From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
To: davem@davemloft.net
Cc: dccp@vger.kernel.org, netdev@vger.kernel.org,
Gerrit Renker <gerrit@erg.abdn.ac.uk>
Subject: [PATCH 3/5] tcp/dccp: Consolidate common code for RFC 3390 conversion
Date: Mon, 30 Aug 2010 07:23:12 +0200 [thread overview]
Message-ID: <1283145794-5615-4-git-send-email-gerrit@erg.abdn.ac.uk> (raw)
In-Reply-To: <1283145794-5615-3-git-send-email-gerrit@erg.abdn.ac.uk>
This patch consolidates initial-window code common to TCP and CCID-2:
* TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and
* CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
---
include/net/tcp.h | 15 +++++++++++++++
net/dccp/ccids/ccid2.c | 8 ++------
net/ipv4/tcp_input.c | 17 ++---------------
3 files changed, 19 insertions(+), 21 deletions(-)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -789,6 +789,21 @@ static inline __u32 tcp_current_ssthresh(const struct sock *sk)
/* Use define here intentionally to get WARN_ON location shown at the caller */
#define tcp_verify_left_out(tp) WARN_ON(tcp_left_out(tp) > tp->packets_out)
+/*
+ * Convert RFC 3390 larger initial window into an equivalent number of packets.
+ *
+ * John Heffner states:
+ *
+ * The RFC specifies a window of no more than 4380 bytes
+ * unless 2*MSS > 4380. Reading the pseudocode in the RFC
+ * is a bit misleading because they use a clamp at 4380 bytes
+ * rather than a multiplier in the relevant range.
+ */
+static inline u32 rfc3390_bytes_to_packets(const u32 smss)
+{
+ return smss <= 1095 ? 4 : (smss > 1460 ? 2 : 3);
+}
+
extern void tcp_enter_cwr(struct sock *sk, const int set_ssthresh);
extern __u32 tcp_init_cwnd(struct tcp_sock *tp, struct dst_entry *dst);
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -641,12 +641,8 @@ static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk)
/* RFC 4341, 5: initialise ssthresh to arbitrarily high (max) value */
hc->tx_ssthresh = ~0U;
- /*
- * RFC 4341, 5: "The cwnd parameter is initialized to at most four
- * packets for new connections, following the rules from [RFC3390]".
- * We need to convert the bytes of RFC3390 into the packets of RFC 4341.
- */
- hc->tx_cwnd = clamp(4380U / dp->dccps_mss_cache, 2U, 4U);
+ /* Use larger initial windows (RFC 4341, section 5). */
+ hc->tx_cwnd = rfc3390_bytes_to_packets(dp->dccps_mss_cache);
/* Make sure that Ack Ratio is enabled and within bounds. */
max_ratio = DIV_ROUND_UP(hc->tx_cwnd, 2);
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -805,25 +805,12 @@ void tcp_update_metrics(struct sock *sk)
}
}
-/* Numbers are taken from RFC3390.
- *
- * John Heffner states:
- *
- * The RFC specifies a window of no more than 4380 bytes
- * unless 2*MSS > 4380. Reading the pseudocode in the RFC
- * is a bit misleading because they use a clamp at 4380 bytes
- * rather than use a multiplier in the relevant range.
- */
__u32 tcp_init_cwnd(struct tcp_sock *tp, struct dst_entry *dst)
{
__u32 cwnd = (dst ? dst_metric(dst, RTAX_INITCWND) : 0);
- if (!cwnd) {
- if (tp->mss_cache > 1460)
- cwnd = 2;
- else
- cwnd = (tp->mss_cache > 1095) ? 3 : 4;
- }
+ if (!cwnd)
+ cwnd = rfc3390_bytes_to_packets(tp->mss_cache);
return min_t(__u32, cwnd, tp->snd_cwnd_clamp);
}
next prev parent reply other threads:[~2010-08-30 5:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <ccid2_and_tcp_code_sharing>
2010-08-30 5:23 ` net-2.6 [PATCH 0/5] dccp: ccid-2 clean-up; code sharing between TCP and DCCP Gerrit Renker
2010-08-30 5:23 ` [PATCH 1/5] dccp ccid-2: Use u32 timestamps uniformly Gerrit Renker
2010-08-30 5:23 ` [PATCH 2/5] dccp ccid-2: Remove wrappers around sk_{reset,stop}_timer() Gerrit Renker
2010-08-30 5:23 ` Gerrit Renker [this message]
2010-08-30 5:23 ` [PATCH 4/5] dccp ccid-2: Share TCP's minimum RTO code Gerrit Renker
2010-08-30 5:23 ` [PATCH 5/5] dccp ccid-3: use per-route RTO or TCP RTO as fallback Gerrit Renker
2010-08-30 12:59 ` [PATCH 3/5] tcp/dccp: Consolidate common code for RFC 3390 conversion Ilpo Järvinen
2010-09-01 5:23 ` Gerrit Renker
2010-09-01 5:34 ` net-next-2.6 [PATCH 1/1] tcp: add missing initial window (RFC 3390) for tcp_output Gerrit Renker
2010-09-01 7:06 ` Alexander Zimmermann
2010-09-01 10:16 ` Gerrit Renker
2010-09-01 10:28 ` Gerrit Renker
2010-09-02 1:18 ` David Miller
2010-09-01 7:05 ` [PATCH 3/5] tcp/dccp: Consolidate common code for RFC 3390 conversion Alexander Zimmermann
2010-08-30 20:46 ` net-2.6 [PATCH 0/5] dccp: ccid-2 clean-up; code sharing between TCP and DCCP David Miller
2010-08-31 10:38 ` gerrit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283145794-5615-4-git-send-email-gerrit@erg.abdn.ac.uk \
--to=gerrit@erg.abdn.ac.uk \
--cc=davem@davemloft.net \
--cc=dccp@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).