netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andy@greyhouse.net, mcarlson@broadcom.com
Subject: [PATCH net-next 5/9] tg3: Clarify semantics of TG3_IRQ_MAX_VECS
Date: Wed, 15 Sep 2010 11:59:57 -0700	[thread overview]
Message-ID: <1284577201-6117-6-git-send-email-mcarlson@broadcom.com> (raw)

TG3_IRQ_MAX_VECS should be seen as the maximum number of vectors that
any device could be expected to use.  tp->irq_max represents the maximum
number of vectors the current device can use.  This patch clarifies the
semantics of the code to match the above description.

Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
---
 drivers/net/tg3.c |    6 +++---
 drivers/net/tg3.h |    3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4e92b81..7468479 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7564,7 +7564,7 @@ static void tg3_rings_reset(struct tg3 *tp)
 
 	/* Zero mailbox registers. */
 	if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX) {
-		for (i = 1; i < TG3_IRQ_MAX_VECS; i++) {
+		for (i = 1; i < tp->irq_max; i++) {
 			tp->napi[i].tx_prod = 0;
 			tp->napi[i].tx_cons = 0;
 			if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
@@ -9886,7 +9886,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 		tp->rx_pending = 63;
 	tp->rx_jumbo_pending = ering->rx_jumbo_pending;
 
-	for (i = 0; i < TG3_IRQ_MAX_VECS; i++)
+	for (i = 0; i < tp->irq_max; i++)
 		tp->napi[i].tx_pending = ering->tx_pending;
 
 	if (netif_running(dev)) {
@@ -14598,7 +14598,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
 	rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
 	sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
-	for (i = 0; i < TG3_IRQ_MAX_VECS; i++) {
+	for (i = 0; i < tp->irq_max; i++) {
 		struct tg3_napi *tnapi = &tp->napi[i];
 
 		tnapi->tp = tp;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5cd0653..d39426f 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2659,7 +2659,8 @@ struct tg3_rx_prodring_set {
 	dma_addr_t			rx_jmb_mapping;
 };
 
-#define TG3_IRQ_MAX_VECS 5
+#define TG3_IRQ_MAX_VECS_RSS		5
+#define TG3_IRQ_MAX_VECS		TG3_IRQ_MAX_VECS_RSS
 
 struct tg3_napi {
 	struct napi_struct		napi	____cacheline_aligned;
-- 
1.7.1



                 reply	other threads:[~2010-09-15 19:01 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1284577201-6117-6-git-send-email-mcarlson@broadcom.com \
    --to=mcarlson@broadcom.com \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).