From: Andy Fleming <afleming@freescale.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [RFC 0/2] phylib: Add support for MDIO clause 45
Date: Thu, 22 Apr 2010 23:38:15 -0500 [thread overview]
Message-ID: <1271997497-6896-1-git-send-email-afleming@freescale.com> (raw)
MDIO Clause 45 adds a new argument for accessing PHY registers, so
that you need the PHY address, the "device" address, and the register
address (which can now be up to 65,535). It's best if, moving forward
we add this new device address argument to the MDIO read/write functions,
which means all of the current bus drivers need to be modified.
I opted not to modify the phy read/write functions mostly because all of the
existing code which calls those functions is correct as-is, and any code which
accesses the new 10G PHYs must do so in a fashion quite distinct from that
of accessing older PHYs (the registers are layed out differently, and the
initialization sequences are also quite different).
However, the MDIO buses are technically allowed to use both access mechanisms
on the same bus, so there's an advantage to adding support to all of the
current implementations.
Andy Fleming (1):
phylib: Convert MDIO bitbang to new MDIO 45 format
Kumar Gala (1):
phylib: Convert MDIO and PHY Lib drivers to support 10G
Documentation/networking/phy.txt | 13 ++-
arch/powerpc/platforms/pasemi/gpio_mdio.c | 6 +-
drivers/net/arm/ixp4xx_eth.c | 7 +-
drivers/net/au1000_eth.c | 7 +-
drivers/net/bcm63xx_enet.c | 4 +-
drivers/net/bfin_mac.c | 7 +-
drivers/net/cpmac.c | 4 +-
drivers/net/davinci_emac.c | 5 +-
drivers/net/dnet.c | 7 +-
drivers/net/ethoc.c | 5 +-
drivers/net/fec.c | 7 +-
drivers/net/fec_mpc52xx_phy.c | 7 +-
drivers/net/fs_enet/mii-fec.c | 6 +-
drivers/net/fsl_pq_mdio.c | 11 +-
drivers/net/fsl_pq_mdio.h | 11 ++-
drivers/net/greth.c | 5 +-
drivers/net/ll_temac_mdio.c | 5 +-
drivers/net/macb.c | 7 +-
drivers/net/mv643xx_eth.c | 5 +-
drivers/net/phy/fixed.c | 5 +-
drivers/net/phy/icplus.c | 12 +-
drivers/net/phy/mdio-bitbang.c | 28 +++---
drivers/net/phy/mdio-octeon.c | 5 +-
drivers/net/phy/mdio_bus.c | 8 +-
drivers/net/phy/phy_device.c | 164 ++++++++++++++++++++++++++---
drivers/net/s6gmac.c | 5 +-
drivers/net/sb1250-mac.c | 14 ++-
drivers/net/smsc911x.c | 19 ++--
drivers/net/smsc9420.c | 9 +-
drivers/net/stmmac/stmmac_mdio.c | 9 +-
drivers/net/tc35815.c | 5 +-
drivers/net/tg3.c | 5 +-
drivers/net/xilinx_emaclite.c | 9 +-
include/linux/phy.h | 53 ++++++++--
34 files changed, 340 insertions(+), 139 deletions(-)
next reply other threads:[~2010-04-23 4:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-23 4:38 Andy Fleming [this message]
2010-04-23 4:38 ` [RFC 1/2] phylib: Convert MDIO and PHY Lib drivers to support 10G Andy Fleming
2010-04-23 4:38 ` [RFC 2/2] phylib: Convert MDIO bitbang to new MDIO 45 format Andy Fleming
2010-04-23 10:22 ` Ben Hutchings
2010-04-23 19:39 ` Andy Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271997497-6896-1-git-send-email-afleming@freescale.com \
--to=afleming@freescale.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).