Netdev List
 help / color / mirror / Atom feed
From: Eric Dumazet <eric.dumazet@gmail.com>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>
Subject: [PATCH net-next-2.6] loopback: use u64_stats_sync infrastructure
Date: Wed, 23 Jun 2010 00:44:11 +0200	[thread overview]
Message-ID: <1277246651.2591.249.camel@edumazet-laptop> (raw)

Commit 6b10de38f0ef (loopback: Implement 64bit stats on 32bit arches)
introduced 64bit stats in loopback driver, using a private seqcount and
private helpers.

David suggested to introduce a generic infrastructure, added in (net:
Introduce u64_stats_sync infrastructure)

This patch reimplements loopback 64bit stats using the u64_stats_sync
infrastructure.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
 drivers/net/loopback.c |   62 ++++++++++-----------------------------
 1 file changed, 16 insertions(+), 46 deletions(-)

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 09334f8..4dd0510 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -58,53 +58,15 @@
 #include <linux/tcp.h>
 #include <linux/percpu.h>
 #include <net/net_namespace.h>
+#include <linux/u64_stats_sync.h>
 
 struct pcpu_lstats {
-	u64 packets;
-	u64 bytes;
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	seqcount_t seq;
-#endif
-	unsigned long drops;
+	u64			packets;
+	u64			bytes;
+	struct u64_stats_sync	syncp;
+	unsigned long		drops;
 };
 
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-static void inline lstats_update_begin(struct pcpu_lstats *lstats)
-{
-	write_seqcount_begin(&lstats->seq);
-}
-static void inline lstats_update_end(struct pcpu_lstats *lstats)
-{
-	write_seqcount_end(&lstats->seq);
-}
-static void inline lstats_fetch_and_add(u64 *packets, u64 *bytes, const struct pcpu_lstats *lstats)
-{
-	u64 tpackets, tbytes;
-	unsigned int seq;
-
-	do {
-		seq = read_seqcount_begin(&lstats->seq);
-		tpackets = lstats->packets;
-		tbytes = lstats->bytes;
-	} while (read_seqcount_retry(&lstats->seq, seq));
-
-	*packets += tpackets;
-	*bytes += tbytes;
-}
-#else
-static void inline lstats_update_begin(struct pcpu_lstats *lstats)
-{
-}
-static void inline lstats_update_end(struct pcpu_lstats *lstats)
-{
-}
-static void inline lstats_fetch_and_add(u64 *packets, u64 *bytes, const struct pcpu_lstats *lstats)
-{
-	*packets += lstats->packets;
-	*bytes += lstats->bytes;
-}
-#endif
-
 /*
  * The higher levels take care of making this non-reentrant (it's
  * called with bh's disabled).
@@ -126,10 +88,10 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb,
 
 	len = skb->len;
 	if (likely(netif_rx(skb) == NET_RX_SUCCESS)) {
-		lstats_update_begin(lb_stats);
+		u64_stats_update_begin(&lb_stats->syncp);
 		lb_stats->bytes += len;
 		lb_stats->packets++;
-		lstats_update_end(lb_stats);
+		u64_stats_update_end(&lb_stats->syncp);
 	} else
 		lb_stats->drops++;
 
@@ -148,10 +110,18 @@ static struct rtnl_link_stats64 *loopback_get_stats64(struct net_device *dev)
 	pcpu_lstats = (void __percpu __force *)dev->ml_priv;
 	for_each_possible_cpu(i) {
 		const struct pcpu_lstats *lb_stats;
+		u64 tbytes, tpackets;
+		unsigned int start;
 
 		lb_stats = per_cpu_ptr(pcpu_lstats, i);
-		lstats_fetch_and_add(&packets, &bytes, lb_stats);
+		do {
+			start = u64_stats_fetch_begin(&lb_stats->syncp);
+			tbytes = lb_stats->bytes;
+			tpackets = lb_stats->packets;
+		} while (u64_stats_fetch_retry(&lb_stats->syncp, start));
 		drops   += lb_stats->drops;
+		bytes   += tbytes;
+		packets += tpackets;
 	}
 	stats->rx_packets = packets;
 	stats->tx_packets = packets;



             reply	other threads:[~2010-06-22 22:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-22 22:44 Eric Dumazet [this message]
2010-06-26  4:34 ` [PATCH net-next-2.6] loopback: use u64_stats_sync infrastructure David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1277246651.2591.249.camel@edumazet-laptop \
    --to=eric.dumazet@gmail.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox