From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stanislaw Gruszka Subject: [PATCH 6/8] r8169: changing mtu clean up Date: Thu, 21 Oct 2010 10:25:41 +0200 Message-ID: <1287649543-6569-7-git-send-email-sgruszka@redhat.com> References: <1287649543-6569-1-git-send-email-sgruszka@redhat.com> Cc: Denis Kirjanov , Stanislaw Gruszka To: Francois Romieu , netdev@vger.kernel.org Return-path: Received: from mx1.redhat.com ([209.132.183.28]:28296 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751223Ab0JUIXe (ORCPT ); Thu, 21 Oct 2010 04:23:34 -0400 In-Reply-To: <1287649543-6569-1-git-send-email-sgruszka@redhat.com> Sender: netdev-owner@vger.kernel.org List-ID: Since we do not change rx buffer size any longer, we can clean up rtl8169_change_mtu and in consequence rtl8169_down. Signed-off-by: Stanislaw Gruszka --- drivers/net/r8169.c | 47 ++++++----------------------------------------- 1 files changed, 6 insertions(+), 41 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index ef304c5..ad3f37a 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3908,31 +3908,11 @@ static void rtl_hw_start_8101(struct net_device *dev) static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) { - struct rtl8169_private *tp = netdev_priv(dev); - int ret = 0; - if (new_mtu < ETH_ZLEN || new_mtu > SafeMtu) return -EINVAL; dev->mtu = new_mtu; - - if (!netif_running(dev)) - goto out; - - rtl8169_down(dev); - - ret = rtl8169_init_ring(dev); - if (ret < 0) - goto out; - - napi_enable(&tp->napi); - - rtl_hw_start(dev); - - rtl8169_request_timer(dev); - -out: - return ret; + return 0; } static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc) @@ -4684,7 +4664,6 @@ static void rtl8169_down(struct net_device *dev) { struct rtl8169_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; - unsigned int intrmask; rtl8169_delete_timer(dev); @@ -4692,11 +4671,14 @@ static void rtl8169_down(struct net_device *dev) napi_disable(&tp->napi); -core_down: spin_lock_irq(&tp->lock); rtl8169_asic_down(ioaddr); - + /* + * At this point device interrupts can not be enabled in any function, + * as netif_running is not true (rtl8169_interrupt, rtl8169_reset_task, + * rtl8169_reinit_task) and napi is disabled (rtl8169_poll). + */ rtl8169_rx_missed(dev, ioaddr); spin_unlock_irq(&tp->lock); @@ -4706,23 +4688,6 @@ core_down: /* Give a racing hard_start_xmit a few cycles to complete. */ synchronize_sched(); /* FIXME: should this be synchronize_irq()? */ - /* - * And now for the 50k$ question: are IRQ disabled or not ? - * - * Two paths lead here: - * 1) dev->close - * -> netif_running() is available to sync the current code and the - * IRQ handler. See rtl8169_interrupt for details. - * 2) dev->change_mtu - * -> rtl8169_poll can not be issued again and re-enable the - * interruptions. Let's simply issue the IRQ down sequence again. - * - * No loop if hotpluged or major error (0xffff). - */ - intrmask = RTL_R16(IntrMask); - if (intrmask && (intrmask != 0xffff)) - goto core_down; - rtl8169_tx_clear(tp); rtl8169_rx_clear(tp); -- 1.6.5.2