Netdev List
 help / color / mirror / Atom feed
From: "Vladislav Zolotarov" <vladz@broadcom.com>
To: "Dave Miller" <davem@davemloft.net>
Cc: "netdev list" <netdev@vger.kernel.org>,
	dmitry@broadcom.com, "Eilon Greenstein" <eilong@broadcom.com>
Subject: [PATCH 7/13] bnx2x: Fixed MSI-X enabling flow
Date: Sun, 18 Apr 2010 17:49:31 +0300	[thread overview]
Message-ID: <1271602171.27235.192.camel@lb-tlvb-vladz> (raw)

Try to enable less MSI-X vectors if initial request has failed.

Author: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/bnx2x.h      |   18 +++++++++++++-----
 drivers/net/bnx2x_main.c |   28 +++++++++++++++++++++++++---
 2 files changed, 38 insertions(+), 8 deletions(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a9130f6..7abb2de 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -24,16 +24,25 @@
 #define BCM_VLAN			1
 #endif
 
+#define BNX2X_MULTI_QUEUE
+
+#define BNX2X_NEW_NAPI
+
+
+
 #if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
 #define BCM_CNIC 1
 #include "cnic_if.h"
 #endif
 
-#define BNX2X_MULTI_QUEUE
-
-#define BNX2X_NEW_NAPI
-
 
+#ifdef BCM_CNIC
+#define BNX2X_MIN_MSIX_VEC_CNT 3
+#define BNX2X_MSIX_VEC_FP_START 2
+#else
+#define BNX2X_MIN_MSIX_VEC_CNT 2
+#define BNX2X_MSIX_VEC_FP_START 1
+#endif
 
 #include <linux/mdio.h>
 #include "bnx2x_reg.h"
@@ -859,7 +868,6 @@ struct bnx2x {
 #endif
 #define INT_MODE_INTx			1
 #define INT_MODE_MSI			2
-#define INT_MODE_MSIX			3
 
 	int			tx_ring_size;
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 25a8bbf..484ff2b 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -7430,7 +7430,31 @@ static int bnx2x_enable_msix(struct bnx2x *bp)
 
 	rc = pci_enable_msix(bp->pdev, &bp->msix_table[0],
 			     BNX2X_NUM_QUEUES(bp) + offset);
-	if (rc) {
+
+	/*
+	 * reconfigure number of tx/rx queues according to available
+	 * MSI-X vectors
+	 */
+	if (rc >= BNX2X_MIN_MSIX_VEC_CNT) {
+		/* vectors available for FP */
+		int fp_vec = rc - BNX2X_MSIX_VEC_FP_START;
+
+		DP(NETIF_MSG_IFUP,
+		   "Trying to use less MSI-X vectors: %d\n", rc);
+
+		rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
+
+		if (rc) {
+			DP(NETIF_MSG_IFUP,
+			   "MSI-X is not attainable  rc %d\n", rc);
+			return rc;
+		}
+
+		bp->num_queues = min(bp->num_queues, fp_vec);
+
+		DP(NETIF_MSG_IFUP, "New queue configuration set: %d\n",
+				  bp->num_queues);
+	} else if (rc) {
 		DP(NETIF_MSG_IFUP, "MSI-X is not attainable  rc %d\n", rc);
 		return rc;
 	}
@@ -7853,8 +7877,6 @@ static int bnx2x_set_num_queues(struct bnx2x *bp)
 		bp->num_queues = 1;
 		DP(NETIF_MSG_IFUP, "set number of queues to 1\n");
 		break;
-
-	case INT_MODE_MSIX:
 	default:
 		/* Set number of queues according to bp->multi_mode value */
 		bnx2x_set_num_queues_msix(bp);
-- 
1.6.3.3





                 reply	other threads:[~2010-04-18 14:49 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1271602171.27235.192.camel@lb-tlvb-vladz \
    --to=vladz@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=dmitry@broadcom.com \
    --cc=eilong@broadcom.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox