From: Tobias Klauser <tklauser@distanz.ch>
To: "David S. Miller" <davem@davemloft.net>,
Russell King <linux@arm.linux.org.uk>,
netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
kernel-janitors@vger.kernel.org,
Stephen Hemminger <shemminger@vyatta.com>,
Eric Dumazet <eric.dumazet@gmail.com>,
Dan Carpenter <error27@gmail.com>
Subject: [PATCH v4] ether3: Use net_device_stats from struct net_device
Date: Thu, 19 Aug 2010 08:15:31 +0200 [thread overview]
Message-ID: <1282198531-4157-1-git-send-email-tklauser@distanz.ch> (raw)
In-Reply-To: <1282061733-19700-1-git-send-email-tklauser@distanz.ch>
struct net_device has its own struct net_device_stats member, so use
this one instead of a private copy in the ether1_priv struct. As the new
ndo_get_stats function would just return dev->stats we can omit it. This
patch also removes an incorrect memset of the stats on open.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
---
drivers/net/arm/ether3.c | 33 ++++++++++-----------------------
drivers/net/arm/ether3.h | 1 -
2 files changed, 10 insertions(+), 24 deletions(-)
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 1361b73..44a8746 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -81,7 +81,6 @@ static int ether3_open (struct net_device *dev);
static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev);
static irqreturn_t ether3_interrupt (int irq, void *dev_id);
static int ether3_close (struct net_device *dev);
-static struct net_device_stats *ether3_getstats (struct net_device *dev);
static void ether3_setmulticastlist (struct net_device *dev);
static void ether3_timeout(struct net_device *dev);
@@ -323,8 +322,6 @@ ether3_init_for_open(struct net_device *dev)
{
int i;
- memset(&priv(dev)->stats, 0, sizeof(struct net_device_stats));
-
/* Reset the chip */
ether3_outw(CFG2_RESET, REG_CONFIG2);
udelay(4);
@@ -442,15 +439,6 @@ ether3_close(struct net_device *dev)
}
/*
- * Get the current statistics. This may be called with the card open or
- * closed.
- */
-static struct net_device_stats *ether3_getstats(struct net_device *dev)
-{
- return &priv(dev)->stats;
-}
-
-/*
* Set or clear promiscuous/multicast mode filter for this adaptor.
*
* We don't attempt any packet filtering. The card may have a SEEQ 8004
@@ -490,7 +478,7 @@ static void ether3_timeout(struct net_device *dev)
local_irq_restore(flags);
priv(dev)->regs.config2 |= CFG2_CTRLO;
- priv(dev)->stats.tx_errors += 1;
+ dev->stats.tx_errors += 1;
ether3_outw(priv(dev)->regs.config2, REG_CONFIG2);
priv(dev)->tx_head = priv(dev)->tx_tail = 0;
@@ -509,7 +497,7 @@ ether3_sendpacket(struct sk_buff *skb, struct net_device *dev)
if (priv(dev)->broken) {
dev_kfree_skb(skb);
- priv(dev)->stats.tx_dropped ++;
+ dev->stats.tx_dropped++;
netif_start_queue(dev);
return NETDEV_TX_OK;
}
@@ -673,7 +661,7 @@ if (next_ptr < RX_START || next_ptr >= RX_END) {
} else
goto dropping;
} else {
- struct net_device_stats *stats = &priv(dev)->stats;
+ struct net_device_stats *stats = &dev->stats;
ether3_outw(next_ptr >> 8, REG_RECVEND);
if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++;
if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++;
@@ -685,14 +673,14 @@ if (next_ptr < RX_START || next_ptr >= RX_END) {
while (-- maxcnt);
done:
- priv(dev)->stats.rx_packets += received;
+ dev->stats.rx_packets += received;
priv(dev)->rx_head = next_ptr;
/*
* If rx went off line, then that means that the buffer may be full. We
* have dropped at least one packet.
*/
if (!(ether3_inw(REG_STATUS) & STAT_RXON)) {
- priv(dev)->stats.rx_dropped ++;
+ dev->stats.rx_dropped++;
ether3_outw(next_ptr, REG_RECVPTR);
ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
}
@@ -710,7 +698,7 @@ dropping:{
last_warned = jiffies;
printk("%s: memory squeeze, dropping packet.\n", dev->name);
}
- priv(dev)->stats.rx_dropped ++;
+ dev->stats.rx_dropped++;
goto done;
}
}
@@ -743,13 +731,13 @@ static void ether3_tx(struct net_device *dev)
* Update errors
*/
if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS)))
- priv(dev)->stats.tx_packets++;
+ dev->stats.tx_packets++;
else {
- priv(dev)->stats.tx_errors ++;
+ dev->stats.tx_errors++;
if (status & TXSTAT_16COLLISIONS)
- priv(dev)->stats.collisions += 16;
+ dev->stats.collisions += 16;
if (status & TXSTAT_BABBLED)
- priv(dev)->stats.tx_fifo_errors ++;
+ dev->stats.tx_fifo_errors++;
}
tx_tail = (tx_tail + 1) & 15;
@@ -773,7 +761,6 @@ static const struct net_device_ops ether3_netdev_ops = {
.ndo_open = ether3_open,
.ndo_stop = ether3_close,
.ndo_start_xmit = ether3_sendpacket,
- .ndo_get_stats = ether3_getstats,
.ndo_set_multicast_list = ether3_setmulticastlist,
.ndo_tx_timeout = ether3_timeout,
.ndo_validate_addr = eth_validate_addr,
diff --git a/drivers/net/arm/ether3.h b/drivers/net/arm/ether3.h
index 1921a3a..2db63b0 100644
--- a/drivers/net/arm/ether3.h
+++ b/drivers/net/arm/ether3.h
@@ -164,7 +164,6 @@ struct dev_priv {
unsigned char tx_head; /* buffer nr to insert next packet */
unsigned char tx_tail; /* buffer nr of transmitting packet */
unsigned int rx_head; /* address to fetch next packet from */
- struct net_device_stats stats;
struct timer_list timer;
int broken; /* 0 = ok, 1 = something went wrong */
};
--
1.7.0.4
next prev parent reply other threads:[~2010-08-19 6:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-17 16:15 [PATCH] ether3: Use net_device_stats from struct net_device Tobias Klauser
2010-08-17 18:35 ` Dan Carpenter
2010-08-17 18:53 ` Tobias Klauser
2010-08-18 7:04 ` [PATCH v2] " Tobias Klauser
2010-08-18 8:46 ` [PATCH v3] " Tobias Klauser
2010-08-19 6:15 ` Tobias Klauser [this message]
2010-08-19 7:13 ` [PATCH v4] " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1282198531-4157-1-git-send-email-tklauser@distanz.ch \
--to=tklauser@distanz.ch \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=error27@gmail.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).