct concap_proto *cprot)
skb = dev_alloc_skb(1);
if( skb ){
- *( skb_put(skb, 1) ) = 0x01;
+ *(skb_put(skb, 1)) = X25_IFACE_CONNECT;
skb->protocol = x25_type_trans(skb, cprot->net_dev);
netif_rx(skb);
return 0;
@@ -253,7 +253,7 @@ static int isdn_x25iface_disconn_ind(struct concap_proto *cprot)
*state_p = WAN_DISCONNECTED;
skb = dev_alloc_skb(1);
if( skb ){
- *( skb_put(skb, 1) ) = 0x02;
+ *(skb_put(skb, 1)) = X25_IFACE_DISCONNECT;
skb->protocol = x25_type_trans(skb, cprot->net_dev);
netif_rx(skb);
return 0;
@@ -272,9 +272,10 @@ static int isdn_x25iface_xmit(struct concap_proto *cprot, struct sk_buff *skb)
unsigned char firstbyte = skb->data[0];
enum wan_states *state = &((ix25_pdata_t*)cprot->proto_data)->state;
int ret = 0;
- IX25DEBUG( "isdn_x25iface_xmit: %s first=%x state=%d \n", MY_DEVNAME(cprot -> net_dev), firstbyte, *state );
+ IX25DEBUG("isdn_x25iface_xmit: %s first=%x state=%d\n",
+ MY_DEVNAME(cprot->net_dev), firstbyte, *state);
switch ( firstbyte ){
- case 0x00: /* dl_data request */
+ case X25_IFACE_DATA:
if( *state == WAN_CONNECTED ){
skb_pull(skb, 1);
cprot -> net_dev -> trans_start = jiffies;
@@ -285,7 +286,7 @@ static int isdn_x25iface_xmit(struct concap_proto *cprot, struct sk_buff *skb)
}
illegal_state_warn( *state, firstbyte );
break;
- case 0x01: /* dl_connect request */
+ case X25_IFACE_CONNECT:
if( *state == WAN_DISCONNECTED ){
*state = WAN_CONNECTING;
ret = cprot -> dops -> connect_req(cprot);
@@ -298,7 +299,7 @@ static int isdn_x25iface_xmit(struct concap_proto *cprot, struct sk_buff *skb)
illegal_state_warn( *state, firstbyte );
}
break;
- case 0x02: /* dl_disconnect request */
+ case X25_IFACE_DISCONNECT:
switch ( *state ){
case WAN_DISCONNECTED:
/* Should not happen. However, give upper layer a
@@ -318,7 +319,7 @@ static int isdn_x25iface_xmit(struct concap_proto *cprot, struct sk_buff *skb)
illegal_state_warn( *state, firstbyte );
}
break;
- case 0x03: /* changing lapb parameters requested */
+ case X25_IFACE_PARAMS:
printk(KERN_WARNING "isdn_x25iface_xmit: setting of lapb"
" options not yet supported\n");
break;
--
1.5.6.5
next reply other threads:[~2010-04-18 9:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-18 9:52 Andrew Hendry [this message]
2010-04-18 13:41 ` [PATCH 2/6] X25: Use identifiers for isdn device to x25 interface Karsten Keil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271584345.6280.426.camel@ibex \
--to=andrew.hendry@gmail.com \
--cc=isdn@linux-pingi.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).