[PATCH] drivers/net/e1000/e1000_main.c: Fix message logging defect

[Joe Perches <joe@perches.com>]

commit 675ad47375c76a7c3be4ace9554d92cd55518ced
removed the capability to use ethtool.set_msglevel to
control the types of messages emitted by the driver.

That commit should probably be reverted.

If not, then this patch fixes a message logging defect
introduced by converting a printk without KERN_<level>
to e_info.

This also reduces text by about 200 bytes.

Signed-off-by: Joe Perches <joe@perches.com>
---
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ebdea08..68a8089 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1047,15 +1047,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		goto err_register;
 
 	/* print bus type/speed/width info */
-	e_info("(PCI%s:%s:%s) ",
-		((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
-		((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
-		 (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
-		 (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
-		 (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
-		((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
-
-	e_info("%pM\n", netdev->dev_addr);
+	e_info("(PCI%s:%dMHz:%d-bit) %pM\n",
+	       ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+	       ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
+		(hw->bus_speed == e1000_bus_speed_120) ? 120 :
+		(hw->bus_speed == e1000_bus_speed_100) ? 100 :
+		(hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
+	       ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
+	       netdev->dev_addr);
 
 	/* carrier off reporting is important to ethtool even BEFORE open */
 	netif_carrier_off(netdev);