From: David Dillow <dave@thedillows.org>
To: netdev@vger.kernel.org
Cc: jgarzik@redhat.com, davem@davemloft.net, jesse@nicira.com
Subject: [PATCH] Add support for new VLAN acceleration model
Date: Sun, 24 Oct 2010 16:24:40 -0400 [thread overview]
Message-ID: <1287951880-25321-1-git-send-email-dave@thedillows.org> (raw)
Signed-off-by: David Dillow <dave@thedillows.org>
---
I used this during testing of the typhoon conversion.
ethtool-copy.h | 2 ++
ethtool.c | 23 +++++++++++++++++++----
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index 894f1da..557425e 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -308,6 +308,8 @@ struct ethtool_perm_addr {
* flag differs from the read-only value.
*/
enum ethtool_flags {
+ ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
+ ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
ETH_FLAG_RXHASH = (1 << 28),
diff --git a/ethtool.c b/ethtool.c
index 6b2b7c8..b6d3bfb 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -202,6 +202,8 @@ static struct option {
" [ lro on|off ]\n"
" [ ntuple on|off ]\n"
" [ rxhash on|off ]\n"
+ " [ rxvlan on|off ]\n"
+ " [ txvlan on|off ]\n"
},
{ "-i", "--driver", MODE_GDRV, "Show driver information" },
{ "-d", "--register-dump", MODE_GREGS, "Do a register dump",
@@ -439,6 +441,10 @@ static struct cmdline_info cmdline_offload[] = {
ETH_FLAG_NTUPLE, &off_flags_unwanted },
{ "rxhash", CMDL_FLAG, &off_flags_wanted, NULL,
ETH_FLAG_RXHASH, &off_flags_unwanted },
+ { "txvlan", CMDL_FLAG, &off_flags_wanted, NULL,
+ ETH_FLAG_TXVLAN, &off_flags_unwanted },
+ { "rxvlan", CMDL_FLAG, &off_flags_wanted, NULL,
+ ETH_FLAG_RXVLAN, &off_flags_unwanted },
};
static struct cmdline_info cmdline_pause[] = {
@@ -1732,7 +1738,8 @@ static int dump_coalesce(void)
}
static int dump_offload(int rx, int tx, int sg, int tso, int ufo, int gso,
- int gro, int lro, int ntuple, int rxhash)
+ int gro, int lro, int ntuple, int rxhash, int rxvlan,
+ int txvlan)
{
fprintf(stdout,
"rx-checksumming: %s\n"
@@ -1744,7 +1751,9 @@ static int dump_offload(int rx, int tx, int sg, int tso, int ufo, int gso,
"generic-receive-offload: %s\n"
"large-receive-offload: %s\n"
"ntuple-filters: %s\n"
- "receive-hashing: %s\n",
+ "receive-hashing: %s\n"
+ "rx-vlan-offload: %s\n"
+ "tx-vlan-offload: %s\n",
rx ? "on" : "off",
tx ? "on" : "off",
sg ? "on" : "off",
@@ -1754,7 +1763,9 @@ static int dump_offload(int rx, int tx, int sg, int tso, int ufo, int gso,
gro ? "on" : "off",
lro ? "on" : "off",
ntuple ? "on" : "off",
- rxhash ? "on" : "off");
+ rxhash ? "on" : "off",
+ rxvlan ? "on" : "off",
+ txvlan ? "on" : "off");
return 0;
}
@@ -2076,6 +2087,7 @@ static int do_goffload(int fd, struct ifreq *ifr)
struct ethtool_value eval;
int err, allfail = 1, rx = 0, tx = 0, sg = 0;
int tso = 0, ufo = 0, gso = 0, gro = 0, lro = 0, ntuple = 0, rxhash = 0;
+ int rxvlan = 0, txvlan = 0;
fprintf(stdout, "Offload parameters for %s:\n", devname);
@@ -2148,6 +2160,8 @@ static int do_goffload(int fd, struct ifreq *ifr)
lro = (eval.data & ETH_FLAG_LRO) != 0;
ntuple = (eval.data & ETH_FLAG_NTUPLE) != 0;
rxhash = (eval.data & ETH_FLAG_RXHASH) != 0;
+ rxvlan = (eval.data & ETH_FLAG_RXVLAN) != 0;
+ txvlan = (eval.data & ETH_FLAG_TXVLAN) != 0;
allfail = 0;
}
@@ -2166,7 +2180,8 @@ static int do_goffload(int fd, struct ifreq *ifr)
return 83;
}
- return dump_offload(rx, tx, sg, tso, ufo, gso, gro, lro, ntuple, rxhash);
+ return dump_offload(rx, tx, sg, tso, ufo, gso, gro, lro, ntuple, rxhash,
+ rxvlan, txvlan);
}
static int do_soffload(int fd, struct ifreq *ifr)
--
1.7.2.3
next reply other threads:[~2010-10-24 20:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-24 20:24 David Dillow [this message]
2010-10-26 2:22 ` [PATCH] Add support for new VLAN acceleration model Jesse Gross
2010-10-26 2:48 ` David Dillow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287951880-25321-1-git-send-email-dave@thedillows.org \
--to=dave@thedillows.org \
--cc=davem@davemloft.net \
--cc=jesse@nicira.com \
--cc=jgarzik@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).