[PATCH 01/10] can: at91_can: use correct bit to enable CAN_CTRLMODE_3_SAMPLES

[Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

Signed-off-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/net/can/at91_can.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 2d8bd86..b2a4599 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -2,7 +2,7 @@
  * at91_can.c - CAN network driver for AT91 SoC CAN controller
  *
  * (C) 2007 by Hans J. Koch <hjk-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
- * (C) 2008, 2009 by Marc Kleine-Budde <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
+ * (C) 2008, 2009, 2010 by Marc Kleine-Budde <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
  *
  * This software may be distributed under the terms of the GNU General
  * Public License ("GPL") version 2 as distributed in the 'COPYING'
@@ -257,8 +257,8 @@ static int at91_set_bittiming(struct net_device *dev)
 	const struct can_bittiming *bt = &priv->can.bittiming;
 	u32 reg_br;
 
-	reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) << 24) |
-		((bt->brp - 1) << 16) |	((bt->sjw - 1) << 12) |
+	reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 << 24 : 0) |
+		((bt->brp - 1) << 16) | ((bt->sjw - 1) << 12) |
 		((bt->prop_seg - 1) << 8) | ((bt->phase_seg1 - 1) << 4) |
 		((bt->phase_seg2 - 1) << 0);
 
-- 
1.7.0.4