From: Karl Hiramoto <karl@hiramoto.org>
To: linux-atm-general@lists.sourceforge.net, netdev@vger.kernel.org,
chas@cmf.nrl.navy.mil, davem@davemloft.net
Cc: Karl Hiramoto <karl@hiramoto.org>
Subject: [PATCH v5 7/9] usb/atm/cxacru.c: call atm_dev_signal_change() when signal changes.
Date: Fri, 9 Jul 2010 08:55:36 +0200 [thread overview]
Message-ID: <1278658538-6769-8-git-send-email-karl@hiramoto.org> (raw)
In-Reply-To: <1278658538-6769-1-git-send-email-karl@hiramoto.org>
Propagate signal changes to upper atm layer.
Signed-off-by: Karl Hiramoto <karl@hiramoto.org>
---
drivers/usb/atm/cxacru.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index c89990f..101ffc9 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -866,50 +866,50 @@ static void cxacru_poll_status(struct work_struct *work)
instance->line_status = buf[CXINF_LINE_STATUS];
switch (instance->line_status) {
case 0:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: down\n");
break;
case 1:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: attempting to activate\n");
break;
case 2:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: training\n");
break;
case 3:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: channel analysis\n");
break;
case 4:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: exchange\n");
break;
case 5:
atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
- atm_dev->signal = ATM_PHY_SIG_FOUND;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
break;
case 6:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: waiting\n");
break;
case 7:
- atm_dev->signal = ATM_PHY_SIG_LOST;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
atm_info(usbatm, "ADSL line: initializing\n");
break;
default:
- atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
+ atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
break;
}
--
1.7.1
next prev parent reply other threads:[~2010-07-09 6:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-09 6:55 [PATCH v5 0/9] atm: propagate atm_dev signal carrier to LOWER_UP of netdevice Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 1/9] atm: propagate signal changes via notifier Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 2/9] atm/br2684: register notifier event for carrier signal changes Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 3/9] atm/adummy: add syfs DEVICE_ATTR to change signal Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 4/9] atm/idt77105.c: call atm_dev_signal_change() when signal changes Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 5/9] atm/solos-pci: " Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 6/9] atm/suni.c: " Karl Hiramoto
2010-07-09 6:55 ` Karl Hiramoto [this message]
2010-07-09 6:55 ` [PATCH v5 8/9] usb/atm/speedtch.c: " Karl Hiramoto
2010-07-09 6:55 ` [PATCH v5 9/9] usb/atm/ueagle-atm.c: " Karl Hiramoto
2010-07-09 7:10 ` [PATCH v5 0/9] atm: propagate atm_dev signal carrier to LOWER_UP of netdevice David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1278658538-6769-8-git-send-email-karl@hiramoto.org \
--to=karl@hiramoto.org \
--cc=chas@cmf.nrl.navy.mil \
--cc=davem@davemloft.net \
--cc=linux-atm-general@lists.sourceforge.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).