From: Priit Laes <plaes@plaes.org>
To: netdev@vger.kernel.org, e1000-devel@lists.sourceforge.net
Subject: REGRESSION: e1000e fails to communicate (82566DM)
Date: Mon, 06 Sep 2010 23:51:44 +0300 [thread overview]
Message-ID: <1283806304.6947.13.camel@chi> (raw)
Heya!
After trying out newer 2.6.35-rc3 kernel, the network interface fails to
communicate (via dhcp and manual IP setup).
This seems to be a regression since 2.6.34-rc5:
lspci:
00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
Subsystem: Intel Corporation Device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 90324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 20e0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41c9
Kernel driver in use: e1000e
ethtool:
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0x00000001 (1)
drv
Link detected: yes
next reply other threads:[~2010-09-06 20:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-06 20:51 Priit Laes [this message]
2010-09-09 17:51 ` REGRESSION: e1000e fails to communicate (82566DM) Tantilov, Emil S
2010-09-10 9:57 ` Priit Laes
2010-09-10 17:21 ` Tantilov, Emil S
2010-09-21 7:26 ` REGRESSION: e1000e fails to communicate in 2.6.36-rcx (82566DM) Priit Laes
2010-09-21 16:36 ` Tantilov, Emil S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283806304.6947.13.camel@chi \
--to=plaes@plaes.org \
--cc=e1000-devel@lists.sourceforge.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).